av splitter 8 way

Exactly as ordered. Works great.

I was using a 2 way "Y" splitter to the RCA phono plug sub out on my home stereo when running two subs (separate cabinets; separate sub amps). My subwoofers kept cutting-out, even when I tested just one with no splitter. The amp is 600 watts and if the volume was set to '2' out of '10' - even '3', same problem. Figuring the subs needed a better signal from the main amp to the sub amps, I tried this powered 4 way splitter. Not only did it solve the problem , I can lower the main volume to '1' and added a third sub and amp as shown in the photos. #1 is the MT-VIKI, 2, 3, 4 are the class D 2-1 channel mini amps I used to power each sub. In total I have 12 speaker cabinets. I recommend this unit!

Works as it should, great job

I'm surprised there aren't more of this type of product around. The lack of supply seems to keep the price up. I needed a 1 in 4 out (or more out) to distribute audio from my receiver to amplifiers throughout the house. The house was already wired with the amps and speakers and such but the sources were a hodgepodge of wires twisted together that not only unreliable connections but were squashing the signal level into the amps as well. This box resolved all that and I now have nice RCA terminals and each amp gets a full level signal. I don't notice any degradation in sound quality, though the speakers in the house aren't great so it isn't like I'm doing any critical listening through this switch. It is working great for my purposes. 5 stars.

Does what its designed for. Easy to hook up and use. Everything marked clearly. Hook up and turn on. Go.

I have to turn off and back on to get the audio to go out on both channels.

I have using this device for playing video on my local retirement community TV Channel for three years and just bought a second on for the same purpose.

My setup was to take an old consoled signal, and split it; one going to a CRT TV and one upscaling to HDMI for the new screen. You can't just split RCA, the signal weakens. You need something like this. And it does the job perfectly. All you do is plug in your initial signal, plug a power source, and using some additional RCA cables, send each output signal to its designated screen/box. This would also do well for a setup with multiple older TVs that people could watch separate from the one screen people may be playing on. Many opportunities available. Took a lot of time to find my answer and this is a very important piece to my setup.

El equipo cumple con su funcion y de forma exelente, solo se tiene que tener en cuenta que hay que adquirir un cable rca de buena calidad para que no haya ninguna distorcion de sonido, al principio use un par de cables que tenia por ahi guardados en una bocina y se escuchaba un poco de estatica en esa bocina, cambie los cables por otros de dudosa calidad y tenia el mismo problema, hasta que compre unos de buena calidad y se soluciono el problema, tengo 2 meses usando el equipo y cumple perfectamente

Muy bueno para interconectar muchos equipos con una sola señal de que inicio sin perdidas o ruidos incómodos no requiere ninguna operación especial una ves instalado de buena calidad altamente recomendable en mi caso tengo tanto de 4 como de 8 salidas y más de uno de cada uno

Después de tanto tiempo sin usar mi sonido, pude conectar 3 amplificadores y un home theater al vez y un Bluetooth a mi equipo de sonido ya viejo. Excelente splinter solo lo probé con audio y me encantó, el sonido no se distorsiona buen producto.

Funcional. Cumple su funcion

Hasta ahora ha funcionado muy bien para cuadruplicar la fuente de sonido a 4 amplificadores. Lo hace de manera muy limpia, sin ruidos ni distorsiones. Lo mantengo encendido y no se calienta.