GameXcel ® Vinyl protective skin compatible with Sony PS4 dualshock 4, compatible with PS4 slim PlayStation 4 controller, compatible with ps4 pro controller. Printed with super-high resolution graphics and ultra viscosity. The controller skin is easy to install and removed. The decal will not leave behind residue. The skins are Full Color, Anti-Slip" Grip-Like. Will not Scratch, Fade (UV Resistant), or Peel. Dust proof, water resistance, oil resistance. This protective vinyl games sticker compatible with ps4 controller, will protect your controller from water, juice, oil, spot, and long-term fingerprint while you play video games and simultaneously eat kinds of snacks and drinks. Installation Instruction: 1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease. 2) Peel one piece of skins from the paper liner. NOT to let the adhesive side touch anything. 3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface. 4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size. 5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time. 6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Package Contains: - One(1) 1 x Sticker compatible with Dualshock 4 Controller. - Actual Controllers not included."
O**A
Image quality isn't amazing, but as good as it can be when ...
Looks exactly as shown in picture. Image quality isn't amazing, but as good as it can be when printed on a decal. I bought this skin with the intention of just using the touchpad and button sections of it but I installed the rest of it just to see how it looked. I really love the way it looks now. This skin is textured almost like snake skin but only very slightly... and that's a good thing to me. It adds to the quality of the look and feel of the controller. MAKE SURE YOU WASH YOUR HANDS thoroughly before installing skins like these. If you have any dirt or oil on them, you're gonna have a bad time. The adhesive is very forgiving when trying to perfectly place the decals and sticks firmly even after multiple retries. No flat sticker is ever going to be able to sit/seal perfectly around contoured edges but you should know that going in. The rings that go around the analog sticks are tricky and probably wont ever stick perfectly without ripples. This is just because of how the controller is shaped, not because of a quality issue, The reviews that complain about parts not fitting correctly are wrong. I'm assuming these people just slapped the decal on without taking the time to delicately make sure that the placement was perfect. This is the 6th time I've installed a skin on a PS4 controller and this particular one is just as good, if not better than the rest.Tips when installing:-Wash your hands extremely well - I can't stress this enough-Disconnect your PS4 power supply. You WILL turn the system on with the controller a million times if you don't-Take your time and be patient. I spent 45 minutes putting a ton of thumb pressure on the rings around the joystick. Just rotate your thumb around -the outside for as long as possible to make friction heat. This helps the adhesive stick (a blowdryer or heat gun would work very well for this too).-Don't place any of the decals all the way down until you are 100% sure your placement is correct. The adhesive is quite strong and you will mess up the edges if you have to use your finger nail to pick it back off.
C**2
The look is great, but the sticker doesn't quite fit
We were really excited to receive this skin for our PS4 controller. The look is great, but the sticker doesn't quite fit. it was really difficult to get on the controller. It's almost like the stickers for the right side of the controller are smaller than the left. It doesn't fit around the joystick properly. I constantly have to flatten out the sticker because it lifts in several areas because it's too stretched out. However, if it's not stretched out that far it will over lap other parts of the sticker. Kind of a pain, but we like the look so we keep it on for now. The square button's cut out is not large enough. The button gets stuck because of the sticker.Overall, it looks really nice, but definitely needs a little bit of work on the sizing.
T**T
Beware of Sibling Thievery!
Me and my sister share a PS4 and for the most part we don't have a problem with. The only issue is that she never charges the controllers. So when I go to use them, they are almost dead. So I decided that it would be best if we had our 'assigned' controllers. How would I be able to tell which controller is mine and which was was hers? Get a controller skin.I picked the galaxy one since it was really pretty and it was not themed after a single game franchised. The only problem was when I brought it home and shown it to my sister, she put it on her controller while I was writing a few papers for my classes. My sister also had the nerve to put it on while sitting next to me. Then again, cannot really complained about the thievery when I let it happen.The only problem she had while putting it on is around the analog sticks. She likes it and my controller is charged when I go to use it. A win-win all around.
S**L
The image is great but it's a waste of money unless you plan ...
The image is great but it's a waste of money unless you plan on enjoying the picture from the package. It looks like it should fit but it doesn't. I spent and hour lining up all the stickers and got it as close as possible to perfect. Within as few days, the edges of the stickers were peeling up and giving my controller pointy edges. It also made the controller feel uncomfortable. It gives is a strange texture and makes it almost slippery. I peeled the stickers off in less than a week and threw them away.
E**R
for one thing it does not fell like leather ( it feels more like a thin rubber ...
this is over all an ok product however it has some flaws. for one thing it does not fell like leather ( it feels more like a thin rubber mat)it also doesn't cover as well as in the picture. ( although that my be due to the fact that my controller is white so the gaps are quite visible )on the bright side it does look marvellous and does add some character to my controller.
C**Y
Wouldn't stick
I tried for 2 weeks to try to get this thing to stick to my controller. Ended up throwing it away. The texture and color was really nice though
M**A
Good quality, good price
Product is a good quality, especially for the price! Texture is not completely smooth, which is nice because it helps with grip. Stickers are a little thick, which affected one of my buttons (would stick when I pressed it) but a little adjustment helped. Overall I would recommend this product.
C**R
Be careful when applying it on the controller.
It looks very nice on my controller, the only thing is that since it was cut so accurately to the form of the ps controller that you also must be just as accurate in the placement if the skin, in turn my buttons started getting a little stuck since the sticker was a little too close to it.
L**N
Get another brand
Cleaned my controller with spirits to remove any grime and oils and applied decalsThe sticker material is quite thick (too thick) and textured but has since started peeling off around the sticks and on the shoulders of the remote (i have not even used the controller since applying the decals a few days ago)Just avoid this
P**S
Five Stars
All as expected. Quick delivery.
B**K
Worthless
Dont buy
A**R
Great art work affect
Great art work affect, but the substance used to keep the skin stuck on is terrible, the skin peeled off within an hour.
A**R
do have nice designs.
The sticker doesn't stick down probably and it's made the buttons stick down at times. Although, do have nice designs.
ترست بايلوت
منذ أسبوعين
منذ يوم واحد