K3 Facial Interface Fan Compatible with Quest3

I honestly didn’t expect this to work as seamlessly as it does, but wow – the KKCOBVR K3 Facial Interface Fan with PU Leather Pad is a game-changer. I’m already using the BOBOVR S3 halo strap on my Quest 3, and this face piece snaps right into place like it was made to go with it. Installation was super simple – just pop off the old face pad and clip this one in. Done in seconds. The design is excellent. The PU leather pad feels much more comfortable on my face than the stock pad, and it’s way easier to wipe clean after long sessions. The built-in fan is quiet but powerful enough to keep the lenses from fogging up, which used to drive me crazy during intense games. Here’s the part that blew me away: since my BOBOVR S3 also has its own cooling fan, now I’ve basically got two fans working together. The airflow is fantastic – my headset stays cool, my lenses stay crystal clear, and it makes playing in longer sessions way more enjoyable. Why I recommend it: Perfect fit with the BOBOVR S3 halo strap – zero issues with compatibility Dual-fan setup when paired with the BOBOVR S3 (seriously awesome) Stops lens fogging completely PU leather pad is comfortable, breathable, and easy to clean Quick swap installation – takes less than a minute If you’re already rocking the BOBOVR S3 (or even just want a better face pad and cooling for your Quest 3), this is a no-brainer. The upgrade in comfort and performance is huge, and I honestly can’t imagine going back. Bottom line: this is one of those accessories that just makes sense – it solves multiple problems at once, feels premium, and makes the Quest 3 experience way better. Highly recommend.

Good product. I've been using with BoboVrS3 strap on my quest 3. Keep in mind that when you change the original facial interface for this one, it will block the air flow from BoboVR strap. But the air flow created by this interface is enough to keep your lenses fog free and the temperature on your face a little bit more comfortable. The boboVR will send the air flow more to your forehead area. But when the battery dies, it can get warmer than original Meta facial interface. The battery does long as advertised. Around 2h on high speed. The nose gap is not that great though. It let lights comes thru the nose are. Almost the same amount as the original metal interface. The facial pad is very comfortable.

Let me start with the cons about this interface. 1) It takes a long time to charge from dead 0 to 100% fully charged, so please take that with a grain of salt. 2) Depending on the shape of your face, a little light can come through from the bottom of the nose guard to help with heat relief, it doesn't bother ME, but it might not please some others. Finally 3) Depending on how you handle your headset, the interface can become dislodged from the housing, it's suppose to make it easier to take out to charge, but it is a little concerning when you handle the headset and see that the interface isn't anchored as well as it should be [this is the biggest gripe I have against it]. Now for the positives. It's very lightweight, the cooling system is spectacular because it dissipates heat VERY WELL so it's night and day between when it's running versus when it's not, it rest comfortably against the face (or at least it does on mine) and takes pressure off the cheeks/cheekbones, it's so easy to install that a child could do probably do it, the lightweight may make it seem cheap but it's sturdy and it does it's job very well. I have this installed on my Quest 3. I hope this review helps you make an informed purchase.

When I bought my quest 3, I was informed that I might need a fan to keep cool. Little did I know I wouldn't really need a fan. But since I have it, one day it will burn out from abuse use. The KCOBVR K3 Facial Interface Fan aims to tackle one of the Quest 3’s most common comfort issues: heat and lens fog during longer VR sessions. However, I found out that I wouldn't be using it like it was suggested that I might be using it. The built-in cooling fan is effective, and it helps move enough air to reduce sweat buildup around the eyes and completely eliminates lens fogging during high-intensity games or workouts. But my intentions aren't to be using it for long periods of time to generate fogging or sweat. It's not heavy by any means. The head strap fits nice. It's really a nice component if you are hardcore. And even if you do a lot of moving around, it doesn't lose it's grip.

As much as I wanted to leave a 4 or 5 star review, I couldn’t with this one. The Quality is pretty poor with the entire thing being almost made of Plastic. It isn’t a bad thing but I feel like if I were to hold it the wrong way, it would break. The one thing I do like about this is the nose filter (although that has its flaws to.) That is all I have to say, and really you get what you pay for but I do think this product needs a price adjustment. Other factors for me personally: Adjustability - 7/10 Comfort - 6/10 (poor leather) Battery life - 5/10 Fit - 8/10 Stability - 3/10 (Pictures above when I first got it)

I don't normally go out of my way to write reviews; however I tried several masks, and this one was a keeper. I tried the Stock lens (ouch on the face), and surprise surprise the adjusters broke. I tried the AMVR and it didn't fit the BoboVR S3 Pro very well also the padding was not great and if you tightened too much you would feel the plastic on the quest. Great fit for large heads. I use vr-rock lenses and I can adjust this to have max Field of view while not getting my eyelash oil on the lenses. I look at several other options for fans and watched lots of youtube videos. Even though this was more expensive, it looked cool and I was told it fit my head strap. Couldn't be happier! I have a larger head and the seal is perfect, no light bleed at all.. The nose part leaks but just tilt the Q3 down a notch and you cover all light. The adjuster is easy to adjust and very solid, doesn't feel like it will ever break! Of course, the fan. I can feel lots of cool air on my face on 1st speed. 2nd Speed lots more air. The fan noise isn't any louder than my bobovr s3 pro fan. When gaming you don't even hear it but you face will thank you! The KKCOBVR K3 with the BoBoVR keeps your face cool and comfortable, lenses from fogging, and look like a Star Wars Scout Trooper. Definitely give it a try before getting any other facial interrace, even without a fan!

