Dynofit 12x1.5 Extended Open End Lug Nuts for Thicker Wheel Spacers, 12mmx1.5 ET Wheel Lug Nuts for aftermarket Aluminum Rim,7mm Extend Shank Tuner Nut Compatible With Toyota Tacoma Tundra 6 Lug Wheel

If you are putting aftermarket wheels on your Toyota these are what you need. Lugs that came with wheels only got 6 or 7 full turns. These get 12 turns. Much safer!

Very happy with the quality and how well they fit.

This is a great solution to getting full stud contact when using wheel spacers on a Toyota.

These are quality made, chrome-plated ET lug nuts. They feel hefty enough and thread onto the wheel studs tightly. Their chrome plating held up to being torqued down and they look like they would last.They bottom of the nut throats down to about 39/64" (.61) in diameter or about 15mm. The extended sleeve is about 1/4" deep as well. This means spacers with wheel stud openings narrower than 39/64" in size or shallower that 1/4" will not work with these. I have a set of Mishimoto (Borne Offroad) 2" spacers that were too narrow to accept these nuts. It's worth checking the diameter and depth of the opening on wheel spacers or wheels to see if these will work with them.

Went on like a charm and gave us that extra threading on the lug that we were looking for.

Fit great on my truck

I needed them to place 1.5 inch spacers on my 2017 Tacoma and they did the job. I re-tightened them after 500 miles and had 4 out of 30 that started to strip but not sure if that was because of my hex nut or a defective lug nut.

These worked well with my wheel spacers to make sure they are tight and stay tight. Haven’t had a problem yet after 5000 miles and numerous removals and installs