StarTech.com 2x2in Open Slot Wiring Cable Raceway Duct with Cover, Server Rack Cable Management, Cable Cover Duct, Cord Hider / Organizer, PVC Cable Manager, TAA Compliant (AD2X2)

I'm so pleased with this cabling raceway. It was easy to cut to length with my miter saw, easy to install, and it's easy to add, remove, and position items. It's even large enough to fit the power bricks for my laptop and monitor with room to spare for all of the additional power and data cables I wanted to conceal. In the past, I've used adhesive clasps, velcro wraps, and other cable management solutions, but they were just cumbersome and inadequate -- especially for power bricks. Either the adhesive would eventually fail, or the multiple coils of cables still looked messy. Plus, it would be a major hassle to reconfigure when adding/removing items. Now it's all contained and concealed but easily accessible. Love it! BONUS: The length is generous! I ended up needing less than half the length, so I have plenty left over for other applications. I can think of only two improvements to the product: 1) Include mounting screws. 2) Offer it in black.

The cable raceway performs exactly as described, and the picture is very accurate. I used this during a full rewire of my fishing boat, and I couldn't be happier. This product offered the ideal spacing of the wires. The wire runs are compact enough to be neat and orderly but spaced adequately to allow for proper heat dissipation during heavy use. In my particular application, I used a small handheld saw to cut the cable raceway in sections of 6 wire runs each. The raceway cut easily yet retained its rigidity. The top holds very securely. PVC is strong enough to keep its shape over time, and I'm not concerned with damage to my wires due to prolonged vibration of my boat engine. I have read other reviews that compare this product to similar products by other manufacturers, but I cannot attest to this comparison; this is the first cable raceway I've purchased, and I'm so please with it that I intend to purchase from this manufacturer exclusively from now on.

I bought this item to tame my desk's nest of cables. I have a pretty simple desk setup, but there is still a lot of cables. I like a clean look, so I put a lot of work into my cable management. I like to stand back from it and not see cables hanging from my desk. It's nice when people ask if a device is wireless or "where's your cables?". It is sooooo satisfying and this simple little wiring channel has helped me achieve that. This came in two pieces, both made of a easily cut type of plastic. One side has openings for screws to be attached and openings for cables to go in and out of the channel. The other side is a simple flat piece that clicks onto the other side and works like a cover to hold the wires in the channel. I mounted mine to the back of my desk using short wood screws. The channel runs horizontally, left to right, along the back of my desk. All cables drop from the top of my desk and into this channel. I have an iMac power cable, a Google Nexus charging cable, a USB hub cable, a tablet charging cable, a router power cable and a surge protector cable all contained in mine. While the iMac and the surge protector cables are by far the thickest cables contained in this channel, my wiring channel is stuffed to the max. If I had an additional cable the width of pencil, I do not think that the cover would snap closed completely. Also, if you have a wire that is any thicker than an iMac power cable, the little cutouts on the side of this channel will not be wide enough. My cable is not being pinched by this channel, but it is a really snug fit. Installation was easy. First, I cut it down to the size I needed. I used a combination of scissors and a utility knife to do so. I found that if I scored it a few times with the utility knife, it was easy enough to get it cut down. to size. After it was cut to size, I screwed the one side to the back of my desk. After that, all that was left was to route the wires into the channel and then snap the cover onto it. It works great! I am so glad that I made this purchase. My desk looks great and not a wire in sight! I would buy this again and I would recommend this product to a friend.

This product is great for hiding messes of wire running along a wall. I choose to use this for my computer cables. Obviously some of the holes were not big enough, but you can just cut out one of the tabs and now you have a nice big hole to stuff cables into. Looks great, easy to install and easy to cut with a hacksaw. Took off 1 star for the difficulty of taking off and putting on the cover. It is a huge pain in the rear, mostly for taking it off. Overall, great product and I would suggest this to anyone in need of cable management. I will most likely buy again if needed.

Works great under my desk for cable management. I cut the cover to 16 inch sections to make it easier to run wire in sections since I’m doing it on my back under my desk.

cumple con lo descrito

Tomo mucho tiempo en llegar

I have a large desk, and I bought this to run/hide cables under my desk. The installation was easy, and it was surprisingly not painful to hide all the cables in the system and get the cover snapped in. I’ve also found that if a cable is too wide for one of the holes, you can snap one of the prongs off and run the cable through there without damaging how it holds up. Would recommend this to anyone looking for a better cable management system for their desktop computer!

Funny that my second ever product review would be for something so seemingly mundane. However, I am beyond pleased with the quality, price, speed of delivery, ease of installation and everything about this boring grey plastic, but wonderfully perfect bit of cable conduit. Don't hesitate to order this if your need is similar to my need to hide dangly cables under a fancy electric sit/stand desk (see photo). Enjoy. Note: it is grey, which perfectly matches my desk hardware and it is 67" not 72" as advertised.

Best thing ever! This item could not help me any more in solving my cable management issues with my current set up. Before I was using zip ties - base mounts - etc to sort out all my wiring but found my self stuck when requiring to add or move wires. This little, or I should actually say long, beauty solved all of my issues. A couple of cable mounts (velcro ones) and a bit from strength and this should clean up all your clutter. I for one did like how this thing was incredibly long. Way longer than my desk itself. Though not an issue because with a good pair of cutters this is easy to split to the right length. Further more the installation to my desk was simple. You can chose to use adhesive but I prefer to screw this into my desk which makes it more solid. After that its just a matter of sliding on the cover (which is the most difficult part) but once you get it then you are set.