Pixel e-TTL Flash Hot Shoe Adapter with Extra PC Sync Port for Canon DSLRs and Flashguns

Added a Tilta Cage to my Canon R6 II. I never take it off my camera. However, it blocked me from putting a flash on it. This item raised it enough for my flash to fit. It syncs fine and I have zero issues with it. It is easy to use and fits firmly and mounts right on top of the hot shoe is very light weight. Love it! Buy with confidence!

My Canon R5 has a SmallRig and a flash I had purchased didn't fit because if it. With this hot shoe adapter the flash is able to clear it and I'm able to keep the SmallRig on. It works with the adapter on and there is no delay or faults while using it.

I am a professional Wedding photographer and the Canon 6d that I use as a backup camera body doesn't have a PC sync port built into it (i know...shame on canon). I shoot off camera flash and I needed a PC sync port to plug my Cybersync CST trigger into as I like to have 1 speedlight on my camera's hotshoe and then have the CST trigger firing off the remote flashes via the PC sync port. I had my 2nd photographer shoot with this adapter for the past 3 weddings and it has held up really well. It has threads on the port so I can still use my screw lock cables and it locks down extremely well to the hot shoe. No risk of it falling off with a flash attached to the top of it. The plastic seems durable and of solid construction. Glad to see a great work around that didn't cost a lot of money. To those that are looking to use this as an adapter to run a PC sync cable to a flash, ....this isn't the adapter for that. I have yet to find one of those adapters on amazon, but I know that Flash Zebra has a few different ones that work well.

Bought in September, but other than testing that it worked at the time, I didn't get a chance to use it until after Christmas. The build was nice quality, especially compared to another pc sync hot shoe I have, but this Pixel hot shoe quit working within 2 weeks. This wasn't user error, as I tested it against other flashes, shoes, and cables to make sure it was the actual shoe and not anything else in the system. Very disappointing, and there's no option to return or exchange, so buyer beware.

Works as advertised. I have an old Novatron 3 light system that requires a sync cable. This work great on my Canon R series bodies.

If you are looking to add a PC port to a remote speedlight, this is NOT your solution. The PC port only functions to SEND a signal out and will not receive signal. For example, if the adapter is mounted to your on-camera hotshoe you can plug a cable into it to send a signal from your camera to an off-camera device. However, if you mount this adapter to an off-camera speedlight attached to a wireless receiver via the PC port, it will not work. There are other adapters out there for this purpose, but they are not (yet?) available on Amazon. For that, do an online search for “Flash Zebra PC to flash hotshoe adapter”. That being said, if you need a device to add a PC port to your camera, this seems like an adequate solution. I didn’t experience any problems when testing it that way.

Ok people, this adapter works great for what's its designed to do,this adapter is for ON THE CAMERA to give you a PC sync trigger signal output, is not to be used as a PC sync input adapter on a remote flash... The way I am using the adapter I have this Adapter directly on the hot shoe of My camera (Canon T3i), then I have an off camera E-TTL extension cord connected to the shoe on top of this adapter and it runs to my Canon Speedlight I use as the key light in a softbox. I then also have a PC Sync cord connected to this adapter which is plugged into my radio transmitter (aperature Trigmaster plus) which Sends out the signal to fire my 2 additional softbox strobes as fill lights. In this setup I get 2 fully manual, RF triggered fill lights plus my Key light thats connected with the E-TTL cord so it can function in full E-TTL mode. I could have put my RF Trigger directly in the camera shoe and used a 3rd RF receiver to trigger the key light but then I wouldn't have been able to retain ETTL function on the Key Light. I need this adapter to make my setup work and use the radio trigger + keep ETTL function.

Is not compatible with my canon R50

Acheté simplement pour pouvoir mieux fixer un emetteur radio Elinchrom Skyport Eco sur mon boitier (le truc avait tendance à bouger d'où pas mal de declenchements ratés) , resultat : aucuns problemes de faux contacts, et de plus le Pixel TF-321 possède une prise synchro qui n'existe pas sur l'eos 6d, donc très pratique pour y brancher un cable et utiliser des flashs sans passer par le declenchement radio.

I decided to purchase this item as I needed a hot shoe adapter to connect my camera to a set of studio strobe flash units in the photography studio I hire for studio portraits. This item is a great alternative to using wireless triggers for studio strobe flash units. I usually use the wireless remote trigger supplied by the studio I hire to fire the studio strobe flash units, but found them to be quite temperamental if running low on battery power & would some times fail to fire the studio strobe flash units every time. I was therefore very relieved to come across this very handy adapter online & ordered it straight away. The adapter is designed to work with DSLR camera which do not have the PCI input featured on higher end camera bodies such as the Canon EOS 7D upwards & is very handy for cameras such as my EOS 60D. The adapter simply slots on to the top of your cameras flash hot shoe adapter & features a PCI input to allow you to connect your DSLR to the studio strobe flash units via a sync cord cable. I have only used this item once for a studio shoot this weekend, but found the unit to work absolutely flawlessly & fired the studio strobe flashes every time without fail. I will definitely be taking this adapter with me to every studio shoot I do from now one. Definitely recommended if you need to connect you camera to studio strobes, but lack a PCI connector on your camera body.

It’s not work with canon R50

Works perfectly. Build quality is top notch and the lock is great.

GFX100RF本体にTilta ビンテージカメラケージ 富士フイルムにGodox iT30Pro F iT30Pro-F TTLフラッシュ（富士フイルム富士カメラ用）をつける場合...。 GFX100RF上面軍艦部分にもTilta ビンテージカメラゲージを装着する為、どうしてもGFX100RF上面軍艦部分 が厚みが生まれる。 厚みが生まれた結果...Godox iT30Pro F iT30Pro-F TTLフラッシュ端子部分の隙間が狭くTilta ビンテージカメラケージが干渉してGodox iT30Pro FiT30Pro-F TTLフラッシュが刺さらなくなる。 その時に【PIXEL】 ホットシューアダプター キャノン専用 Canon 互換を装着してからGodox iT30Pro F iT30Pro-F TTLが装着出来て高さが稼げた分ストロボの光が下側にも光が届く様になりかなり気に入ってます。 因みにCanon用を買ったのですがFUJIFILMの GFX100RF本体でもストロボ設定が出来たりして私的には問題なく使用してます。