Works well. Not for those that wear glasses less your frame is small. Not manufacturers fault. I bought to replace my amvr v3 as I wanted more cooling that my bobo S3 pro couldn’t provide with the amvr facial. It’s equally as comfortable. Only 3 adjustments as advertised but that’s ok. I can fit it with my glasses and so can my son. It’s a tight fit for me but works. The fan makes it worth the effort just go slow and careful. Combine it with the s3 pro fan and it is nice and comfortable and most importantly cool. Just hope the electronics last at least a year. 4 months in and already need my bobo s3 replaced with limited use.

This fits my Quest 3 perfectly and I believe does a good job of providing some airflow. I don't believe this will cool you down if you're doing strenuous exercise or activity but more that it provides a gentle breeze over your face. Fit and comfort is fairly easy. The pad is thick and comfortable. If you use the Quest for long periods of time, something like this starts to become a necessity or your face will just start sweating. The only downside that I have is that it tends to dry out my eyes, which is going to happen whenever there's air flow around my face. I think overall it's a good value and borderling necessity for heavy Quest users.

Je suis vraiment très contente de cette interface faciale (en tout cas pour le moment, je mettrai mon avis à jour si avec l'utilisation je change d'avis). J'avais testé la ventilation avec une sangle BoboVR, mais je ne sentais rien du tout et ça n'empêchait pas la formation de buée sur mes lentilles... Donc j'ai voulu testé ce modèle pour régler mon problème de buée/de chaleur dans le casque. Je suis quelqu'un qui transpire vraiment beaucoup et ce ventilateur fait vraiment son travail, on ressent une légère brise tout au long de notre session de jeu qui est très agréable et effectivement en enlevant le casque, j'ai vérifié aucune buée. Au niveau de la batterie, pour le moment j'ai pas de soucis, je le charge en même temps que le casque et je joue jusqu'à la décharge du casque. Je n'entend pas le bruit du ventilo en jeu, c'est vraiment pas hyper bruyant et le cache nez est pas inconfortable (en tout cas avec la forme de mon visage). En point négatif, j'ai remarqué en jeu que je voyais la couleur blanche à l'intérieur du casque dans les jeux lumineux, mais rien de très gênant, je n'y fais pas attention et dans les jeux sombres ou dans beat saber je ne le vois pas. Une dernière chose, je rejoins les autres commentaires sur le fait que le cuir fait transpirer. Pour remédier à ça, je porte un masque en tissu pour les yeux et comme ça c'est parfait : 0 sueur sur le casque, confortable. C'est la première fois que je fais des grosses sessions sans enlever le casque toutes les 20 minutes pour m'essuyer le visage (et le casque) avec cette interface + masque yeux. Vraiment, j'ai trouvé ce qui me convient, très contente. MAJ : Après plusieurs semaines d'utilisation, il est vrai que de temps en temps, le frais souffle sur mon front et me donne une sensation de cerveau congelé, mais il suffit de bouger un peu l'interface et ça part de suite. Sinon, je suis toujours aussi contente de ce produit et je n'ai aucun regret de l'avoir acheté, d'autant plus qu'il est à peine plus cher que des interfaces classiques. Ça vaut clairement son prix.

Das Interface ist mein 5ter Versuch das Originale Interface zu ersetzen. Und endlich, endlich ist es perfekt. Die Qualität des Interfaces ist sicher nicht auf dem Niveau von Razer, aber das muss es auch überhaupt nicht, denn das Wichtigste bei so einem Interface sind die Punkte Bequemlichkeit und Funktion/Funktionalität und da bietet dieses Interface einfach alles, was das VR-Gamerherz sich wünscht. Fangen wir an mit dem absolut weltklasse Aussehen. Wir reden hier über VR, also Nextgengaming, die, hoffen wir mal, Zukunft des Zockens. Das Teil sieht absolut cool aus und nutzt dabei einfachste Mittel. Der Ventilator ist kein riesiger Klopper, sondern flach und unauffällig, aber passend zum Questdesign. Der Knopf auf der Oberseite ist einfach zu erreichen und haptisch ok. Bissal unfutoristisch, dass das nicht Touch ist, aber was will man auch erwarten, drückt man beim Start und Ende der Session halt ein paar Mal. Der Luftstrom ist optimal, auch schon auf Stufe 1 und ein Beschlagen ist endlich nicht mehr möglich. Ich habe das Bobovr S3 und es beschlug trotzdem bei heftigen Sportspielen oder nach dem Baden (heißes Gesicht und Wasserdampf, ihr wisst schon...). Kühl aber nicht unangenehm, weltklasse! Das Lederband in dem Interface ist kein Monster, wie bei AVMR, sondern passt sich gut dem Gesicht an. Funktioniert also einwandfrei und schränkt die Sicht nicht ein. Das Verstellen ist toll. Ich vermute aber, dass breite Gesichter ein Problem bekommen könnten, das tangiert mich allerdings nicht. Das Teil für die Nase ist sinnvoll befestigt und fällt nicht alle paar Sekunden ab. Es ist auch nicht wabbelig, es ist einfach da und macht, was es soll. Ein kleiner Lichtstrom kommt rein, aber das ist nach 1 Sekunde direkt vergessen. Stört beim Gamen nicht. Das Anbringen ist einfach. Für Headstraps mit Kopfband muss man das mitgelieferte Zusatzband installieren, keine Ahnung wie, brauche ich nicht. Ich kann das hier nur jedem empfehlen.

Look great on Quest 3 and seems to do great wind :)

Très bien pour les jeux qui donnent chaud !

The KKCOBVR K3 Facial Interface Fan is a game-changer for my VR experience! The fan provides excellent ventilation, keeping my face cool and comfortable during long gaming sessions. The leather face pad is soft and fits perfectly, adding extra comfort. It’s easy to install, and the fan helps reduce fogging, making for a much smoother, more enjoyable VR experience. Highly recommend this for anyone who wants to improve comfort during VR use!