for 2010-2018 Dodge Ram 1500 & Dodge Ram 2500 Halogen Headlight | OE 68001485/68001484, Chrome Housing, IP67, Plug & Play, amber reflector, clear lens

Perfect fit for my 2018 Ram 1500! Super clear lenses, well made, and look just like the stock ones. Bulbs are bright. Had to adjust because my truck is lifted, but that’s easy with a socket on an extension and ratchet. YouTube has some great videos on how to adjust them… it’s really simple. Highly recommend these for the price.

These lights look fantastic on my white RAM. Fit perfectly. Unlike what I read in another comment, these do NOT come with lights. You will need to use the old ones from your current headlights or buy new ones.

Purchased these lights for a 2018 Ram 1500 and they fit perfectly. My husband and I are not car people but we do DIY pretty well when watching YouTube videos. We were able to replace the lights in about 45 minutes after we watched a few YouTube videos on how to remove the headlights. We did go to the auto parts store to get brand new lightbulbs before we put them back in to make sure everything was new and fresh. The old headlights had a haze on them and made it difficult to see too far in front of you. They were a major upgrade from what we had before. The quality on these are great and have made a world of difference in the visibility and I would definitely recommend them.

Product was well packaged and quality was great. No alignment necessary. Brightness is excellent. Removal of old assembly took more time than anticipated due to a bolt you need to access from under fender well. A 10 mm socket is your friend for both the front bolts and the one behind fender well. Before and after photos attached.

Love how they look. Came packaged nicely. Only real issue is the clip in the back on the outside of the light wouldn't clip and I didn't want to force it more than I already was. Tightened the screws and it fit well enough without much play. Not the best fit compared to the body, but good enough for me! Pics are this one and my stock one on the other side. Will update as necessary

Lights stopped working shortly after install, started taking them apart to replace bulb, but couldn't get the bulb out to save my life. Had to remove the whole light and bring to my shop to pry the bulb out of the plug. Turns out the plug melted and came apart as i removed the bulb. Now i have to spend more money to get new plugs. 0/10 would not buy again.

My truck is getting old (252,624 miles) and my eyesight at night is not what it used to be. So, after careful review and consideration, I decided to buy and install these aftermarket headlamp pods by ADCARLIGHTS along with separately purchased Sylvania H13 Ultra Life Capsules. This combination has worked out great cosmetically as well as functionally for my needs. Now the road is much brighter and clearer to me at night and allows me to see those pesky deer just waiting it jump out in front of me. These headlamp pods were not the least expensive, nor were they the most expensive lamp pods available. As an Industrial Engineer in the manufacturing of automotive headlamp industry for 30 years, I have to say for an aftermarket headlamp the design appears to be very close if not, the same as the original. This is why I decided to purchase and install this particular headlamp pod, along with the Sylvania H13 Ultra Life Capsules on my truck. When installing please note that it is extremely important not to handle your existing or new capsules or park/turn bulbs with your bare fingers. The oils from your hand will heat up and stress and eventually crack the glass allowing oxygen to enter the capsule or bulb causing pre-mature failure / reduce performance. I suggest installing the new capsules and bulbs to the existing connectors first taking care to handle by the base only or use nitrile gloves when handling. Then carefully engage the capsule / bulb connector to the molded features of the lamp pod until fully locked into position. Then you can engage the wire harness connectors to the appropriate capsule / bulb connector. To install the new headlamp pod, start by aligning the ball stud into the white ball socket which has been inserted into the sheet metal. Upon inspection, I decided to remove the new ball sockets that came with the new headlamp pods and re-use the existing ball socket already installed. Next press the ball stud into the ball socket firmly until you feel it engage, while aligning the lower threaded mounting stud and the two molds guide pins protruding from the housing of the lamp. Then start the threading of the 10mm nut onto the lower threaded mounting stud, but do not tighten as this time. Proceed to the two inboard mounting holes and insert and align the T30 Torx bolts in each hole and thread until you see the end of the bolt coming out of the fastener. Now press the headlamp inward again to seat all three points uniformly, (equally). Complete the threading of the 10mm nut until snug. DO NOT OVER TIGHTEN or you could break the housing or crack the housing boss. I would then proceed to the front lower T30 torx bolt and tighten until snug against the molded mount bracket and repeat for the upper T30 torx bolt. Again snuggly, DO NOT OVER TIGHTEN. The protective coating that has been applied to these lamps is intended to protect and slow the hazing process caused by the sun's ultraviolet rays. However, I am going to make it a practice to apply a spray on wax & dry spray wax to help repel rain and prevent water spots, plus help provide a clean surface, hoping that it will help preserve and prolong the protective coating. Please note these are only suggestions for handling and installation and I have no direct association with the manufacturer of these products or Amazon, this is simply my opinion. Hope this helps.

Fit great. Look good. Hopefully stay clear for a decent amount of time

The lights look great, but the rubber seals are disfigured and can’t be used in a restoration and won’t do what they are designed to do. I have reached out to the seller to replace these seals.

Very nice quality

Be aware of the locking tabs for holding the bulb in place. There is a reason there are extras. They break under stress quite easily. Otherwise fitment was a plus.

Excelentes materiales, muy recomendable