Question 1

Can i record noise by connecting it with a philips microphone directly? i have to tune the gain to its maximum so that i can hear the sound recorded

Accepted Answer

Hi,

You can connect any microphone to this unit as long as it has an XLR connector. You cannot connect a microphone via a jack or USB cable.

This device does not connect to a computer directly - you will need to connect it to an audio interface which accepts optical ADAT connections or analogue line in connections. If you are looking for a device to record your microphone into the computer with directly, please take a look at the Scarlett 18i20 Audio Interface instead.

Please get in touch with our support team by emailing amazonsupport@focusrite.com

Best regards,

Laurence Clarke // Focusrite Technical Support

Question 2

Can I use this to play four separate channels from my Macbook?

Accepted Answer

No, you can't, this is not a recording interface by itself, it does not have any usb/thunderbold or any other way to comunicate with your pc/mac.
You need to have a recording interface that has ADAT in and out so you can hook the octopre to your master interface and then your computer will detect the octopre and you can do what ever you want, and yes you can play separetes channels, from your mac after doing the propper conection to your main interface

Question 3

Can the Octopre be chained to the Octopre Dynamic for a combined 16 record able channels?

Accepted Answer

Braden - my suggestion would be to go to the Focusrite website support page and open a ticket with their tech support using the pre-sales inquiry category.  I did this when trying to make a selection on ADAT interfaces and they were extremely helpful answering my many questions.  I am making the assumption here you are using this for recording and not live output.  My opinion is that you would not be able to chain them together.  The OctoPre does not have an ADAT input so no way to get the Oct0Pre Dynamic signal into the OctoPre.  While the Dynamic does have ADAT in (so you could possibly have the OctoPre feeding the Dynamic), I don't believe you can get more than 8 channels out from the Dynamic to your interface.  I did notice that Focusrite has some interfaces in the Clarett and Red lineups that have two ADAT inputs and support an additional 16 channels. That might be a possibility for you (one interface and two OctoPre/OctoPre Dynamic).   I would caution you that if you are looking at the OctoPre MKII that it is based off the Saffire line-up and uses a different architecture for the pre-amp design and sounds different than the Scarlett OctoPre/OctoPre Dynamic.  Again, my recommendation would be to go straight to the experts at Focusrite.

Question 4

Can I use this with my Scarlett 2i2 interface? I’m trying to record my drums with this and need extra channels

Accepted Answer

Hello,

Unfortunately, the Scarlett OctoPre is not compatible with the Scarlett 2i2. The Scarlett OctoPre will only work with interface's that have ADAT expansion.

Best Regards,

Anthony
Focusrite

Item Weight	3.71 Kilograms
Product Dimensions	48.2 x 28.6 x 4.45 cm; 3.71 Kilograms
Item model number	AMS-SCARLETT-OCTOPRE
Color Name	Red
Connector Type	Optical Toslink, XLR
Operating System	Windows
Voltage	100

معلومات عنا

خدمات العملاء

دعم العملاء

الوصول الإقليمي

القانونية والسياسات

اجتماعي

احصل على التطبيق

FocusriteScarlett OctoPre

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة