YONGNUOYN-622N-TX i-TTL Wireless Flash Controller for Nikon D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100 Cameras

An excellent piece of kit. This is a wireless TTL controller which has to be used with compatible triggers so I use it to control two YN-62nn triggers, and it works seamlessly. The option to control power levels and flash modes from the the controller itself, without having to dive into and plough through my Nikon's menu system, makes life so much easier. it costs a fraction of the price of other well known brands and so far it's worked every time and I've never had cause for it to be out of range. It's easy to operate and even controls some flashes I have that that the camera body doesn't always get on with.If I were to be really choosy, the only thing I would've liked to see on the controller is a pass through hot shoe like the triggers have, so that I could have the option of an on-camera flash as well as the remotes, but that would be me being greedy lolAll in all, an excellent piece of kit but you will have to buy at least one YN-622N trigger or wait until Yongnuo bring out a flash with a built in compatible receiver (who knows, there might even be one out there already!)

Product works fine very happy with it and highly recommend it, although I thought it was coming with as a set with YN-622N as it says (ADEVERTISED) Yongnuo Yn622n-TX controller used with Yn-622n and shows the both controller and transreceiver products picture (WHICH MADE ME BELIEVE IT WAS COMING AS A SET) but when open the box it was only the YN622N-TX Controller and no YN622N transreceiver... If I knew it was just the YN622N-TX I could have purchase it for £5 cheaper from else where. I feel like I been tricked in to buying this from this seller coz of the way they advertised but I reread the product description that only controller is in box and not the transreceiver at the end of the page! Had to wait for my two YN622N to arrive for a while after the disappointment. Very good and easy to use this controller sits perfectly on my Nikon D800, using Nikon SB910 and thinking of buying Yungnuo flash gun deciding which one to get at the moment :)

Works well with Yongnuo flash, does the job, very useful item to have.

Although the controller works well with my Nikon D7000 and it a bit temperamental with my D750. This isn't a fault on the Yongnuo but with the hotshoe that Nikon in their own wisdom have made the hotshoe of the D750 a fraction longer! What I have to do is that after I have fitted the Yongnuo controller onto the hotshoe I have to press the controller down a little until the flash starts to fire. After that it seems to work fine.One thing that Yongnuo haven't mentioned in the instructions is that you must set your Nikon Speedlights to TTL mode in order for them to work. This doesn't mean that the Speedlights will only perform in TTL mode. If you want the speedlights to work in manual mode you still need to keep the speedlights in TTL mode and on the Yongnuo controller you choose manual mode from there. Weird I know but this is the way they work. JUST MAKE SURE YOUR SPEEDLIGHTS ARE IN TTL MODE.

Fantastic, works well with Nikon D750. Packed with easy to use functions. One thing I did note, make sure it is sitting correctly in the hotshoe, as if it is just a mm out of place it won't function. There is a little drop down pin when you wind the shoe ring down which must locate in a tint docking hole.

Very easy to use nice and clear simple display that lays flat on top of the camera unlike the Phottix that stands vertical. It works great if you want to shoot your flash in manual even though it is in TTL MODE on the flash body just set it to manual on the controller no need to go back and forth to the flash its so simple to use and the price is amazing!!! The build quality is not as good as the Phottix but when you can buy a Yongnuo controller and two triggers for less than a price of one Odin trigger who cares .... THEY WORK AND THAT IS GOOD ENOUGH FOR ME!

Be careful, This is a great trigger and is now powering three of my flashes remotely. Dead easy to set-up, its a good idea to watch YouTube videos and watch others using theirs.Why did I say be careful? The instruction manual tells you to download the firmware form Yongnuo website before first use. I did this and broke my first unit. The LCD wouldn't work, in fact it was dead. Thinking it was faulty I sent it back the same day and got a replacement, well done! Amazon excellent Prime service. I again downloaded the firmware and guess what! same fault. I was just about to send it back again but decided to try install the firmware again. My device is for a Nikon camera, I had installed the Cannon firmware; no wonder it didn't work. Duh! I then Installed the Nikon firmware and all is well, Phew!YONGNUO website http://www.hkyongnuo.com/e-ourproduct.php?category=2.Flash%20Equipment Select Product GallerySelect Next then find the driver and software you need to download this appDriver & Software:http://yongnuo.com.cn/app/YN_Trigger_Updater.zipDifferent devices have different pages The Cannon is the first one you will see PLEASE NOTICE THE DIFFERENCE!!http://yongnuo.com.cn/app/YN622C-TX_FW_V1.08.zip CANNONhttp://yongnuo.com.cn/app/YN622N-TX_FW_V1.06.zip NIKON

it is really good device, I like the build quality , it is easy to have access to all of yout flashes it seems that it is not accurate for TTL photography but for me is great because I'm using manual mode. the only complain is when it is connected on camer and camera is on tripod , it is not easy to see display and buttons. i suugesst in the future design make it vertically same as phottix.

