eXtremeRate Clear Atomic Purple DIY Replacement Shell for Nintendo Switch Lite, NSL Handheld Controller Housing w/Screen Protector, Custom Case Cover for Nintendo Switch Lite

The shell itself is high quality, looks good and feels good. The screwdrivers which came with it weren’t amazing, but at least they added them, and the screen protector is good, but I did it wrong which is on my part as I got dust under it… What I really wanna highlight is the absolutely brilliant instructional video. So simple, to the point and no waffle, there could have been no text and I’d still understand it. Great product. 10/10!

I opted for Atomic Purple and it looks great once installed, I love the retro vibe. My switch was teal coloured and I opted not to use the screen protector that comes with the shell, out of everything I struggled the most with the protector so just ditched it in the end! The teal rim of my screen actually looks decent with the purple shell, grey would have worked better but I don’t regret not bothering with the protector. Obviously this takes some time and effort to install. I spent roughly 4 hours doing this but I actually enjoyed the challenge. I only had an issue with the ZR and ZL buttons post installation but it was because i’d put the rubber button press inside the switch the wrong way round, once I corrected that it worked like a charm. There are plenty of tutorials online on how to do this, as long as you find a good one you’ll probably manage just fine. I used the tutorial by Erica Griffin on youtube, as she narrates what she’s doing I found this to be better than the tutorial by extremeRate themselves.

This is a brilliant product for customising, changing or even replacing your Switch Lites case. It’s sturdy, well made and very pleasant to look at once completed. Something I’m sure all of you want in this style of product. However I do have two issues with this product. Neither relating to the case itself mind you. 1st - The screwdrivers supplied with the product broke on me and made on of my Tri Wing screws damaged. Meaning my original switch case is simply unusable and I’m now left with the case I ordered. I’m not sure if this is a common issue or if I simply got unlucky but the Tri Wing screwdriver supplied with my case broke immediately rendering it pointless. So I ordered some more to change my case around. 2nd - Note that this product is designed to be used by experienced consumers. And if you are new to customising I strongly recommend you watch a video before, during and after purchasing. As taking any Switch apart is a daunting task for a new person. But aside from that. This product is amazing! Strongly recommend

aside from those two faults the shell is made very well and fits basically perfectly, even comes with a screen protector, replacement screws and colourful buttons.

Was very easy to do, looks excellent and was only £20

Ordered the clear pink for my daughter, after putting most of it together noticed on the rear housing white marks which show through. There are some photos in other reviews of the same thing. The plastic is very thin and of poor quality. I wouldn't say it would survive a drop without splitting. Luckily Amazon refunded me I'll just go and buy a genuine pink housing.

Came with everything you need to swap case over tool wise, easy handling, fit perfect, Worth the money, came with protection screen, looks great all round

Comes with all tools(be careful when removing the backplate screws on the stock switch tho, they strip far too easily) Only issue I had was the screen border is just a screen protector, that might not be a problem now, but when it inevitably cracks then replacements might be a slight issue. Comes with colored replacement abxy buttons. If you are opening the switch up this far, you might as well get a replacement hall effect joysticks set and fix the drifting problem forever.(and some sneaky modchip stuff too^⁠_⁠^)

Montage très rapide et simple pour un non débutant le résultat est super je recommande

I needed to do a full teardown of my Switch Lite to replace a broken LCD so when I saw a Glow in the Dark shell I knew what I had to do! The quality of the kit is pretty good. The plastic is a bit softer than the original shell but it doesn’t feel cheap. Other than a very small gap near the charge port, everything fit very well. My only concern would be a few of the screws didn’t bite very well in the post and were spinning at the end. The kit had a bunch of extras, I have my own tools but it was nice to get the correct screwdrivers and some extra hardware (I’m glad it had an extra spring for the shoulder button!). I didn’t use their guide, I used the ifixit screen replacement guide instead. It wasn’t an easy job, lots of delicate ribbon cables etc, maybe an 8/10. I wouldn’t recommend this project for someone just getting started. You definitely want to have some experience working on complex, multi part electronics. You also need thermal paste and screen adhesive and I recommend having a good electronics repair tool kit complete with tweezers, spudger, etc. Good kit all around!

