Set of 2 Dragonfire Racing 4-Point Harness 3" H-Style Harness W Sternum Clip 3"Black For 2019 + Honda Talon With Harness Override Plug(Must Have with harnesses! or computer will limit speed to 15mph)

Very nice harnesses! They where easy to install in my 2019 Honda Talon.Very comfortable while driving and makes you feel much safer than the stock belts.All you need is a 16mm,14mm,10mm socket and a flat blade screwdriver for removing the push pins.To start pull up both seat bottoms, there you will have access to the 2 16mm bolts that hold your stock belts in place. Remove those 2 16mm bolts and the 1 16mm shoulder strap bolt. Move to the drivers side rear wheel well. There you will have to remove the 4 push pins and 1 10mm bolt on the inside then the 2 push pins on the outside of the finder flair. Under the now removed panel you will find the seat belt retractor held in by 1 14mm bolt. Pull out complete belt assembly. Now use your 2 lower 16mm bolts to bolt in your lower harness straps (use blue or orange thread lock tighte on bolt threads), then feed your shoulder belts through the passthrough in the back of your seat. Follow install instructions that come with the harnesses for wrapping around the harness bar behind the seats. Reinstall all of the push pins and 10mm bolt on drivers side finder well. To install the seat belt plug delete pull up rubber cover under drivers seat where your belt fastener wire runs down, pull up on the small tab on top of the plug and unplug the belt fastener wire. Plug in included jumper wire in to the socket. Pull gently but firmly on the fastener holding the wire in place on the tunnel wall.Now move to the passenger side and follow the same instructions for removing the 2 16mm under the seat and 1 16mm shoulder strap bolt. Move to passenger side wheel well and remove the 4 push pins on the inside and the 2 on the outside of the finder flair. Pull back gently on the plastick to expose the belt retractor held in by 1 14mm bolt. Remove bolt and pull the whole belt assembly out. Reinstall all of the removed push pins. Install the harness the same way as the drivers side. Congrats you have now installed your new dragon fire seat harnesses! Pat your self on the back for doing it your self and not taking it in to the dealer to have them installed! Now get out there and tear up some trails in your talon!

These look like they are well constructed but they do not fit the Honda Talon, the bolt holes are too small for the factory bolt to fit through. They either sent me the wrong part or the guys who left reviews have them installed in an unsafe manner.

These work great! Installed them in my 2020 Honda talon. For those that say they don’t fit... all you need is a 7/16x20 bolt to replace the lower factory shoulder bolt. Very easy to install and very comfortable! Also came with the seatbelt circuit plug.

Been using for about a month in a Honda Talon. Love these harnesses. Helps me feel safer and more comfortable than a seatbelt. Override clip/wire is perfect.

Awesome Harnesses. Easy to adust and comfortable. Received very fast.

Easy to adjust