Question 1

Is this 25w (per product name and description) or 30w (per features & details info)?

Accepted Answer

The UV LED light initially operates at a power of 30W.  After 2 hours of continuous use, it activates an overheating protection function，which controls the power to around 25W to extend its lifespan. Tip:To optimize the lifespan of the UV light used for screen printing, it is advisable to periodically turn off the switch and allow the lamp to cool for a few minutes before resuming operation.

Question 2

What exposure time/distance would you recommend for an 18x20 frame with diazo emulsion?

Accepted Answer

Exposure Time:
The recommended exposure time for our exposure unit varies depending on the type of emulsion and mesh count used.    As a general rule, most screens will require an exposure time between 8 to 10 minutes.    However, we recommend starting with a test exposure at around 7 minutes, and then adjusting the time based on the results.

Lamp Distance:
The ideal distance between the lamp and the screen varies depending on the strength of the light source.    For our exposure unit, we suggest placing the lamp approximately 12 to 18 inches (30 to 45 cm) away from the screen.    This distance should provide an even light distribution, ensuring a consistent exposure across the entire screen.

Please note that these are general guidelines and may require some adjustments based on your specific setup and materials.    To optimize the exposure process, we recommend performing a step test to determine the optimal exposure time and lamp distance for your unique requirements.

If you have any further questions or require additional assistance, please do not hesitate to contact our customer support team.    We're here to help and ensure you get the best results from our exposure unit.

Thank you for choosing our products, and we hope you enjoy your screen printing journey!

Question 3

How long did you expose your screen for? I see reviews talking about 8min and others talk about 10 seconds. Very confusing

Accepted Answer

It's going to be based off the emulsion you use. I mainly use ecotex and it has a UV recommended time. Generally 10-15 seconds.  Make sure you have something dark underneath the screen when exposing to prevent over exposure. I use black felt from Hobby Lobby.

Question 4

Is the item is safe ? does it overheat ? is it durable ?

Accepted Answer

This UV LED light is safe and durable. It is made of heat-resistant stainless steel material, ensuring that it does not overheat during use. However, due to the lamp's heat dissipation function, the outer shell may become slightly warm, so it is advised not to touch the lamp directly with your hand.

To prolong the lamp's lifespan, it is recommended not to use it continuously for extended periods. It is best to turn off the lamp for a few minutes every few hours to allow it to cool down before resuming use. By implementing this practice, you can prevent overheating and potential damage, ultimately enhancing the lamp's overall durability.

Best Sellers Rank	#59,500 in Arts, Crafts & Sewing ( See Top 100 in Arts, Crafts & Sewing ) #69 in Screen Printing Accessories
Customer Reviews	4.6 out of 5 stars 30 Reviews

Dorhui Exposure Unit for Screen Printing, 25W LED UV Screen Printing Exposure Light for Screen Printing Kit, Photo Emulsion and Cyanotypes

Description

Specifications

Common Questions