Jewelry Bracelet Glue for Elastic String Knot,2 Pcs Clear Clay Beads Glue for Bead Charms, Punctuation Beads, Jewelry Bracelet Making Supplies Kit for Plastic Bracelet Stretchy Cord (100g)

This glue is great for anything that needs to be super-glued, while still retaining some flexibility. The glue dries quickly, bonds very well to rubber and plastic, and does not crack or flake off under pressure. It also comes with little applicators that help get the glue into very tight or small spaces.

This glue took me by suprise. I was concerned since I was adhering two large 3d printed (PLA) parts together, that some glue wouldn't work well.Initially I applied slight sanding to both faces and put the glue on and out the faces together. Within about 3 minutes they held well together to where I couldn't pull them apart. After curing for 24 hours it held really well! After this learning, I tried to adhere two faces with no sanding, the pieces adhered in a matter of seconds (which kinda messed me up as I didnt align the pieces perfectly). I even had a small surface area where I bonded two surfaces slightly, however upon testing I was able to pick piece up from one end and it support the whole objects weight (in the photo the antenna piece). Id wear gloves and a mask. Even though the nozzle makes it easy to apply little amounts of glue, if you put too much it gets stuck to your hands and requires dawn soap for like 15 minutes and lots of scrubbing to come off. The mask is recommend if youre sensitive to smells as it has a strong smell before its cured. Overall Id recommend the glue for 3d printed projects as its very strong and seems to bond well with PLA. TLDR: Glue works great for 3d prints. Use gloves, and work in a ventilated surface to avoid the smell.

What I really like about this glue is that it is not runny, more of a gel so when applying to small areas it doesn’t drip. This makes for a nice application for my 3D prints. It also does not leave any white residue like your super glue tends to. Once it dries it is clear and glossy. You really don’t need a lot. I make sure to do any clean up if required with a q-tip. The long tip attachment helps me get into very small areas/spaces. It’s very easy to use and once it fully dries it is a very strong hold. I hold my pieces together for a few seconds to ensure a good adhesion. There’s no strong odor which I appreciate as well since I’m easily prone to headaches. I leave the cap on the tip and place the cover on top, after a while there’s a little build up on the tip so I just trim it off.

I used the Meuvcol Super Glue for Plastic on several small plastic projects. It created a very strong bond and held pieces together reliably, making it effective for heavy-duty plastic repairs. The main downside is the tip—it dries out fairly quickly, which can make application messy and sometimes hard to control. It’s also very easy to get glue on your fingers, so caution is needed during use. Overall, it’s a strong and reliable plastic adhesive, but the packaging and tip design could be improved for cleaner application.

Let's be honest. Its just regular superglue. That being said it works great on legos and tiny little nozzle is awesome. My hubby and I managed to put together an entire kit without gluing our fingers together or making any mess! Just like (name brand) superglue it is super strong and a little tiny dot is all you need.

So I was wiping a Baby Einstein Sea Dreams soother to pass down from the 4 yr old grandchild to the new baby. It had been packed away since he was like 2 1/2, and when I went to wipe it, I discovered that when it was being used by the first grandson that he must have spilt apple juice from his sippy cup down inside of it. It still worked fine but I wanted to Clean it. So I took it apart and not realizing it, I accidentally split the small, skinny silicone whitish looking o-ring inside. Well I knew that it was going to be difficult to replace. So I searched for a silicone glue. And this is the one that I found!! Surprisingly I didn’t have to hold it together for too long once I put the glue on it. Then, I allowed it to cure for 24 hrs. I thought it might be delicate after it had cured, but it wasn’t! Held up well! In the pic, you can see how, I then hooked it back on the toy and on the wheel. I circled it in pic

This glue is fantastic and it really works it is easy to use. Container it came in is well made with a thin nozzle for easy application of the glue. Pride was affordable and you get 2 bottles of glue. Great. for repairs on a TPE sex doll. Has no smell.

Strong and super durable!! Dries fast!!

Ich habe den Kleber für die Reifenmontage eines RC Autos verwendet. Ich kann zwar noch keinen Langzeitbericht verfassen, aber die ersten Fahrten haben die Reifen gut auf der Felge gehalten. Auch das Preis Leistungsverhältnis erscheint mir sehr fair.

Me writing a review about Superglue... Who would have thought it! But it's so good as a complete package i had to let the World know. I used this to stick rubber 1/8 scale tyres to plastic rims... Gives you just enough leed time to adjust position before setting hard... Comes with a few long attachment spouts that taper down to almost zero which allows applying just the right amount where it needs to be... Any excess can be removed with paper kitchen roll within a few seconds without issue so makes the job clean and easy... The tyre will rip before the glue let's go so it's adhesion quality is a good as it gets and way above almost all other brands i have used.. Two 50mlts bottles and 5 tapered spouts for under £10 what's not to like... Used under a quarter of one bottle to run two beads around 16 4.5inch dia wheels.... Great value too.

This product is no Joke .. It sets fast and hold strong as F_ _ _ . Would definitely buy again in the future.

The glue does the job well and I love that it comes with the precision application nozzles dries fairly quickly when applied in little dabs. It's ultimately great value for the cost. Just a couple negatives that keep me from giving it 5 stars. The precision nozzles work great, for a while, but are not durable. If you're working on a project for a while, or if you step away for 10-15 mins, the nozzles have a bit of wicking effect and glue collects and hardens at the tip. It's very easy to peel from the wider sections, but the end is so thin and delicate that pulling with any force usually results in pulling of a piece of the tip or just having to snip a bit off. If you have the patience, you could swap nozzles and soak the one you're using in acetone, but you'd run out of nozzles to use pretty quickly. At this rate, I don't think the nozzles will last long - I'm 3/4 finished building a model and half the nozzle is gone. The only other point is that the glue is a bit thicker and tackier than I expected. Not a huge issue for the most part, but sometimes causes issues when you want to hold two pieces in place and have the glue seap into the crack.

Unglaublich Klebekraft. Was hat man schon alles mit irgendwelchen Klebern versucht zu kleben. Ob Gummi am Autoreifen (wofür ich es gekauft hatte) oder später für Schuhsohlen. Innerhalb von Sekunden bombenfest. Absolute Kaufempfehlung!