Haoge 62mm Square Metal Screw-in Mount Lens Hood Shade with Cap for 62mm Canon Nikon Sony Leica Leitz Carl Zeiss Voigtlander Nikkor Panasonic Fujifilm Olympus Lens and Other 62mm Filter Thread Lens

This 45mm lens didn’t come with hood and the manufacture stated couldn’t come up with a hood that works well. So, selecting a third party hood is a careful task. I found two and this is one of the two that works well with the lens and looks good on it. The metal material is thick, the matte finishing is free from defect and the fit is flawless. 45mm medium format lens is equivalent to 35mm on a full frame camera and this hood is fine with the angle. I also got a 77mm size and tried it on a 30mm lens (24mm in full frame) and it’s blocking some corner light. Rate this hood at 4 star instead of 5 due to two things, one is the very cheap plastic cover that’s difficult to take off and put on and that even cheaper packaging with Chinese only document.

The Haoge (LH-B62T) 62mm screw-on metal lens hood fits any lens with a 62mm filter thread. I purchased it for my Fujifilm XF 90mm f2 WR lens because the plastic hood that comes with the lens is much too large and impractical. I already own the Haoge 55mm lens hood which is fantastic, and the look, feel and build quality of this is just as nice. The hood is very well made and is a bit larger and a bit heavier than the 55mm version. It fits in perfectly with the beautiful ascetics of the Fujifilm X-system. In the attached photos you can see a side-by-side comparison with the 55mm hood on the left, and the 62mm hood on the right. Notice that the front is shaped slightly squared instead of circular. This hood comes with a slide-on lens cap that fits snuggly. I highly recommend it.

I bought this lens hood for my Nikon 50mm f/1.8S lens. It is mounts solid and succeeds in making the overall package smaller. I don't see vignetting in the image, though it is less effective than the OEM petal shaped hood for cutting flare/glare. Probably more suited for a 35mm lens.

This Haoge 62mm rectangular lens hood was purchased to use with the SLR Magic Amamophot 1.33/40 anamorphic adapter. The design of the hood includes a supplemental rear thread adjustment ring that allows one to firmly position the rectangular lens hood correctly to the plane of the camera's sensor - a factor that one doesn't have to contend with when purchasing a circular lens hood. Excellent quality of material and machining.

I needed a hood for my panasonic cam since my model lacked one and this fits perfectly helping cut down on glare during outdoor filming!

I liked the lens hoods but unfortunately I ordered the wrong size. Return was extremely easy and quick. It was a good experience

Doesn't fit 62mm thread

This is a nice alternative hood for my 90mm Fuji lens. Getting it screwed down into an exact horizontal position is tricky, but can be done.

its fine for what i need it for

画角35mmのレンズに使用したく、購入しました。問題ありません。なかなか、秀逸なデザインだと思います。　重さは約70gほど。　材質は金属、厚みもあり、堅固かつ重量感があります。　従って、以下二点には気を付けたいと思いました。その1　前玉が動くAFレンズには、それなりの負担がかかる。その2 　レンズに装着した状態で、誤ってぶつけた際は、衝撃がストレートにレンズに伝わる。　1については、とりあえずAFの作動を確かめれば良いかと思います。　勿論、MFレンズには関係ない問題です。　2については、カバンの中に入れている時は、フードを外して収納する、また野外撮影時も、事情が許せば、使用する時だけ装着した方が安心かもしれません。でも、ネジ込み式なので、ちょっと大変ですね。　いっそ、ゴム製フードを検討するのも有り、かと思います。　製品そのもののクオリティは、大変高いです。

HASSELBRAD XCD4/45Pへ装着。そもそもフード設定がないレンズですが、何やら物足りなさを感じてこちらを選びました。角型でかっこいいですが、少しの傾きも気になってしまいます。PLフィルター使用時は、クルクル回ってカッコ悪いので潔く外しています。金属製で質感は高いと思います。フードキャップもカチッとハマるので、ふとした拍子に落下という事も無さそうです。金額は高めですが製品としては良いと思います。

Panasonic VX2Mビデオカメラに取り付けました。金属製なので剛性が高くVX2Mにもしっかりと固定できます。製品自体に文句はありません。ただ、VX2Mとの組み合わせでは広角端（25,5mm）でわずかにケラレが発生します。30mm以上にズームすればケラレは回避できます。

ハッセルとフジのレンズどちらも愛用しています。