Hydraulic Lifter Additive | 300 ml | Oil additive | SKU: 8367

An older boat, with twin Chrysler Marine 360's, with intermittent hydraulic lifter noise at idle on starboard motor. Isolating the noise to the specific location suggests one or two lifter(s) are (occasionally) remaining to some extent collapsed, resulting in increased clearance and thus noise. At higher RPM this disappears, probably as a result of increased oil pressure. Pressure gauges are in PSI and indicate that Oil pressure in the motors is within all specs at idle and speed with a solid margin of safety. Maintenance records indicated a sticky lifter(s) in past, but are incomplete in regards to service performed. Vessel is used and on third or fourth owner with rebuilt blocks. Both have sound compression and run smoothly with about 500 - 600 hours on the rebuild. How much was done and by who is unknown. 360 engines are flat tappet cams and are run on high ZDDP Oil specifically for this type of motor. To see if the lifter(s) could be freed up or performance improved, I added the Liquid Moly Hydraulic lifter additive to a fresh oil change. After an extended run of several hours, no lifter noise has was heard. The oil appeared to change color to a darker dirty color more quickly over the next few weeks of testing. I speculate that this is the result of the additive performing the described cleaning action. As a result of the discoloration, an earlier than normal oil change (1 month) was performed based on appearance (not analysis) and the additive used again. The theory was if we dissolve the crud; then remove the crud and start clean. Seems to make sense? A third change has just been performed after a full year/season, and still no noise. I continue to add 1 can per engine at each full oil/filter change. There was no desire to deal with the expense of new lifters/cam issues on an older rebuilt flat tappet motor. The engines are maintained carefully, and one can will be added to the appropriate range ZDDP oil at each change. My experience indicates: If the motor is mechanically sound, and lifter binding or clogging is the apparent cause of issues. Then this additive appears, as with many of the reviews, to restore the lifters to improved performance and quieter operation. As a comment. No engine additive can improve a problem if the internal engine condition is not suitable. In other words it can only improve the problem it is designed to fix. For this additive: low oil pressure, excessively damaged or fouled lifters, too much or too large dirt to overcome, metal particles in the oil, etc. could limit or prevent successful noise reduction. That's not a product issue, it is that these products perform a specific action and cannot work miracles on a junk motor. Negative reviews don't always take this fact into account. It can't rebuild a seriously damaged motor. It appears to clean a basically sound older dirty/worn one and provide improved lubrication and performance. It is not "Snake Oil". in my experience and did the job we asked of it extremely well. I first verified the basic criteria of engine vacuum, oil pressure, and smooth idle, etc. Then it was not hard to propose the cost of a new cam/lifter set vs a try at cleaning them up. I would never change lifters alone on a flat tappet marine motor, so we would have had to change the camshaft and lifters in place, then break in. I do not claim to be an engine expert, but for this specific situation, the thought was what have we got to lose? So far after a full season of run, it has been a great success. I will continue to use it at each oil change.

I tried this Liqui Moly lifter additive on a car that had some ticking noise and it did make a difference, but not immediately. After driving for a bit, the noise became less noticeable and the engine felt smoother. From what I understand, it works by cleaning internal oil passages and improving lubrication, so it may take some time to fully show results rather than fixing the issue right away . It is important to mention that this is not a miracle fix. If the lifter problem is mechanical, this will not completely solve it, but it can help reduce noise in mild cases. The bottle came sealed with no leaks and everything looked fresh when I opened it. Overall it is worth trying if you have minor lifter noise, just keep realistic expectations

Have used this product before and have liked how good it works for my vehicles. Would recommend product. Good quality and price.

I put in a bottle of the Liqui Moly and aftr driving th vehicle the little "tic-tic-tic when it was hot was nearly gone! I was concerned that because product is quite a bit thicker (higher viscosity) than the 5W-20, I was cocerned that the additive would make all of the oil a single thinker viscosity by making the polimers that change the viscosity as other similar additives have done in the past. So, I called the product assistance line and asked that very question! The rep assured me that wouldn't be a the result of using this addiive! I'll keep an eye on the viscosity when the engine is cold since the viscosity is "supossed to be) about the consistancy of water (5W) tto get oil to all of the engine upon startup. To answer the questions below: the appearance is opaque, it is unknown if it acually reduced friction, the cost is about equal to other similar products, no leakage was observed, the vehicle engine continues to operate smoothly but there is no wayto determine if there has been any cleaning action! However, the apparent sticky lifter noise is somewhat lessened, so far! We'll see........

I used it for the first time. The Mazda's Sky Active engine is known to be somewhat loud, due to the direct injection which is often confused for loud lifters. It does seem to have lessened a little, and it can't hurt to give a little extra maintenance to an older engine.

On all Chevrolet/GMC gasoline V8 engines from 2012 thru 2020 that has the Adaptive Strategy cylinders cutoff. The lifters are failing causing issues and a VERY expensive repair bill. To keep that from happening or lessening the chance of happening Oil changes on a regular basis will help and by adding detergent additives to quality motor oils will keep the lifters clean and lessen the issues with the adaptive strategy system. I have been using Liqui Moly Hydraulic Lifter Additive to my Oil Changes to keep everything working as it was designed to do and keeps valve lifters clean and operational. Also lubricates other vital engine parts as well. It DOES NOT extend oil changes so oil changes when the oil change light appears on the dash display it is time to change oil and if driving off road and in dusty environments go with 3 months 3000 miles. GM Mastertech

Dont know what all the hype is about liquid moly, I'm sure it will work for someone but it didn't work for me.

I work in a shop and just tried this product for the first time , worked better than expected. Will be using it on other applications.

Works like a charm!!

Excelente Producto

価格も手頃で効果もあり助かりました。 ありがとうございました。

Seems to have quietened down my timing chain in my 2014 Audi 3.0TDI

Efficace sur une 320i e36. Le clac clac au démarrage a été complètement réduit et a quasiment totalement disparu. Néanmoins, il m'a fallu rouler un bon millier de Km après avoir mis l'additif pour qu'il commence à faire effet