JDMSPEED 2 inch Triple Gauge Set - Oil Pressure, Water Temp, Volt Meter (Oil: 0-100 PSI, Water: 100-280F, Volt: 8-16V) - Fits GM, Ford, Mopar & More

Came as pictured, easy to install on my 83 el camino

It is exactly as described. I used on my engine test stand, works well for that.

Be very careful when purchasing this set of gauges from JDMspeed as they arrive defective. The volt meter needle is on the wrong side of it's set peg making the gauge no operational.

Works perfectly, fine quality

These really spruced up the look of my 1948 tractor. I deducted one star because the fitting on the oil pressure gage won't accept a 1/8 copper line. (as shipped) Carefully reaming the fitting while holding it so that the cuttings fall out solved the problem. Poly lines are a leak waiting to happen.

This is nice looking set. It did not have instructions but I have installed many gauges like these before so I knew what to do.The Oil pressure gauge hole for the tubing to slip into was too small and had to be drilled out. The tubing needs to slip in a bit to keep the ferrule away from the end of the tube. Otherwise the connection will leak or even blow off.The Volt gauge electrical connections are very small. Hard to find terminals that are that small. You can wrap bare wire around the posts but that is a bad way to connect it. The mounting bracket comes very close to the terminals and I had to grind away some of the mounting bracket for clearance.The volt gauge reads .6 volts low.The temperature gauge came with an adapter that isn't any size that I recognize. It is too small for 1/2 npt and too big for 3/8 npt. Doesn't even match a metric pipe size. I had to buy an accessory kit for the right adapter fittings.The temperature gauge reads correctly at 180F but is 5F low at 195F.

Awsome gauges work great.

Gauges look and work great. Easy to install. One more step on my '64 Barracuda restoration.