KeylessOption Key Fob Replacement for 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Ford F-150 F-250 F-350 Explorer Lincoln Navigator MKX Remote, 4-Button CWTWB1U793, Programming Guide Included

Works great. They weigh about the same as my oem keys and the remote start function works great from 100ft or more away.

It worked as described, however for my 2011 f150 lariat with remote start, I had to use forscan to program the ignitionchip part first to be able to start the vehicle, but buttons did not work thats when I used the instructions that came with the controller for the buttons to work, it's weird but that's how I got mine to work flawlessly. By the way it's a pain in the ass to find someone that will cut them, luckily an ace hardware made me 2 copies

I recently purchased the 2X KeylessOption Key Fob Replacement for my 2013 car, and I couldn’t be happier with the purchase. The fobs arrived in great condition and were an exact match for the original ones. They were easy to program with the instructions provided, and both worked flawlessly once synced to my vehicle. The quality of the fobs is excellent—they feel durable and well-made, unlike some of the cheap alternatives I’ve seen. I was able to save a lot of money compared to dealer prices, and now I have two extra working key fobs for my car. I highly recommend this key fob replacement for anyone with compatible vehicles (2009-2016 models). It’s a great value, performs well, and was easy to set up! Would definitely buy again!

If you need two SEPARATE keys (as many of us), these keys will NOT work for you. The system see them as one key (they are indistinguishable clones). When you program one in Forscan, the second will work automatically. Forscan/truck will not see 2 programmed keys, only one. Other than that it works well. Just a reminder - immobilizer is programmed (Forscan) separately from key remote buttons. To program buttons, you turn the key on/off 8 times within 10 seconds, then press any button on EACH remote.

This new, uncut, un-programmed chipped key fob worked great for us. We had the key portion cut at a big box store. Then used the original two chipped key fobs and the procedure in the manual to program the new key. Worked the first time. Programming chipped keys and chipped multi-button fobs for Ford Super Duty trucks is pretty straightforward with instructions in the owners manual (page 65 in 2016 Super Duty Owners manual). The procedure is: Programming 2016 Super Duty Key (From pg. 65 2016 Owners Manual) "1. Insert the first previously programmed coded key into the ignition. 2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. 3. Switch the ignition off and remove the first coded key from the ignition. 4. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition. 5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. 6. Switch the ignition off and remove the second previously programmed coded key from the ignition. 7. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. 8. Switch the ignition from off to on. Keep the ignition on for at least six seconds until you hear the door locks cycle. 9. Remove the newly programmed coded key from the ignition. The key will start the engine if programming is successful. You can operate the remote entry system if the new key is an integrated keyhead transmitter. If programming was not successful, wait 20 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to an authorized dealer." Programming a Spare Key "Note: You can program a maximum of eight coded keys to your vehicle. Only four of these can be integrated keyhead transmitters. You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle. This procedure will program both the engine immobilizer keycode and the remote entry portion of the remote control to your vehicle. Only use integrated keyhead transmitters or standard SecuriLock keys. You must have two previously programmed coded keys and the new unprogrammed key readily accessible. See an authorized dealer to have the spare key programmed if two previously programmed coded keys are not available. Read and understand the entire procedure before you begin."

This remote works with my 2014 Ford Edge SEL Remotes.com Comes with QR code that takes you to pairing website. Programming was simple did it in 2 minutes Same size and functionality of original Ford keys

Great price but not so great when the key quits working in less then 2 weeks, replaced the battery with a new Duracell & it worked for about 2 days then killed the battery, did it once more & same thing, battery dies within a couple of days - still starts the truck from like a normal key once you put it into the ignition but you can buy a normal key for about $2 bucks. I would like a fob that works as it should, even the ink rubbed off quickly. I would have posted tis sooner however the household came down with severe covid including myself.

So here’s what you need to know: 16 F250 with 2 working keys only one the unlock button broken. Have the key cut then have all 3 keys in your vehicle, insert 1st old key, turn on all the way but don’t try to start, count to 3, turn off and remove then install 2nd old key quickly and turn on the same way for 3 seconds, turn off and put new key in and turn on and you will hear door locks cycle. Turn off and remove key then reinsert and make sure it starts your vehicle. If the lock/unlock feature doesn’t work don’t get excited, insert an old key and cycle on and off 8 times leaving on the 8th time, hit the lock button on your 2 old keys then your new key, this resets all keys together. Turn off old key and all your keys should work for all features even remote start. This is the way it worked for me, I hope this helps someone do theirs! Hard part is finding someone to just cut a key you bought somewhere else, I found a local hardware store and payed $10 for his time. $25 is way less than the $250+ everyone else wanted.