BlueDevil Radiator Flush – 32 oz | Deep Cleaning Coolant System Flush | Removes Rust, Scale & Grime

This is a good product, I drove my Jeep for about 90mins after installing this flush, follow the instructions, my engine was very clean!

This worked better than I expected. My old engine had sat for years with water in the cooling system and there was a lot of rust. One treatment with this product flushed it completely clean.

If you have an engine that's been sitting a while make sure to put a filter of some sort on the outlet hose before the radiator. I used this stuff and clogged my radiator it did such a good job cleaning junk out if the block. The product works amazing and does exactly what it says.

It helped me with one of my cars but not a magic. In another case it not helped with firmly leaning system. But usable.

Bought this for an old diesel farm tractor. It seems to have fixed the issue as has been over a year now. Pleased with the product. Will try again if the need ever arises.

I have a radiator that before I bought the vehicle I think it was ran with just straight water all the time. I was recommended this and tried it. actually ran the vehicle for almost 2 hours let it cool down and drained it. The water was really nasty. Then I used the hose to run water through until it came out clear. filled with coolant and that was my mistake. after using a radiator flush I guess its best to refill with distilled water and run that for 10-15 mins and drain again. You want to keep draining and filling until your drained water is more or less clear. Then put in your coolant and good to go. also if your changing your thermostat take it out before doing this so water is just continually going through the system. Don't put it back in until your ready to refill for the last time with coolant.

I have a Jeep TJ that the previous owner mixed the wrong radiator fluid. It looked like rusty mud. I throughly flushed the radiator with hose water to get as much sediment out. I let that all drain out and closed the petcock. I poured the radiator cleaner in first then added my water until the system was full. I then ran the vehicle for an hour around town. Let the vehicle cool and drained the fluid. It took me about 8-10 of these flushes to get the system clean. Don’t not leave this cleaner in for more than 4 hours. I also did my flush in the summer. Do not use water to flush the system in the winter months. I can’t say that the cleaner made a difference. However it didn’t hurt. It’s important to keep your cooling system clean. Like I said I had to do 8-10 flushes on my system but my cooling system was really bad. The vehicle runs very cool now and the heater works really well. I hope this helps.

I followed instructions but did a hybrid approach where the car idled for 20 min and then I drove it for 20 min. Let the car cool some and drained. Only 4 qt of the 6.6qt came out and it was pretty dirty. After the clear plastic water container sat over night you could all the blackish sediment at the bottom. I filled with distilled water , idled the car until thermostat opened and drained again. Repeated until the water appeared more clear. Took some time but I know the system is clean and the flush is fully out.

ممتاز وينظف

After using this product car got worse and had to get a radiator flush first from mechanic then it still needed a new rad for car $1800 later. Took weeks to get repaired. I wouldn't buy this and suggest going to straight to the mechanic before using this product.