3M K-Type Thermocouple 100mm Sensor Probe Temperature from -100°C to 1250°C

Okay. I am amending my review. I replaced the connectors with a 2 prong plug that fits the thermometer that I bought and it works perfectly. It is very very accurate and gives clear, non fluctuating temperature readings.

I use this thermocouple with a Flute multimeter to confirm that the hot air from SMD Hot Air Rework station has the correct air temperature. Compared the measurement results with the results from another known (and expensive) instrument. The test results are consistent.

Everything was great but the covering next to the connector was starting to peel back, not a deal breaker just an observation

Very accurate, but don't get it wet. I submerged it many times using it to measure the temp of my mash for beer Brewing. Eventually the probe started to read inaccurately. I purchased a new one and all is well again. Lessen learned.

This is a decent quality type K thermocouple, but please be warned: the ad says “1250 C”. NOT A CHANCE. Make that “C” an “F” and you’re good. I used this as an EGT probe in a mini turbine. At 1600F it melted the probes metal casing which promptly disintegrated and blew itself apart. If you are using it under about 1400F, you should be good, and it will work fine. Just dont believe that 1250C rating. Totally bogus.

Replacement for similar thermocouple that went bad after 2 years of use. If I get the same life out of this one, I’ll be happy.

My Cerakote cabinet wouldn’t work - and then I replaced the thermocouple with this unit and it is spot on!

Can you please confirm that the maximum temperature is 1100 °C? We bought it and it is transferring the data max 100C