ARANA Rear Hatch Trunk Struts Lift Support for 2010-2015 Lexus RX350 RX450h with Power Liftgate, 68960-0E030 Tailgate Shocks Fit Lexus RX 350 450h Base/F/Sportdesign Sport Models, 2 Pcs

Perfect replacement for my failed lift supports. Fit my 2008 Toyota Camry perfectly. Easy to install. Easy lifting firm support and perfect height

I installed these rear hatch struts on my Nissan Xterra after the original ones got weak and started dropping the liftgate. The swap was straightforward, and they fit the factory mounting points without any drama. The best part is the long term reliability. Mine have been on for the past few years and they still hold the hatch up confidently, even when I am loading gear and taking my time. No more worrying about the liftgate slowly sinking or coming down unexpectedly. They do feel strong, especially right after installation, so closing the hatch can take a little more effort at first. For me, that tradeoff is worth it for the safety and convenience. If your rear hatch will not stay up anymore, these are an easy fix that has held up well over time.

Direct fit. For my 10 ford edge. Instant improvement on lift and staying open. Packed well and arrived super fast. Very easy to install. About 10 mins. Great value.

ARANA Hood Struts proved to be a suitable replacement for OEM struts for my 2014 Tundra. They are currently providing solid lift and support for the heavy hood on opening. Installation was easy though no installation instructions provided. Product was packaged and boxed in a unique but secure method. Great replacement parts. Well satisfied.

Easy install and all parts were included for installation on 2012 Impreza. Took about 20 min total. Struts were held in place (compressed) by nylon straps and needed to be cut before the install - make sure the strut ends are facing away from you when you cut the straps. I added a dab of grease on the socket/swivel end. Don’t forget to prop up the door before dismounting the old struts. Can’t speak for the durability but it does the job and works like it should.

I have a 2015 Lexus Rx350. The trunk kept closing on my head. I thought this would be a costly repair but I started researching and found that these just pop on and off. And it really was that easy. Took about 3 minutes and it’s working great and seems really strong.

Fit perfect and was easy to install. Seems to work as well as the original part. Just installed one day ago, if any issues arise with time I will update. But so far I would recommend

Nice replacement for worn out struts on our 2005 Trailblazer. We just picked up this SUV with only 30K miles on it (average is only 1500 miles a year) but the struts seemed weak and we had to lift the tailgate. These new struts lift the tailgate for us. Installation was easy. You need to pop off the ball joint clips on the bottom and top of the old strut, pull it off the ball posts (easy, they just pop off), take the clips off the new strut, firmly pop it on the ball posts (should hear them snap onto the post), then push the clips back on. The top clips can be a little difficult - get the clip into the rear slot first then work your way around front with a flat head screwdriver. It needs to be fully seated in the slots to prevent the strut from popping off. You’ll understand once you look at the strut - it’s pretty simple. Also I did not need to keep the strut compressed to install - just pushed up on the tailgate a bit. Did it on my own but you may want a 2x4 or a second set of hands to hold up the tailgate while you work. Total install time for both struts was about 15 minutes.

Fit on my 2011 jeep and works great, easy to install

Easy to install, high quality, nice packaging.

a bit on the hard side, but still not a problem and I dont fear risking breaking the glass

They do what they are supposed to do. :-). Don’t bother removing the strip to put them in. Can just squeeze the socket over the ball.

Están muy buenos, se ajustan muy bien a mi Santa Fe sport 2016 y cumplen perfectamente su objetivo