Stanbroil LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 18-inch

Quality! I make wine barrel firepits often and this burner works perfectly and customers haven’t complained since I started in 2020.

Great quality, easy to set up and plenty sizes to choose from

Have to say, they work great. Make sure to dial back from fully open or they do theme to burn some propane. Built Fire bowls with them and VERY HAPPY. Parts are holding up great to beach front salty atmosphere.

I converted my wood fire pit into a propane gas fire pit with this. The bottom of my pit was 24” diameter so I used an 18”. The instructions are garbage. They have 3 pages of warnings and 1 paragraph of how to assemble it. Basically the assembly instructions say connect the parts and check for leaks. They are also wrong telling you to face the holes down which is bad with propane due to pooling since it is heavier than air. I know it’s always a big debate but I use logic. If it’s pushed up on top it can burn, warm the humans, and look nice, little to no boom chance. Pushed down it can pool, warm the pit, and look weird, possibly go boom. Water and such in the tiny holes isn’t going to be a common thing. If you are doing what I did, drill 5 extra holes in the bottom of the pit with one larger one in the center. The 4 “extra” holes is to vent any pooling. My pit already had ventilation in the pan, but extra cautious on my part. For the one in the center, use a step bit to make it big enough for the extension of the air mixer. Take the taped joints apart, re-tape and tighten them as you assemble(they will leak if you don’t so don’t trust that they are taped and tightened when you get it) and only re-tape the ones already taped. I placed the air mixer fitting (brass with holes in it) underneath the bottom of the pit along with the flex line, key valve and regulator hose. In the bowl I connected the extension and the burner with holes up. Test for leaks after assembly and before the rock. Under the burner I placed lava rock to fill under and around up to the ring. On top of the lava rock and ring itself I used blue fire glass. How you top the ring depends on your preference obviously, but don’t make it too deep of a layer over the burner. Just enough to kind of hide the burner. Then I placed the fake logs on top. I then used a 12’ extension hose that I connected to the regulator hose and a larger propane tank. You have to use a regulator for propane. Think tank, extension hose, regulator hose, key valve. Turn the tank on then only open the key valve a little and light. Adjust from there. Hope this really long review helps someone who is lost like I was.

Converted our natural fire pit to a gas fire pit and we love it great flame, good heat. Setting is on low in this photo.

quality built. I would only want an extra lock nuts at the bottom to hold it in place

I usually never leave reviews from products on Amazon simply because I never hssve them long enough before I've returned them because something was off about it. Not in this case, although I do wish I went bigger and got a bigger ring to feel the heat more and at least a wind shield for the flames I don't have really anything bad to say, yet lol. It's only been a week or so... however I built this table from scratch drilled my holes and plopped the ring right in no stress in installing it or complaints from me, yet... looks nice, feels nice and is peaceful at night. Attached is a picture of a fish tank fire pit table I made.

Arrived promptly, in good shape. Easy to install and fire looks beautiful, but the key broke the first time I turned it.