BestEquipRotary Table 6inch(150mm) Horizontal Vertical Milling Table 2/5inch(10mm) 4-Slot Milling Rotary Table MT-2 Rotary Table for Milling with Indexing Plate Set for Precision Milling Drilling

Used this rotary first to cut circles in some light metal sheets and the some heavy milling on machine parts. It worked as expected and was very accurate. I have not used the divider yet but expect it to work as effetely as the first.

Trying to buy a good one at reasonable price can make you crazy. There is the Taiwan “V” model, Chinese knockoff, and Indian knockoff off the Chinese knockoff. Impossible to tell what you are getting from online sellers. One clue is 4 slot table vs. 3 slot. This one is Chinese 4 slot table, apparently identical to one sold by bear guys for higher price. Came well packed oily and clean, with nicely ground surfaces, and WITH an inspection sheet showing tolerance compliance measurements. My measurements showed almost zero detectable runout in table or parallelism. Rotation was butter smooth. I am giddy with purchase. Highly recommended. Does not come with tailstock in this package option

It works well. Functionally, it’s pretty great.It comes with some extras, but not much of an explanation. Because it can mount parallel or perpendicular, it lacks a way to clamp it to the table for parallel use. I had to machine a toe clamp to hold the other end. Thankfully, I have a mill. But, it’d have been so much easier to include one since it’s necessary.Otherwise, the 90 turns for 360 (1 for 4), works out pretty well for any angle divisible by four - 72, 60, 120, etc. I had to machine a way to attach my lathe chuck. Spent a half hour making the little piece I pictured… worked well for not using the dividing plates.Solid. Fairly precise. Works. But you’re going to have to make things to use it.

The rotary table is great value considering it comes complete with indexing plates. The table is perfectly true to the base. There is a tiny amount of lash in the rotary dial, but I will adjust that out. I put a dial indicator on it and the runout is less than 0.001”. I mounted a 4 jaw chuck on it, and it makes holding and tramming the work piece so easy! The only issue I had was the handle for the rotary dial was missing from the box, but the supplier was super responsive to resolving, that I still give it full marks!

Good quality and accurate.