Fluval E 50w Advanced Electronic Heater

4th heater I’ve tried, this one is by far the best, keeps a very steady temperature. Very pleased with it, would definitely recommend it for your smaller tanks 👍🏻

UPDATE: Oct 2013 Still think this is a great product. No problems at all. Easy too keep clean. Still looks like new. Currently checking with FLUVAL as I have been told this range has an auto shut off if you forget to turn the heater off when draining the tank ( does not say this on their site though). I will post another update once I have had feedback from Fluval. Original review This is a great little heater keeps the water temp very stable. I have a digital thermometer probe in the tank 2 as a double check for even heat. I bought this heater after I broke my original and very basic heater by doing a 25% water change without letting it cool down or switching it off! Not even this heater will stand up to that, however the cage surrounding the heater tube would catch any glass should you make the same mistake, though its primary function is to avoid cooking you fish from close contact. The colour change backlit LCD screen is very handy and easy to ready. Red - too hot / Green - just right / blue - too cold, plus water temp in Centigrade or Fahrenheit. Adjusting the temperate is very easy in situ as well, with a simple and sturdy lever at the top of the unit. Theoretically you could get ride of your thermometer to make your tank more aesthetically pleasing through less clutter. (but best to have non electrical backup thermometer IMO in case of power cuts) The unit samples the water directly, rather its own internal temperate, to give accurate readings. Other features are: 1) to be able to detect low water circulation around the unit to avoid hot and cold spots and displays a flashing screen with LF for low flow if detected. This works well e.g. if you place the heater too near a side, vegetation or the bottom.. 2) flashing warning if external factors raise or lower the tank temp by 3 degrees or more. The unit also comes with two fixing bracket options to allow you to back mount in your tank and and an angled bracket for corner fixing. The suckers are very strong and also adjustable so you can more accurately raise or lower the height of the unit in your tank All in all a well thought out and well made heater.

Great heaters,unfortunately the one I ordered came with a two pin plug and not a UK three pin one so I had to return it as I couldn’t use an adapter in the space I have set up

you have to remove the bottom half of the casing/grill, i found this hugely impacted on the performance of the heater, the plastic seems to insulate the heat, for 2 days it was constantly in the blue and it could never get temp up by more than 0.5deg unless the room was hotter than the tank i read on a forum that people take off the whole guard and use it and its fine but you lose the mounting if you do this, when i removed the whole guard you can see only the bottom half of it actually covers the heating section the rest is all circuitboard, so i removed just the grille section this means you can still use the mount Now it works perfect, within minutes of removing the grill it actually started to heat the water so im sure that it was the problem, i have a mercury thermometer at the opposite end of the tank and its always same temp as the heater is reading so accuracy seems fine i got the "low flow" warning, which also apparently will cause the heater to turn off again affecting performance, ignore the instructions, i angled the heater so that it was at about 20-30 deg and ive never had it since Its a good heater but you need to adapt it to suit your situation, the digital display and adjuster are nice features

This heater was bought to replace an Interpet heater which came with my Interpet Pod 64 litre tank and had started to heat uncontrollably. I followed the instructions to the letter, placing the new Fruval e100 heater vertically (old heater was placed diagonally so this was odd for me), but after a couple of hours the temp started dropping. Eventually after a day or so, instead of 25oC it was 22oC and falling! I trawled the internet to read any forums I could find regarding this heater and found it is a very common problem with the Fruval heaters! The solution? Fully submerge it, tip it diagonally (something the instructions tell you NOT to do) and make sure there is a good flow of water around it, ie, point your filter at it. Switch it off for 1 minute, switch it back on, without pausing too long adjust the heat to max then drop it to the minimum and then reset the desired heat, in my case 25oC. This, buy the way, was alternative advice posted on a forum by a customer that had allegedly received this advice from Hagan (makers of the Fruval heater) when they got in touch desperate for answers! I thought, what the hell, i'm going to loose my fish if I dont try something. So I placed my Fruval e100 diagonally at 45 degrees, the filter is pointing at it and it is fully submerged and reset the temp as stated above. The temp started to rise from the disasterous 22 gradually thoughout the day right up the the 25oC and it hasn't fluctuated yet! You just have to play around with it in your tank to get the right flow around it and you're sorted. This worked for me and it seems a few others too. Most excellent, EXCELLENT heater! It was about to go back to the shop but glad I hunted around the forums for an answer first! Hagan need to totally rethink their instruction leaflet they supply with the heater and online or they are going to continue to have customers returning heaters to them or retailers for a replacement which may be found to be also `problematic'! Surely, cheaper to put corrective advice on their website?!!! The LED temp window is bright and easy to read (unfortuntately, it reads sideways now but hey ho...). Back light is green when temp of water matches temp you set heater at using the little orange lever at top of heater. Very easy to do. If it fluctuates by 1 full degree lower than your setting the screen turns blue. If one degree higher, the screen turns red giving you time to sort the problem. If it rises beyond 1 degree extra the red flashes. There is no red indicator light to tell you it is heating but you would very quickly know if there was a change by the temp window colour! I dont think it needs it, besides if you are bothered you can see the element glow if you peer in! From any position in my livingroom, I can see my heater is working fine. Happy bunny.

Working as mentioned in product description.

Good one

Best digital heater, perfectly designed and intelligenty programmed. Must for Aquarium Fish Lovers

Ich nutze ihn für ein 60l Becken. Ich benötige hier eine Temperatur von 25,5 Grad. Diese hält er konstant und signalisiert mir das mit einer grünen Anzeige. Wir es zu kalt wir für Anzeige Blau und bei Tot ist die eingestellte Temperatur zu hoch. Passiert schon nal bei höheren Außentemperaturen. Die Saugnäpfe halten sehr gut. Kläre Empfehlung.

great product works excellent