CH341A 24 25 Series EEPROM Flash BIOS USB Programmer+SOIC8 SOP8 Test Clip+SPI Flash 1.8V Adapter+SOP8 SOIC8 to DIP8 Adapter Socket Converter

Does what I need it to do.

Works

Aún no lo utilizo en algo practico pero estoy experimentando con el

The clip would never connect to my chips on any motherboards. I had to desolder the chip and use a different programmer altogether.

I'm only giving this 3 stars because it did eventually save me from a bad situation, else it would only get 1 star. Only ordered it because it was the only programmer I could get delivered in one day. The USB port was crushed, a lot of pins were bent, and the 1.8V adapter was sporadically putting out 2.8V because of a bad solder joint. This programmer also needs a "mod" to get 3.3V on the communication pins. It will only work for 5V tolerant parts as-is unless using the 1.8V adapter (if it works). I don't suggest buying this unless you need something cheap and fast like I did, but go over it with a fine toothed comb before using it.

Fast shipping Missing pieces Will update in second purchase attempt for a full kit……….

this works with modifications - the programmer is set to output 5v on data lines, it must be modified for 3.3v output. The 1.8v adaptor board didn't work for me, until I realized it had bad solder joints. After reworking the components this works as intended.

I used it for flashing an AMD GPU bios and it worked great.

I used this to recover a bricked motherboard BIOS on an older MSI laptop, and it worked great. I did the 3 volt mod for my setup to reduce the risk of failure, and after that I was able to read and reflash the chip successfully. Good tool to have if you are working on BIOS recovery and know what you are doing.

Thinking of throwing your broken motherboard? Try this cheap gamble first. If it works its going to save you lots of money! After force shutting down my computer it would not boot or post. After troubleshooting I isolated the problem to be either the mobo or the cpu. I tried replacing the cmos, unplugging and plugging again. Nothing. So before buying a new mobo and/or cpu I tried this first instead. I reflashed the mobo, and bam! Computer boots. Worth every cent!

Worked for adding trans temp on my gmt800 clusters

Works great, Used this to reprogram several Lenovo T460, T470, T480 and T490 EC Chips. The unit is simple and easy to use. The pin connectors are not as heat resilient so when you’re using your hot air station to solder the EC Chip onto the board be sure to mask it off with some tape or foil.

Work great linux and window