P38 Easy Sanding Body Filler 250ml Tin

Months ago, my wife hit a curb and lost a hubcap on our car. £40 each to replace! Even scuffed up second-hand ones go for £30+ on eBay. I couldn't stand looking at my car like that though as the alloys underneath are in a terrible condition, so I bought this smashed up one off eBay for a tenner. Then I bought this resin body filler and got to work once it arrived. I've never used resin body filler before, so I was really glad that the instructions were very clear, illustrated and written in plain English. I was able to get going straight away used a piece of leftover cardboard to mix up the filler on. As the instructions noted, I started off with just a small bit to get used to using it and also understand how long it takes to dry. It dries very quickly! Definitely inside three minutes, so be prepared to apply it. I roughly sanded the plastic surface of this hubcap with 80 grit sandpaper and it adhered to it very well. As you can see, I also rebuilt sections of the hubcap using sellotape to put the filler on, applying a lot of it (unsurprisingly it didn't adhere to the slick sellotape and moved around a lot) and then sanding it down, again with 80 grit, then moving to 120 grit once the majority of it had been removed. I then primed the surface and sprayed it, with the paint adhering nicely to the filler. The final result is very strong, much stronger than I though, at least and I'm really pleased with the result. This is excellent stuff, great value for money and ideal to have around as you can see it has a number of applications. If you appreciated this review, please leave a like and feel free to check out my website DadBuddyReviews for a step by step guide on how to rebuild hubcaps if you're in the same boat!

I use if for model-making. Easy to mix, reasonable working time - 2 minutes approx before it starts to go off (depending on hardener/filler mix). Sands very smooth and can be worked with abrasives and files with excellent results. It can also be used as a 'shell, slip or skin-casting' material (used with a suitable mold release) where you use the filler to cover the suface of a number of moulds of an object, allow them to cure, then release and join the seperate parts of the casting together without having to cast a single, solid piece. Once cured, the filler is very hard but in thin casts is brittle unless used with fine fiblreglass sheet. It can take very fine detailing without breaking/crumbling. I have used it to make new cupboard knobs. Oh, and if you have a car, it's very good at filling holes and dents! Great with fibreglass. :P Nimrod

Great product, just be sure to read instructions as you don't need much hardener and it sands as smooth as you need

Having worked in the motor industry for many years and having been around body repairs on vehicle's this filler has allways been used . I have taken up the hobby of building and repairing model boats and this has become a god send as some of the boats required filling so I have used this filler which is easy to work with but just REMEMBER TO ONLY USE A TINY BIT OF HARDNER AS IT GOES OFF QUICK OTHERWISE and if you make up a lot it ends up being wasted. I would recommend this to any one as can be used in a multitude of places

Exactly as expected. No issues. Used for car bodywork repair.

Does what it says on the tin. This product has been around for years- it’s still the best

Bought this to patch up and reinforce the fibreglass front of our folding camper which had suffered minor impact damage. As I was applying the P38 to the interior of a storage locker, I did not have to be fussy about the finish. I did the job on a reasonably mild day and was surprised at the speed at which it cured. With hindsight, I would have used less hardener to allow more time to work with the material while still soft. Best to mix up a small amount first to see how much hardener to add by trial and error. The product worked fine, was easy to apply and was rock hard by the following day with very little residual smell. I'd recommend good ventilation as the aroma is less than fragrant but the smell does disappear fairly quickly once the product has cured. I would definitely buy again.

It does what is says in the tin. TBH, I used it to fill a hole in my wall and re drill. Worked perfectly