Oil Sampling Pump - Made in USA - with Vacuum Release Valve - Compatible with 5/16-inch Hose, 1/4-inch Hose (Most commonly Used) and 3/16-inch Hose

Works. Simplified and made oil sampling way easier. Fits the bottles my company uses for sampling. I already had tubing for it.

Good packaging, quality product, as described will accept multiple size hose. Works very well. Makes taking samples extremely easy and clean. So if you are tracking the wear on your engine or monitor the transmission or coolant this makes it so much easier to obtain samples. The release button allows you to exactly control the sample size and stop the flow when you want. Very sturdy build quality. Think it will last for many years.

I needed a good quality pump for taking fluid samples from the generators I work on. Works extremely well and the vacuum release button is a definite plus.

Works good, thank you

I bought this so I could keep tabs on my new Truck and its engine, since there's a huge recall on earlier model years. First, this works amazing! I was able to put a thin tube down the dipstick tube and pull oil into the bottle! Be sure you order wide mouth bottles with a 38-400 cap. Many bottles sold here are wide mouth, but do not have that thread on them. Also, new GM oil dipstick tubes are incredibly small. A 1/4 OD tube will not go down to the oil. You need a smaller diameter one. Search for "4mm OD Bowden Tube" you can buy a very short length for just a couple dollars.

Solid construction and good price.

This is the first sampling pump I've purchased. I put it to use almost immediately, sampling oil on a Ram 3500 with the 6.7L Cummins engine. The 1/4 inch tube attached to the pump perfectly with no issues. I had to change to a 3/16 flexible fuel line tubing because of the Cummins dip stick tube. The 3/16 line worked, but didn't tighten down quite as good. I thought the threads were going to strip on the yellow plastic head because of how much you had to tighten it so the O-ring would fit snug on the 3/16" tubing. At one point, I noticed the thumb screw looked like it was setting at an angle - like it was cross threading or trying to jump threads. I loosened it then tightened it back down a little less tight than before. The vacuum worked excellent however, and I was able to get a sample after some other difficulty with the 3/16 tubing that was not related to this pump.

The tube fitting accommodates a variety of sizes, and the pump pulls oil up very quickly.

Works good easy to use it's a good quality unit.

Because oil is thick pull handle slowly or it will break. Works well if you do multiple pulls

works as decribed