Plastic Glue, Clear, High Strength, 30g Super Adhesive for Plastic Bonding, Acrylic, PVC, DIY Models, and Other Materials

This is the best adhesive I have purchased. This glue is fast drying and works as described by manufacture.

On a practically new KIA Telluride, my wife was shocked to see a long crack going about half the length of the bumper. It appears to have developed simply because of stress within the plastic some time after the bumper was mounted. Starting at the center, where the crack was thinnest, I gently pried one half toward me with a thin knife, and got this free-flowing, instant Yeardera glue in very well using one of the thin nozzles. Going only a foot or so at a time, I pressed the halves together for at least three minutes, or until they seemed reasonably secure, and then would do another length. At the worst point, the crack was open about 1/8", and the tension on it was keeping it open. I wet the sides of the crack with this glue and then leaned my knee against it, working it slightly to blend the glue better into the plastic. After 3 minutes or so, maybe a little longer, the glue was holding even this part of the crack together, and when I could see that it was no longer able to separate, I left it to finish setting. The next morning, the whole crack seemed to be strongly bonded back together, with no changes from when I left it to finish setting. It seems like a nicely strong weld that should last. It will need a little touch-up of silver paint using an air brush, but the repair is quite clean looking, not easy to see beyond a few feet. I believe the bumper is made of PVC. What I like most is that, even with a tension that wanted to open the crack, this glue fairly quickly reached a state of holding it closed. It seems to give a good weld of this material.

No foaming or yellowing after drying. Comes with separate top for storage, and removable, disposable precision nibs. Not too runny or thick. Applies easily, dries quickly. I have used it to put models together, and repair a small delicate part broken by accidental drop/fall. Very pleased!

Comes out very fast. Rather messy. Bonds two pieces together. If spilled out of the two edges. It doesn't dry. It's been a week and it still is sticky and will bond with what ever touches it. Other than that bonds great. I even tried bending at break. No issues.

This stuff works. My microwave handle broke off. Tried all the other famous glues. None workedPut this on weeks ago and it's still holding on.

I followed directions precisely with use and closing it when finished, it worked as advertised but when going to use it again the glue had thickened up to the point of not being able to dispense it. I was able to open it after applying much force as it had dried shut, was able to get a little bit of glue out from the bottom but it was gummy and ended up on my fingers. This is a one use glue, buyer beware. I would have gone with a different glue had I known this as it is too expensive for one use.

This glue is fabulous. Glued plastic items with no issues at all. Best I’ve found for this use.

I recently broke my key to my car. The key needed to attach to the fob to work again. The glue is super strong, reliable, and easy to use.