Comme souvent avec extreme rate, la qualité du plastique est au rendez vous. Malheureusement, encore une fois, comme souvent chez extreme rate il faut un peut bidouiller ce qui peut être embêtant pour certains. Dans mon cas, j'ai dû poncer un peu le bouton R car la coque ne la laissait pas remonter du bouton. En dehors de ça c'est franchement une très bonne qualité pour des coques non officielles, on ne peut trop guère s'attendre à mieux. L'inclusion d'un protège écran est grandement appréciée.

La carcasa es de buena calidad. Al momento de terminar el armado te darás cuenta. Queda muy firme y parece que así salió a la venta de tienda. Incluye un pack de tornillos suficientes que te servirán por si te faltan algunos originales. Está excelente para reemplazar las carcasas por uso o estética. Recomendada 100%. Considera que tiene los botones y,a,x y b además de los botones de encendido y volumen más y menos. Tiene la tapa de cartucho y la tarjeta de memoria pero necesitarás de la cubierta trasera original unas gomistas que tienen con su tornillo. Lo malo es que no tiene los botones L, ZL, R, ZR, Home, mas, menos, captura ni la cruceta. Si tu caso es por cambio de esos botones o por que en la original se dañaron o no los tienes, compra el pack aparte mejor. Y no incluye pinzas (que si necesitarás para las piezas pequeñas y los flexos.) En el caso de la pantalla incluye un protector que tapa el color de la original. Por ejemplo la mía era la verde turquesa pero en las fotos no se nota el marco verde, ya que el protector de pantalla tiene un marco que corresponde al color comprado. (En caso de que lo necesites cambiar o poner) Fuera de los botones esta carcasa traslúcida es increíble. Y si tuviste el game boy atomic purple te encantará la versión para el switch lite.

Leute, ganz ehrlich: Ich liebe meine Switch Lite, aber das Standard-Design war mir irgendwann einfach zu öde. Also hab ich mich an das blaue Full Case gewagt. Und was soll ich sagen? Die Farbe ist im echten Leben noch viel schöner als auf den Fotos – richtig tief und satt. Da geht mir das Herz auf! ​Meine Erfahrung beim Basteln: ​Die Verarbeitung ist wirklich erste Sahne. Es fühlt sich wertig an, nicht nach diesem typischen Billig-Nachbau-Schrott. ​Der Schrauben-Moment: Es liegen zwar neue Schrauben dabei, aber kennt ihr das? Man vertraut den alten Kameraden dann doch mehr. Ich hab also die Originalschrauben behalten – hat super funktioniert. ​Ohne Hilfe geht’s nicht: Ich sag’s euch, wie es ist: Ohne die Anleitung von iFixIt hätte ich wahrscheinlich zwischendurch weinend in der Ecke gesessen. Dank der bebilderten Hilfe war ich aber nach 2 Stunden durch. ​⚠️ Was ich anders machen würde: ​Hätte mir das mal vorher jemand gesagt: Bestellt euch unbedingt neue Wärmeleitpaste dazu! Wenn die Kiste schon mal offen vor einem liegt, ist das ein Abwasch. Und mein persönlicher Geheimtipp: Tauscht direkt die Joysticks mit aus. Wenn man schon mal im „OP-Saal“ ist, lohnt sich das Upgrade für das Spielgefühl enorm. ​Mein ehrliches Resümee ​Man braucht schon ein bisschen Fingerspitzengefühl und darf keine Angst davor haben, Elektronik nackt zu sehen. Wer aber handwerklich nicht ganz zwei linke Hände hat, kriegt das hin.