BIQU CryoGrip Pro Glacier Panda Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Double-Sided Fine Textured Spring Steel Sheet, Firm Adhesion, 257x257mm, 1 Piece

I have a Prusa Core One and a MK3.5. Us the on the Core ONe to do oversized prints and it works great. Adhesion is very very good, almost better than you'd want, but you won't have to worry about a print popping off the build plate after that first layer. TIP: do yourself a favor while you're waiting to get this steel sheet delivered. Go to an auto parts store (Autozone for me) and get a plastic scraper that has the changeable plastic "razor blades" in it. Mine is grey with orange blades and my older one is blue with orange blades. They'll be in the aisle with the sealants and adhesives and fasteners or just get it on Amazon. Search for "plastic razor blade scraper" and there are a blue million hits.

Using it most of the time now. Works great, smooth and has great "sticking" properties. Worth the investment, especially if you need a smooth plate.

The build plate came sealed and perfectly protected, no damage at all. I’m using it with my Bambu Lab P1S, and I’ve since swapped it in place of the standard textured PEI plate. If your printer doesn’t have the QR code reader, just remember to manually adjust your build plate settings—it makes a big difference in print quality and adhesion. What I Like: Adhesion is excellent, easily better than the original PEI plate. Prints stay firmly in place during runs, even larger or more intricate ones. The surface feels durable and high-quality, and it’s clear this plate was built for reliability. It’s been great for detailed or tall prints where strong first-layer grip really matters. What I Don’t Like: That same strong adhesion can be a double-edged sword—it makes removing prints a bit tougher. You also can’t really print rafts or very flat items directly on this plate because they’ll stick too firmly. It just takes some tuning to find the right balance in your print settings. Would I Recommend It: Yes, for anyone looking for stronger adhesion and more consistent prints than the stock plate provides. Just be prepared to tweak your settings and handle removal carefully. Once you get it dialed in, it’s a solid upgrade.

I’m really impressed with this plate on my A1 Mini. Adhesion is excellent, and I haven’t had a single print fail due to bed issues since switching to it. The surface grips well, especially with PETG — almost too well at times. For PETG, I usually need to warm the bed slightly after the print finishes to help it release cleanly. The plate stays flat, heats evenly, and gives consistent results across multiple materials. For the price and performance, it’s one of the best upgrades I’ve made to the A1 Mini.

This was the solution to all my problems!! I got my kids a Flashforge Adventurer 5M for Christmas and prints kept coming off the build plate no matter what I did (yes I tried adhesive glue, hairspray, cleaning the plate). After realizing the stock plate was trash, google told me to give this one a try. It came in this morning and I am AMAZED!! I was able to print EVERYTHING that failed on my previous build plate, whit this one with zero issues! Prints adhere to the plate in a manner that ensures it won’t come off during the print, but releases with a little effort. For what my word and experience with a trash build plate is worth, this one is worth every penny!

I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain. When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course). According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints. This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates. I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.

Excellent Build plate, Great balance between plate adhesion as well as removability. I exclusively use the crygrop build plate now because I also enjoy the satin surface finish it gives my prints. I ordered 8 BIQU plates from them, I did have to have 2 of them replaced as the quality of them was not up to par and the prints would not stick despite through cleaning with soap and water. The replacement that was sent was great and worked as advertized.

プレートへの食いつきが抜群でプリントミスがほぼゼロになりました 逆に食いつき過ぎて剥がすのが大変ですw

youtube等で言われている通り、剥がれに強いというか強すぎる！くらいです。 あまり大胆な設定変更はしていませんが接着力の強さから安心していろいろと試すことができます。 1枚は持っておいたほうが良いプレートだと思います。

とってもよく着きます。剥がすのが大変なくらいです。小さいものは剥がしにくいです。大きなものであれば安心してプリントできます。40°でも充分です。

PETGにとても良いです。 きちんとくっつき ちゃんと冷やせば剥がれる。 問題は、公式のプレートの方が安い。 品質はよいですが、公式ほどでもなく高い。 本末転倒。

とても良く定着します サポートの一層目や、ブリムは爪で引っ掻いて取るのが困難なくらいです 接着面はスムースプレートに比べると若干ザラっとしますが、テクスチャープレートのような模様が出ることはありませんでした