LDHTHOPI Buffer Polisher, 1600W 7 Inch/6 Inch Rotary Buffer Polisher Waxer, 7 Variable Speed 1000-3500 RPM, Detachable Handle for Car, Boat Sanding, Polishing, Waxing

Great polisher for the price! I’ve been using this buffer for upholstery and car detailing, and it works amazing. The 1600W motor is powerful, the speed settings are smooth, and it stays stable even on higher RPMs. Comes with a good set of pads, so you can start working right away. Comfortable to hold, not too heavy, and delivers a really nice shine. Definitely worth the money — highly recommend!

Great product! Took the orange peel out of my truck hood

Worked great

This product is amazing and gets the job done. I have a brand new car and of course just like an older car, I knew I’d get a chip in the hood. I decided to purchase the Subaru exact match paint and clear coat and began applying the smallest amount of car paint. The paint pen has a large tip and I was getting frustrated with the application. I probably wiped it off with alcohol 5 times. After adding the clear coat, I absolutely hated the results. It looked worse than ever. I decided on using a little sponge on the area to remove the clear coat only to discover it was abrasive to my car. After multiple purchases, Scratchdent, compounds and to no avail, I decided to by an actual handheld car buffer. Easy to assemble, super easy to use and it comes with many levels of buffing pads. I started with the least abrasive and gradually worked my way up to semi abrasive ( the green waffle pad) VOILA, it started to erase the scratches and quickly removed the white haze on my hood. Make sure you get the buffer pad wet before using on a painted surface. Simply put, if it’s dry it can become to hot as it spins on the paint surface and cause marring.. Simply place the compound, 5 daps around the buffer pad and then lightly press down on the paint surface in several sections to evenly distribute the compound. Place the buffer on the paint surface and then turn on letting the machine do the work ( No force or pressure is required) For $60.00 this is a must have for your car, both old and new!! I avoided spending several hundred dollars at a detailing shop with this amazing product. 5 star review

I’m using it to polish marble so no comment on the car buffing capability. I have a small job, and it’s doing just fine.

I was skeptical at first because it was an offbrand, but it does everything that it says it’s does , once you get the right grit the right pads you can make that paint looks so good, go to a Maguires store and talk to the professionals !

Product works perfect and does a good job. Unfortunately during the first hour of operation the handle broke off! I contacted the manufacturer and they wanted me to BUY a new handle! Went to the hardware store and bought some epoxy glue and fixed it. But not happy that the manufacturer didn't want to help.

Got this to buff out my 21ft, 23ft, boats, a suburban, a celica, a couple of wave runners. The 21ft boat is only 3 years old and was showing oxidation on stern and ports sides. This machine was put through its paces for several days straight. I was out there at it a solid 6 to 8 hours a day since I had a bit of free time on my hands. I blame the Oxidation remover, polish, and wax kit I got for not giving me the results expected. At 1st I thought I am just not doing this right. I worked an area with the Orange pad and the oxidation compound and within hours its came back. Port side exposed to sun more than starboard with how it sits in the lift. So, I doubled down on the remover, bought some wool pads as the foam pad was already disintegrating. By the 4th day, my arms and shoulders were on fire and I had gone through the 3 step compounds numerous times. So, I grabbed my bottle of Mothers cleaner and Brazilian Carnuba Wax and made one last pass on the stern and port side. Well, sadly, the buffer was smelling like something burning, so I took the air hose and blew out the vents. Then while holding it vertical it starts cutting out on me. So, I open the side access ports and think the brushes are worn out. Nope, they look good. Back at it for a few minutes and its going good, then the burnt smell again and now the bearings in it are making a not so good sound like they ran out of grease. So, I returned it no problem. It from china, you get a good one or you don't. I may just be too hard on my stuff. But when polishing and buffing out a car or boat, size and strength does not matter because you actually have to control the machine so you don't push too hard all day and possibly burn through. Slow steady movement and change directions constantly and keep moving. So, I am 6 ft and 200lbs which means nothing when buffing. I am actually not even letting the weight of the machine against the surface at times. I think it is a good machine and comes with a good selection of foam pads from course to fine, a 6 and a 7 inch buffer holder, as well as a spare set of brushes which are just clipped in once the access hatch is removed with 1 screw. I just got a bad one or I should have let it cool off more often. Since I hold it at the head most of the time, I can feel it getting hot. Maybe I should have opened it up and made sure there is sufficient grease in the gear there where it is doing a 90 degree change in direction. I still have a HF tool from 25 years ago that works fine. I bought one for my brother that didn't last 5 minutes. It is what it is when buying these tools these days. Cheers!

no calienta la lámina por su acción doble, comida, tube que abrirla para ajustar los carbones que traía por qué a la segunda usada dejo de trabajar sola y ya después ha funcionado muy bien aunque no le he dado tanto trabajo me gusta bolsa de transporte y los pads pues como se esperaba súper económicos casi no duran

No issues with the unit apart from the lack of a variable trigger , all pads and discs held up well on one job so far.

Yep if anyone is wondering about the oscillation of this nice polisher it's a 9 mm ,not a 8 mm ,a 15 mm or a 21 mm!!!!Works very well,provided buffing pads are average quality,I recommend getting some extra high quality pads to get the job done like a pro....Make Shure to use clean and damp pads, put no pressure on the polisher when using it,this way you will get the maximum performance out of it.Did my Jaguar F-Pace S with it and got amazing results!!!!!Gotta use comon sense and remember this is not a grinder don't go crazy with it and use mega pressure or edge grinding.....You can literally use one hand letting the tool do its work, this way you will achieve wonderful results 😱

Al momento de quererla usar para pulir mi carro, se apago y ya no quiso prender, no se sobrecalento, se apago después de pulir media puerta, espere al día siguiente para tratar de volverla a usar y ya no prendió en lo absoluto

Fonctionne bien ,pratique!