RV DesignerE241 White Door Holder, 3 Inch

Works good, our old one got broken.

they give you the door holder with 4 new screws, fit right into my old camper holes2004 KZ Frontier 2405

simple to replace the original one that was broken

Perfect fit for our 2005 Forest River Wildwood trailer door. Easy to install. Remove the old screws, install the new parts.No need to buy Eternabond double stick tape, you can likely reuse the OEM tape that is already there. At least, we did.CON: The quality of the 4 screws sent with the two plastic pieces is very poor. There is an obvious QC issue with the screws that are being shipped, as they have only a very, very light coat of white paint on the screw heads. So, the screw heads were more of an aluminum color than white?? Unacceptable in Florida, as they will rust quickly without the paint.Luckily, I have 3 boxes of quality RV screws (pan head and hex head) in 3 lengths, so I used those screws, as the ones sent by the mfgr are junk. I recall that the screws are 1.0" long, standard RV exterior screws.In any case, you can get a whole box of RV screws on Amazon, as I did, and replace the older rusty screws quite easily, to make your RV look new. Luckily, I had those on hand already, but shame on the mfgr for the poor quality control. So, I had to reduce my rating because of this.

Works great.

Just what it says it is

Bought a pair of these for my shed doors, to replace hook and eyes that were a pain.I kept pulling the doors shut and yanking the hook out of the frame.With these I can push and pull the doors in and out of the catch with no problem.The fit is just tight enough that it should hold them open in a moderate windThey are make of a strong plastic that looks like it will stand up well to the weather

Well it works but it only came two giant screws. So you’ll have to get some quality fasteners of your choice unless you get lucky. I don’t know.

It did the trick in no time..

These were replacements for the RV doors which work great I would recommend the manufacture offer either self taping screws or wood screws luckily I could find a drill bit small enough to drill through light gage metal other than that they work perfectly

Good 👍

Works well only negative is the screw holes don’t match the original ones on our trailer.

Fits original