iSANMATE 3D Printer Filament Bundle - Pla Filament with Wood, Pine, Sandal, Yellow Pear, and Ebony - 1.75mm, 250g x 4 Pack (20% Wood Powder + 80% PLA+)

!! UPDATE !! After writing my review the company immediately contacted me to ask if they could send me new filament and correct the issue. It was shipped in less than 24 hrs and I recieved the new filament within 3 days. I am very impressed with this company the customer service was wonderful and they corrected the problem immediately without any hesitation. I would recommend this company to anyone. 5 stars most definitely. Only 2 out of four rolls printed correctly the other two rolls had obviously taken in moisture at some point because it bubbles when trying to extrude and you cannot print with it so expect only half of what you pay for

This isn't your normal PLA. Not even close. Testing is a must. Temp tower had stringing from 190c to 220c. Had no adhesion on magnetic plate until 200c, and plate was at 60c. When it sticks, it really sticks too. I could only remove the build while the plate was hot. Got a clog mid-print also...luckily it was a short print at only 3 hours and I was there to catch it. Drying didn't help. The one positive is that it does hide print lines very well. No zits or bumps, but there was a ton of stringing that had to be removed. I'll keep testing, hoping to find that magic combo of temp and retraction. But for now, I don't trust this filament. Update: Seller has reached out to assist with my issue. I am hoping that I may have just received a bad batch. It happens. I will update when i hear back. It's good to know that they are listening, that gets a thumbs up from me. Stay tuned :) Update 2: Well, they left me hanging. 5 days with no communication. Lots of pictures were provided, with lots of stringing and bad adhesion on test temp towers and wagon wheels. Of the 2 rolls I used, I found the best prints were at 180c, high retraction, 90% flow rate, 50c bed. But they still produced less than acceptable results. Conclusion: So, I really wished this worked. I like the look of wood prints, but this filament just has too many issues...from clogging, stringing, adhesion, etc. I do see some of the other reviewers saying it worked for them, so my thinking is that I just got a bad batch. To be fair, buyer beware, and I hope you have better luck that I did.

Probably the driest filament I have received in the last couple of months As a result the filament is very pliable. Good plate adhesion and nice printing.

Had to change nozzle to .6 to use this filament without issues. .4 nozzle was constantly clogging. I think if you changed temp in print settings correctly the .4 nozzle may work ok. I'm just not that skilled yet.

Awesome stuff, now my favorite filament. I have four machines which are all built to perfection. No banding walls are always smooth yet this filament has proven to be the most beautiful that I have ever used. It has a perfect surface that truly looks like wood even in dynamic mode, which is .16 layers it melts the lines together so well that you can’t even hardly see the lines I will be getting more of the stuff as soon as I’m close to running out.

I was excited to explore the world of wood tone PLA filament for my 3D printing projects, and the variety pack offered by [Brand Name] caught my eye with its enticing range of colors. However, my experience with this filament has been nothing short of frustrating and disappointing. The primary issue I faced was the filament's inability to adhere to the print bed. Despite meticulously adjusting temperatures and experimenting with different bed treatments, the filament consistently failed to stick, resulting in messy prints and wasted material.

I ordered a 4 pack of different wood filament. One of the choices was Ebony wood filament. The supplied photo compares Isanmate Ebony Filament to Amolen Ebony Wood filament. I also included a bottle of Ebony paint for comparison. Isanmate has supplied what they call ebony but it is actually a brown instead of black. This is a mislabeled product. Ebony wood is a natural black brown, not a reddish brown. The manufacturer needs to check the accuracy of their product. The supplied product works fine as a filament, it is just the wrong color.

I love this product to the utmost possibility, then an extra amount to boot. My friends and relatives join me in boosting this product to the utmost extent, for this product's quality literally brings me to tears by its specialness and quality. I cannot recommend it highly enough due to its special nature and unique qualities. You will find satisfaction to a glorious 5-Star nature when you purchase this product, let me tell you, friend!

Great colors and strong, this PLA is easy to print using common PLA settings, 208 C at 100mm/sec using a 0.6mm nozzle. I have a homemade delta, so I was pleasantly surprised by this filament, being a more successful blend of wood flour and PLA. It has a nice woody smell and should not burn, as long as speed and temp are well balanced. It adheres to the printbed easily and rarely fails to perform. Ive been using it to develop a spring driven bolt bow for small projectiles. So far, problems have been with the design, not the filament.

Very good quality and print looks just as it should

Intried differents setting, but about 80% the time the adherence is really hard yo get, and it clogged the nozzle. I never experienced that king of problem with the other filaments brand I owned. Frustrating

Printed just like any other PLA. No clogs and not much stringing.

The material does not stick to itself well, despite several attempts and adjustments. The finished product is not solid and small layers may separate.