40065 Wheel Kit with Folding Handle and Never Flat Tires, for 2800-4750-Watt Generators, Black

The wheels went on perfectly. The rubber supports took a minute to place, but went on without any issues. For some reason I misread the picture and thought the supports were small wheels to help balance the generator. Doh! The handle bar was the main quest. The picture provided "works" but it is a closeup so you can't tell what is what. (The picture for the rubber supports is also a closeup so trying to figure out the exact "where" takes time.) I put it on the way I thought it would go and nope. Then I reversed it, but then you'd have water getting in the brace. Nope. Saw a great YouTube video that set me on the correct path for the handlebar. As you can tell, this was not my first thought on how it goes on. The brace goes sideways facing the generator. It works and it's good. I haven't used it too much, just to push it around to test it. When we need a generator, this will be a great help in getting around. This was for a 4000 / 3500 watts portable generator. Model # 46596. For those of you who complain that it doesn't fit and you do not have a Champion generator, shame on you for posting 1 star reviews when it says right up front it is for Champion generators only.

Easy to install. Took me about 30 minutes. It fit my Champion 100216 with no troubles. The instructions don't mention having to remove the rubber vibration mount from the generator to mount the new support leg but other reviewer's already mentioned that you have to remove the old rubber vibration mount underneath before installing the new support, so thanks for the heads up! The instructions could have used better pictures, especially for mounting the handle. It took me a few tries to get the handle mounted correctly so it lays down in front of the generator to lift it up and let you pull it around easily. I also had mine full of gas & oil as we've had power outages just in the last few days, so I just used a floor jack to hold the generator up a couple of inches and mounted the support leg by slipping it onto the bottom without flipping it over or tipping it up on it's side with no problems. I used to have the generator on a piece of plywood with 4 little coaster wheels on it, but it was awkward at best to move due to its weight and size. It would always catch one of the little wheels on any uneven surface when I'd move it around. Now it's really easy to move with just it's two wheels on back. It is definitely worth the money and a little bit of time to install.

Works exactly as you would expect. only call out for me is with the wheels installed, just barely too tall for the bed cover on my F150. Solution, I take the wheels of when we go camping until we get to the campsite.

- Looking at it after the fact I guess this kit is specifically for a Champion Power generator and not universal. I did leave it at 4 stars because it really should have came the 20 cents worth of washers I mention below This is a universal kit so I didn't expect it to straight bolt onto my generator which is Powerland 7.5HP 4000W model. I was able to use a couple existing holes but ended up drilling most of the ones to mount the axle and front stand. It didn't take anything fancy, typical cordless drill, unibit and a center punch. Worth noting the brackets on the axle are bolted onto the axle so it can't be moved side to side. I took away a star because the kit does not come with any lock washers. Anyone who has turned wrenches will tell you the vibration from the generator is going to shake loose anything bolted on that's not locked down. So before you even start this project make sure to get at least 8 lock washers and some red thread locker. I also suggest getting two flat/fender washers that can fit inside the rubber feet on the stand. I noted when I was tightening the bolts it was starting to pull the head of the bolts through the mount. Fortunately for me I had the spare washers laying around from other projects but that means I can't tell you exactly what size to buy. Just take one of the bolt and a mount with you and match it up. Any of the usual suspects will have the hardware. The handle is the other weak part of this kit for me. It clamps around the frame of the generator and in my case it never gets tight enough to not slip even with the bolts as tight as they will go. Being universal I didn't mark it down for this. In my case the part of my generator that it attaches to is just too small and round, I haven't came up with an exact solution to this yet but it's a solvable problem.

Ordered for generator. Installed easily and worked perfectly.

The wheels are easy to install, as well as the other items that come with the kit. This kit makes it so much easier to move the generator around!

Se compraron para instalar en un generador Champion 4375 W y le quedaron perfectas lo que facilita moverlo sin gran esfuerzo. Se ven sólidas y buena calidad.

Muy buen accesorio , funciona muy bien , costo colocar un poco las gomas de base . Pero fijan bien

Great purchase for my Champion generator that was purchased without wheels, conversion kit worked well other than 2 minor issues. 1. Came with a second handle that I could not have installed as I was not able to locate where it goes. 2. Bracket/support legs on the handle side was only able to be installed using one screw as the other screw hole was located under generator unit on frame. All in all, it works well!

The handle doesn't feel as secure as it could at the connection point on the frame....otherwise, it is a good product and it really does help when moving my very heavy generator... and everything fit correctly.( Champion 4000w camo edition)