🚚 Secure Your Adventure with Confidence!
The Tigeracing Tie Down Anchors are robust, all-metal retractable D rings designed for heavy-duty use, compatible with select Ford Super Duty trucks. With a remarkable 3000 lbs capacity and a rattle-free design, these anchors ensure your cargo is secure and protected from the elements.
S**E
Good quality, but…..
They work as advertised but the anchor could be a bit longer so it would extend up further.Other than that, good product.
S**E
Don’t quite fit
Like many have said these do NOT fit the Ram (mine is a 2018 2500) that has a plastic bed liner without modification. They are just a little too wide. Sounds like most people chose to cut out the plastic liner. I went the other route - got out my dremel and ground off the sides of the anchor. Likely took a little longer, might have a slight impact with the strength of the anchor too - but my thought was do I want to “modify” a $50k truck or a $24 part? I chose the part. Once in they’ve been working great. If they’d just make them 1/8 of an inch narrower they’d be perfect.
H**E
Simple and solid. Easy install. No cutting.
These are a must. They can be used for many things obviously but I had an issue tying my kayaks down near the tailgate and I thought something like this would be perfect. I was right. I put them on a 2018 ram sport and they fit very snug with a very simple install completed with them being very secure to the truck. The hooks go up and down with ease. Check out my video very cool!
W**E
Perfection! A MUST for ANY truck.
These should have come already installed from FORD. I have a 2001 F350 and they installed in less than 2 minutes with just a Phillips screwdriver. They pop up, they pop down and they don't rattle when you drive. Best accessory that I have purchased for my truck.
D**.
Cake install....withOUT a plastic bed-liner
The plastic bed liner cutting was a challenge (one tough monkey), but after getting it opened up, the anchor dropped right in, and secured up. If you don't have a liner, it would only take a minute to install both. I do like the spring-loaded bar, that drops down when not in use. It's really in there, and also helps secure the plastic liner to the bed. I definitely recommend these. You just loosen (or in the case of a liner, remove) the 2 top Phillips screws, angle the base under the lip of the truck bed, and straighten it up, lift the bar, and tighten the screws, and that's it.
ترست بايلوت
منذ شهر
منذ شهر
