OVERTURE Matte PLA Filament 1.75mm, 1kg Matte Green

I absolutely LOVE overtures matte pla line up. It is by far my favorite go to choice when buying pla. I have 2 Bambu labs X1C’s, an H2D and a H2C, and it runs smoothly through all 4 printers and gives great color and quality out of the box. I first started with a Ender 3, and if you didn’t know, adhesion has and will continue to be the biggest hurdle of it. But once I started using Overture Matte, I never had to worry about it after. Drying seems to only take a few hours, only if I even feel the need to dry it. I typically use PETG, as it’s becoming more available for around the same price, but if I need a good pla to test part fitment, making visible lightweight things inside my houses, need a recommendation to give when someone first gets a printer; I always go with Overture. Ive never been a fan of glossy prints, small defects are noticeable with them. But when using Matte colors, they’re not overly reflective and makes color stand out and POP way more efficiently. Even with Bambu’s filament presets (which typically need to be tweaked slightly) every matte spool I’ve gone through runs perfect with no changing. For the price, the quality and quantity, the easy of flow, how good the colors come out looking; I will continue to get exclusively overture matte as my PLA go to. I have for years (around 5-6 years now) used this exact filament while trying multiple different brands, and none have come close to working as well as this has. 10/10

I’m really happy with this filament. The color came out great, the prints looked clean, and it handled the details of my project very well. I used it to print a set of turtle-inspired hand display pieces, and the finished results turned out awesome. The filament printed smoothly without clogging, had great bed adhesion, and produced vibrant colors that really made the finished pieces stand out. I also liked how consistent the material felt throughout the print. The surface finish looked nice, the layers came out clean, and the final prints had a solid, quality feel to them. Based on my experience, I would definitely buy this filament again for future projects.

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping. Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed. For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers. I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong. If I run into any issues I'll update accordingly. Update 7 Days Later So i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm. Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

My first time using this brand and very happy with Overture PLA. Prints nice, no bubbling from moisture, and no inconsistencies with the print. Spool was perfect rolled and no tangling during use. Pla has no odor and compatible with my Snapmaker U1. I did put the new spool in a dryer box for a few hours since the humidity level of the spool was over 25% out of the bag. Could be my moisture meter, but I'm not complaining. Also I like the label on the spool with the indicator for the weight and length left. Comes in handy when printing something that takes all days and determine if you have enough to finish the print or not. Good value and almost the perfect color for the kids dumpling box thingy.

Obsessed with this color! It’s so fun and funky and I feel like makes everything so unique and cute! Can’t wait to buy more colors + make additional stuff!

I needed a filament that best matched Haze Grey and that wasn't going to cost me a couple hundred dollars for a color calibrated filament. US Navy Ships are painted in 2 colors on the exterior, Haze Grey and Deck Grey. The grey color you see when you look a Carrier or a Destroyer is Haze Grey, Deck grey is a darker grey and is usually painted on the floor of traversed spaces aka where a sailor may step on. I needed something that was close after a lot of research I bought 3 grey PLA's and of the 3, this was the closet in color. The ship I printed was 1/700th scale using a .2mm Nozzle and a .08 nozzle layer height. I used an Ender 3 Pro and I printed on a piece of G10 heated up to 60 degrees. I had lot a bunch of trouble getting this to stick at first. I refuse to use glue sticks, hair sprays, etc to make them stick and I almost caved here. I think the problems with getting this to stick deal with the smaller surface area of a .2mm nozzle. I found if I used a brim of at least 8mm in diameter then I had a much better chance of getting it to stick. if you look at the one picture you can see my thumb, to get an idea of how small some of the parts were. I had some stringing on some of the smaller parts but because of how long these take to print and the fact I knew I was going to do some post processing I wasn't too worried. I also tried some larger prints using a .6mm nozzle and these had no issues at all. I printed some PCB din rail holders since I already had this filament queued up and the filament had no issues with sticking or stringing. The matte color does a really good job of hiding the layer lines you can still see them in the right light or up close. This is the first time I've ever tried this brand. I generally stick to the same 1-2 brands that I know and trust. I have mixed feeling amount wether I would buy more from this same company. on the one hand I had a lot of trouble when printing really small but on the other with larger nozzles I've had no problems. this is problem due to a lack of experience with printing really small, fine detail models.

I've used Overture filament before and it did the job but for me fell a little short of Hatchbox which is typically my "gold standard". This was my first time using their matte filament (black) and I have to say I'm pleasantly surprised. The top layer is perhaps the best top layer I've ever seen come out of my printer... There are basically no layer lines, it is almost like glass (well, matte glass) without any ironing. It does seem to be a little picky about temp- it wasn't laying down smooth at 200c on my Ender 3 S1 Pro, but 210 seems to have done the trick. At 200 it was actually a little odd, some layers were good and others were not. One last note- this isn't 100% matte- if it were a wall paint I'd probably call it a satin or eggshell. Still, it has the least gloss of anything I've used, with most PLA being what I'd consider semi-gloss and some PETG being relatively high gloss.

The color is good, prints fine, however, the filament was so sloppily wound on the spool it became a real headache. I would struggle with the decision to buy again. I am hoping this was a bad role because it is a nice filament.

Manufacturer included some Easter eggs inside - an attachable print surface, and little measuring/removing tool for prints. PLA looks nicely manufactured. Quality goods!

Viene mal enrollado, durante la impresion se sale del carrete y da problemas de extrusion. No creo volver a comprar esta marca. Pesima adhesion

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging

Prints Like an absolute dream, simply outstanding. No stringing best I’ve tried and I’ve tried quiet a few tpu filaments, neon orange is probably one of the best colours to use if you regularly lose your fpv quadcopters.

Mai più, soprattutto chi ha un AMS/ACE Pro! Ho preso due bobine di due colori diversi...stesso problema: si inceppano perché arrotolato male e ogni 5 min devi spigliare il tutto. Bello da vedere ma per la stampa virate su altro!