Compre este Transceptor ya que tengo dos radios YN-622n pero siempre tenia que variar la intensidad del flash manualmente presionando los ajustes en el flash y me quitaba mucho tiempo en las sesiones ya que tenia que detenerme e ir hasta donde estaba montado el FlashSB-910 y mover las potencias y eso en la practica es molesto para uno como fotografo y para la persona a la que estemos fotografiando ya que la hacemos esperar mas de lo necesario, y con este radio es sencillo variar la potencia directamente en el radio lo cual hace el trabajo mas sencillo y rapido, muy recomendado, Felicidades a Profoto y a Amazon que los enviaron muy rapido y llegaron bien

une télécommande qui permet le travail avec flashs ttl,(NIKON),ça fonctionne parfaitement,on peut seulement regretter le manque de notice en français,tout le monde ne maîtrise pas l'anglais (ce qui est mon cas),avec un peu de pratique on s'en sort,.très bon matériel à recommander de plus une télécommande à ce prix il n'y a pas à hésiter

El producto llego a tiempo, en una caja amazon y dentro con su caja original, manual en chino e inglés y su garantía. Tengo una cámara y un flash externo SB910, ambos nikon que se conectan entre si con el sistema CLS con el que vienen a través del flash incorporado, por lo que no necesitaría este producto salvo para evitar los molestos destellos que a veces íinciden en la toma (no sólo por si estás haciendo retrato y estás muy cerca, también si hay un cristal o un tv de frente por ejemplo). Pero me equivocaba, con este transmisor consigues mucho más!! Es tremendamente cómodo manejar el flash lejos de este y sin necesidad de entrar en el menú de la cámara.Ganas mucho en tiempo y ganas en "ganas" de probar cosas. Al principio este disparador te puede parecer un poco grande comparado con los demás (que no son ttl), pero al usarlo ves lo cómodo y rápidisimo que cambias todos los parámetros, incluso algunos que no tendrías tan a mano por tener que entrar en las profundidades del menú de la cámara. El menú es súper intuitivo y tienes un botón para cada cosa directamente, sin complicaciones. La respuesta es en inmediata, incluso despierta al flash enseguida, cuando este se pone en reposo.La sincronización es perfecta, respeta el ttl, manual y la velocidad de disparos en ráfaga con flash (la de mi cámara es de 6 fts) con este disparador me permite hacerlas y va rapidísimo (ya haré pruebas para ver si difiere mucho de tener el flash en la zapata de la cámara). Por supuesto, con el CLS de tu cámara olvídate de hacer ráfagas porque la velocidad de reciclado es mucho mayor, pero al dejar de usar el flash incorporado como emisor y colocar este disparador ya puedes. Esta es una de las razones por las que elegí un disparador, ttl y este modelo en concreto, por la pantalla y que incluso te permite manejar el zoom del cabezal. Solo echo en falta que te deje manejar también la apertura del cabezal, pero no se si existe alguno que lo permita.Bueno, conclusión, este disparador te cambiará la manera de usar tu flash, lo usaras màs y mejor!!!Si hago esta reseña es porque cuando yo buscaba no encontré una tan completa, espero haberte ayudado a decidir, a mí me llevó mucho tiempo (yo te lo ahorro ;-)Nota: para poder usar este disparador necesitas su receptor, el YN622, mejor si es la versión ll, que viene ya con usb para poder actualizar el firmware.

Abmessungen: Länge: 8,9cm; Breite: 5,3cm; Höhe: 3,9cmGewicht: 81g (133g mit 2 weißen Eneloops)Ich habe das Gerät zusammen mit dem Yongnuo YN685 an meiner Nikon D7100 getestet►Pro:- Einfache Bedienung möglich- Blitzleistung über links und rechts in vollen Schritten möglich, nach oben oder unten in 0,3er Schritten- Gute lesbare Anzeige, grüne Hintergrundbeleuchtung ermöglicht ablesen auch bei starkem Sonnenlicht- TTL Übertragung möglich, ebenso wie HSS bis 1/8000 Sek und Blitzen auf dem zweiten Vorhang- Sehr gutes und auch breites AF Hilfslicht (kann auch ausgeschaltet werden)- Nur wenige, wie dieser Auslöser, ermöglichen es die Firmware des YN-685 über Funk zu übertragen- 2,5mm Blitzanschlussbuchse, ebenso eine Buchse für den Anschluss an die Kamera und eine USB Buchse- Akkuanzeige- Saubere Verarbeitung- Kameraanschlusskabel MC-30 und Kabelfernauslöserkabel MC-DC2 liegen bei►Neutral:- Nur englisch und chinesische Anleitung (Englisch ist aber gut verständlich)- Benötigt 2 AA Batterien (nicht inkludiert)►Contra:- Ich war nicht in der Lage die Zoom Stellung des YN-685 über diesen Auslöser zu verändern (mit Nikon Blitzen soll es laut Reviews im Netz gehen)- Kein USB Kabel für Firmware Updates im Lieferumfang (Micro-B)- AF Licht funktionierte bei meiner D7100 nur nach einem Firmwareupdate (finde ich daher nicht wild, aber das muss man vorher wissen)- Keine Schutzkappen an den Buchsen►Fazit:Insgesamt würde ich dem Funkauslöser daher 4,5 Sterne geben. Das Kabel muss man sich wohl leider einfach noch dazukaufen oder hat ein solches eh schon. Schutzkappen fände ich für die Zukunft aber wünschenswert.~~ Schlusswort ~~Über jedes Feedback freue ich mich.

Ottimo prodotto anche se "cinese", materiali e finiture eccellenti. Lo uso con D700 e SB900 senza problemi e permette di modificare le impostazioni del flash senza perdite di tempo e distrazioni. Il suo acquisto mi ha permesso di "liberare" uno dei due trigger Youngnuo 622 che potrò usare sul prossimo flash che comprerò! Regolazioni molto intuitive e di veloce apprendimento, comodissima anche la rete di raggi che proietta per facilitare la messa a fuoco con scarsità di luce. Insomma un eccellente prodotto ad un prezzo più che accessibile. Consigliatissimo.