ANYCUBIC Water Washable 3D Printer Resin 2.0 with Easy Post-Processing, High Precision and High Resilience, Low Odor and Anti-Yellowing 3D Resin for LCD/DLP Printers(Grey,1kg)

I am a seller on another platform. I've primarily used the Egeloo washable resin. After finding this resin cheaper and good product reviews I decided to give it a go. And I am impressed, I am into my third 1Ltr bottle and will stick with it.. .The Image quality is 30% better and is 100% water washable. The Egeloo resin left a greasy residue and I had to rinse after a water wash with IPA. I have not used IPA since using the AnyCubic Resin. The exposure times for me are less, which means a print takes less time and power time, as a whole this is saving me money. I use a Halot One and a LD 002H with Bottom Exposure Time of 12s and then 2s anything more I find the some of the print breaks away with the supports. Rule of thumb here is to reduce your curing time on this resin. Once dialled in it is more forgiving in printing in regards to the supports you use on the model and as a print in whole (marks left from supports on the model). My review is for the Grey Resin. I also the have clear resin and have only printed a few things with it. Although I got the same results I am yet to reduce the yellowing. I am going to try the curing based on the reviews of exposure to UV light after printing in water. Currently A+

EXCELLENT Resin! Fabulous detail... What's to say? It's the best!!!

This is a solid resin if you want something that is a bit less faff than standard resin. The water-washable side of it makes post-processing much easier, especially if you do not want to keep loads of IPA around just for cleaning prints. Detail is good and it seems to handle small features well, so it is suitable for miniatures, models, parts and general resin printing. It is still resin, so you obviously need to treat it properly, wear gloves, avoid skin contact and dispose of the dirty wash water safely. Water-washable does not mean it can just go down the sink. Print quality is decent for the price and the easier clean-up is the main selling point. I would still make sure prints are properly washed and cured, as under-cured resin can still feel a bit tacky. Overall, a good everyday resin for hobby printing. Easier post-processing, nice detail, and good value as long as you handle and dispose of it properly.

Good resin, prints well, I find with water washable resins that it is very difficult to properly clean the inside of hollow prints. If you are using this I would recommend printing sold prints or they will smell forever. If you want to print hollow prints without issue, standard resins are the way to go. Isopropyl alcohol cleans the insides much more reliably. The resin fumes are already bad enough so adding alcohol doesn’t risk more. It’s not too thick and it is strong enough for printing large and detailed prints. It was easy to use too. As with any resin though it is SUPER dangerous and smells very bad, none of them smell okay, they all stink and are all bad for you. If you can smell it, it is hurting you. Try to avoid printing in your house if you can, use a garage or shed or something.If you have to print in your house then take the safety extremely seriously, (take the safety seriously in any place you print come to think of it) this stuff will make you extremely ill in the long run, or even kill you if you don’t take the safety seriously. Use gloves, use safety specs and most importantly use proper extraction and also use a respirator! You shouldn’t have to risk your life for a fun hobby!

As allways very good quality and easy to use!, No real smell to talk of, grips the build plate very well. I use a 50 sec first layer to be sure. Good value. its grey.

My go to resin great quality.

I am 100% new to Resin Printing so I started off with this Water Washable as it looks and sounds much easier, and I can already tell that it is, I bought a little £15 UV lamp and an old washing-up bowl to rinse/scrub then cure my prints, cheap option until I can afford a wash and cure station. The above photos are the results within 24-48hr of buying my first machine, the detail is superb, washing is pretty simple, sometimes a tooth-brush helps as long as there's no thin tiny bits, curing time is super fast, only a couple of minutes is required as long as you rotate the parts. Being cocky, I didn't feel I needed to wear gloves, cocky = knobhead, as you should wear gloves with it, even after washing the resin caused irritation until curing. I chose Grey as it seems to show higher detail and looks better to paint, so far the water washable resins are limited in colours so I hope more come out soon as a lot of the models would look great without painting if they were a better colour. I've demolished a whole Litre within 3 days but I have printed a huge amount of models, some I could have printed hollow would have saved me in resin and make it go further.

