Specification: Auto start port: 12V USB output current: 2.1A Charging voltage / current: 15V/1A Starting current: 200A Peak current: 400A Full charge time: about 4 hours Cycle life: more than 3000 times Operating temperature: -10 - 85 C Warning: Do not reverse the operation sequence of the jump starter. Do not use jump starter to start vehicle if the number of indicate or lights are less than 3 to protect the jump start from damage. Do remove the jump starter from the vehicle battery within 30 seconds after the vehicle started Special Precautions of The Auto EPS. Start the car is to clip the battery clip blue plug, plug in place, otherwise it will affect the starting effect, and even cause the dissolution of the joint plastic. How to use product to start a car? 1.For jump start your car,please first check your car's displacement to make sure it can use. 2.If you car's battery is good and you just want to test this emergency battery.please do below "A" to 3 If you car's battery have problem and can't start car,just do below"B,C,3" A: Loosen the screws on your car's battery,just need loosen one pole B Connect red clamp to positive wire,black clamp to negative wire.please make sure there is enough contact surfaces. C Plug into battery hole,please plug into the end 3.Switch button to "ON",then Press the round power bottom,and go to your car to start. 4.After start your car ,please take off the clamp in 30S. Note:IF your car's battery is well and you don't do the step,it may cause some damage to your battery!! Included: 1x Car Jump Starter Power Bank 1x Home Adapter 1x Car adapter 1x 4-Tip USB Charging Cable 1x 12V Storage battery wire clip 1x User Manual 1x Tool Box
ترست بايلوت
منذ شهر
منذ 3 أيام
