JDOITY 32oz Crystal Clear Epoxy Resin Kits Casting and Coating for Art, Jewelry, DIY, Craft by 1:1 Ratio with Silicone Measuring Cups, Stir Sticks, Gloves and Apron

Please be careful if you buy this one. It heats up so hot i felt the heat just from holding the cup by the part you sip on with glove on. I've attached a photo of 2 cups. This resin ate through the first cup before I could finish pouring 28 dominoes. Not even 5 minutes in I felt the heat and had to run to get another cup. The resin ate through that as well. Please please be safe. wear gloves and more. Better yet maybe don't buy it. The resin didn't even move in my tray the way resin does as I write this review. The tray is hot. I will see in the next day or so if this even took. Either way I believe this has to be returned. Just don't do it.Update 6 days later. I added my completed dominoes. The product is good in a sense that it is clear however. They are still sticky somewhat to the touch. I'm in a hot climate so these should be set by now. Also on the packaging it says you can heat the resin with hot water prior to mix to eliminate bubbles. I do not recommend this due to how hot the resin gets so fast. Also you have to work quickly. This resin barely moves. It seems to be a little less thick like as taffy. You're definitely not going to see your colors moving in this resin. If you take too long to work you will start to feel the resin heat up. I don't want to buy this product again but I have to one more time to complete a project and I need the and brand resin since I've ran low. Oh one more thing, I have no issues with bubbles like others. I mix for the amount of time as mentioned in directions and spray with 91% alcohol. This resin is 100% clear. No yellowing. No bubbles on any of mine.

This is a good resin for molds, tumblers, ect BUT u must work in a room that can hold heat. I'm talking 90 degrees. The hotter the room the faster it cures as well as no craters/fish eyes on tumblers. I've worked with resin for 5+ years and have used many different brands. This one is in my top 5. Smooth look and very shiny. I recommend. Works great u just need a hot room to work in and cure in.After using a few times: I still stand by my review. After turning turning spinners for about 2 hrs, in a heated room at 90 degrees, it is tack free in 2 hrs! I really like this resin. I will definitely get it again.

This resin is easy to use and low odor so that is a definite plus. I've mixed four small batches and have had mixed results. Three of the batches remained flexible even after curing for several days. I was very careful to measure accurately, to warm the two parts before combining, to mix thoroughly, to allow the bubbles to come to the top and to pass a heat gun over the mold after pouring. The temp in my craft room is a steady 70-72 degrees f and I covered the pieces to keep them out of a draft while curing. I'm at a loss as to why they won't harden and would appreciate any advice or suggestions.

Bought first one, it worked perfectly. Dried in few hours. Needed a second coating so I got another set from the same seller/ brand. Its been 5 days now, the cover never dried, stayed sticky and wet! It was something very important and of hight value that I coated it with! So I can not replace it. I requested a seller to send me a new pack for free and to make sure that it was one of the latest ones to assure it will work perfectly. Seller replied “yes buy another one”.I can mot return the pack bcs I used it and it and it ruined the whole thing. And I will not be buying again to avoid toping up with the same problem.Purchased from another brand hope it will fix everything.

I used it for a small project (charcuterie board) and only time will tell how it holds up. Came out solid and pretty so it served its purpose…for now.