I like this resin as it produces good quality models and is much lower odour than a lot of the ones you have to clean with IPA. Good clean white with no yellowing and easier to deal with the model when you can just rinse off any excess. Cures well.

Me ha sorprendido lo bien que imprime esta resina. El verde translúcido queda limpio y muy bonito, sin ese efecto escarchado típico de otras. Los detalles salen nítidos y no he tenido que tocar prácticamente los ajustes. Lo mejor es que se limpia con agua, así que el posprocesado es rápido y sin olores fuertes. ✨ Conclusión: una resina cómoda, precisa y con un acabado translúcido muy chulo. Repetiré.

Marche très bien avec mon imprimante Anycubic. Très peu d'échecs d'impression. Se nettoie bien à l'eau et je ne pense pas revenir aux résines standard. Bon rapport qualité prix.

Ich nutze das Anycubic Water Washable Resin 2.0 (Lila) auf einem Elegoo Saturn 4 Ultra mit den Standard-Profileinstellungen – und bin ehrlich beeindruckt. Die Detailtreue ist hervorragend: feine Strukturen, scharfe Kanten und sehr saubere Oberflächen, selbst bei kleinen Bauteilen und filigranen Details (siehe die kleinen Pfeile). Die beigefügten Bilder zeigen die Drucke direkt nach dem Entfernen der Supports – ohne Nacharbeit oder besondere Feinjustierung der Parameter. Wichtig zur Einordnung: Die sichtbaren „Kratzer“ bzw. Gebrauchsspuren am Hammer sind Teil des STL-Modells (gewollte Kampfspuren) und kein Druck- oder Materialfehler. Genau diese Details werden vom Resin sehr sauber und präzise wiedergegeben. Zum Geruch: Ja – das Resin riecht deutlich, wie es für Photopolymerharze absolut typisch ist. Wer Resin druckt, sollte ohnehin für eine gute Belüftung oder einen Luftreiniger sorgen. Mit entsprechender Absaugung ist das problemlos handhabbar und aus meiner Sicht kein echter Nachteil, sondern schlicht Teil der Technik. Das Resin lässt sich unkompliziert verarbeiten, mit Wasser reinigen und zeigt ein gutmütiges Druckverhalten. Supports lösen sich sauber, ohne feine Details zu beschädigen. Fazit: Sehr hohe Druckqualität, exzellente Detailwiedergabe und zuverlässige Ergebnisse – für mich ein klares Fünf-Sterne-Resin, sofern man weiß, worauf man sich beim Resin-Druck generell einlässt.

Utilizzo questo tipo di resina da ormai due anni e devo dire che sono molto soddisfatto, ultimamente hanno messo anche in rete le regolazioni dei tempi ottimali che, se applicate, fanno uscire le stampe in maniera impeccabile. Dopo la stampa consiglio di lavarle anche con un po’ di sapone, per sgrassarle completamente prima di procedere alla cura UV, in modo che nella fase di colorazione non rimanga il fastidioso velo oleoso che non permette al colore di fissarsi.

ich habe die Resin bei mir seit ein paar Tage und kann damit nicht mehr zufrieden sein. Als die Bio Resin von Anycubic präsentiert wurde, war ich ein bisschen skeptisch. Basiert auf Soja Bohnen und hat die gleiche Eigenschaften wie das normales Kunstharz? Jetzt bin ich aber total begeistert damit. Heute Tage ist die Nachhaltigkeit sehr wichtig, und mit diesem Resin habe ich ein besseres Umweltbewusstsein, weil keinen Schaden um die Welt tue. Der Geruch ist wesentlich leichter und der Raum stinkt nicht so hart nach Chemikalien. Die Druckqualität ist wie gehabt und erwartet, perfekt. Sehr fein bis zum kleinstem Detail. Die Farbe ist sehr schön und ändert sich nicht nach der Aushärtung mit der UV Lampe. Von der Konsistenz, ist diese Resin sehr ähnlich wie das normales, aber fühlt sich ein bisschen elastischer und nicht so zerbrechlich. Wenn man die Modelle anfasst, fühlt sich ein bisschen wie „gummiert“, und das für mich ist sehr toll. Für alle diese Gründe, würde ich diese Resin empfehlen und selber weiter kaufen!☑