Lian LiGB 001 Graphic cardnhalterung Black

I was looking for a solution to remedy my GPU’s sag but everything on the market is just those hideous brackets/supports or ugly stands. Nothing low profile, no innovation, all the same garbage that looks terrible.However, when I found this, I decided to keep my eye on it for a while (when I first discovered this Lian Li sag support, it was not available on Amazon and only from Microcenter). The other day I found it available on here and bit the bullet.Installation was quite easy, but it did not fit where they tell you to install it (near the PCIE slot) due to my motherboard’s heatsinks. However, what they fail to really advertise/mention is that you can just install it over your sata ports on the rightmost side of your motherboard as well, which is ironically better as it provides more support to the end of the card where it’s actually sagging.Then, I ran into the problem of the support interfering with my GPU’s fan, as the L shaped bracket that screws in was slightly too long and passed my GPU’s shroud and went into the fans. Luckily, Lian Li provides two extra rubber pads, so I took one, cut it in half, and placed it on the support, but farther back so it only pushed on the GPU shroud and didnt reach into the fans. Works flawlessly now.This is the best sag solution on the market right now, low profile, works well, and is the only thing on the market that is remotely innovative in this space. Only con is that $20 is a little pricey for something so simple, but nonetheless amazing product. 5/5 would recommend, if any of my friends ever need a sag solution, this is what I’m getting them

Really cool idea to utilize the motherboard standoffs to provide support for the GPU. There are a couple things to keep in mind, however:1. This will not be compatible with all motherboards. If the motherboard you're using has a large heatsink for the chipset, this will not fit. If you have any connectors between the two standoffs (USB headers, fan headers, SATA connectors, etc.) this bracket might interfere with these.2. This should be compatible with MOST GPUs, but might require some slight modding. The rubber pad that holds the GPU in place was actually touching one of my fans when it spun. My computer made a loud noise when I first turned it on after installation, I had to cut the rubber pad in half to solve this issue. Luckily Lian Li provides extra rubber pads and screws.3. Lastly, this works best with motherboards that have their GPU slot NOT at the very top. My motherboard (MSI B350 tomahawk) has a PCIE x1 slot ABOVE the PCIE x16 slot where you plug the GPU into. This bracket works best on motherboards with a similar setup, if your GPU is at the very top then clearance might be a little tight and you can't put a bracket above the GPU, only below it. I have one bracket above the GPU and one below, this was the main reason I wanted this particular bracket. So I could have support from above and below.Overall, great job Lian Li, this is a pretty innovative product if you ask me. Now I can travel with my PC in the car without worrying about the GPU snapping off when I go over bumps. Just make sure your PC is compatible before buying.

Works great! There another review stating it does nothing but they have it installed the wrong side of their motherboard! It goes near the front of the case. My 7800xt only has an inch or so overhang past the support but I jiggled the thing around and it's super solid!! Works great as long as it's used right!

It looks great, is easy to install, easy to adjust, and I have had zero issues. It is overpriced for some small pieces of metal, but it was exactly what I wanted and it delivered. I hope other brands take note to create price competition.

Does not fit a MSI Tomahawk MAG mobo, the heat shields will prevent it from securing to the mobo. It is very well made otherwise.

I feel like this should’ve been included in my o11d mini case but here we are paying over $20 for this. This should definitely be cheaper priced.Now it does it’s job. The whole point is to prevent damage to the connector and motherboard so it’s taking some weight off the connector. Currently using on b650e Taichi lite and 4080 supper fe in o11d mini

This is by far the best CPU support bracket. I've been using versions of this since 2019, and will continue to do so. I use very heavy watercooling blocks (like 6lbs+, no joke), and so need extra support for the GPU.I generally try to mount waterblocks vertically, but it's not always possible with external radiators and clean tubing runs. I started using this and immediately noticed my GPU was perfectly straight where I mounted it, and that the stress was transferring to the stand-offs in the case. I've had an MSI 4090 with active backplate mounted for over a year horizontally without issue.The directions indicate to mount the bracket on the middle case stand-offs. I found that depending on the motherboard, I had to dremel the bracket to avoid contact with a chipset\vrm heatsink. It was easier to mount on the end stand-offs, and works just as well on longer GPUs.

I genuinely don't know why these types of support brackets aren't more common/popular. They make a great support bracket. They can be installed in the center or far right motherboard standoffs to support a wide range of GPUs, they are low profile and blend in, keeping a clean look in your build, and you can use it in a dual-GPU setup.The only cases these don't work in is mATX cases or ITX cases, but in 90% of use cases they offer better support and are more universal than the conventional stand support that rises up from the bottom of a case.