Kingwin SSD/SATA to IDE Bridge Board Adapter Easily Converts All SATA Devices to IDE Compatible with 2.5" 3.5" HDD, SATA I/II/III Hard Drives

Kingwin SSD/SATA to IDE Bridge Board Adapter Easily Converts All SATA Devices to IDE Compatible with 2.5" 3.5" HDD, SATA I/II/III Hard Drives

Q: Does this adapter support the old 40 pin 40 wire cable? Or does it only work with the newer 40 pin 80 wire cables?

It will work with either cable, however your speeds may be limited; the original 40 pin cable was good to 33 MB/s and the 80-pin cable which reduces cross-talk allowed for speeds up to 133 MB/s. Its always better to use the 80 pin cable which reduces cross-talk and improves performance. SATA starts at 150 MB/s and using the 40 pin cable will reduce the transfer speeds a lot

Q: I have an old IDE system with no SATA on the motherboard - I need to replace the hd with a ssd sata drive - can i use this adapter?

I think it should, so long as your sata drive has the right wafer like connections on one side, it should fit, but you might find trouble mounting your hard drive in the normal place, because it fits tight to the drive and keeps the hard drive from sitting right in the tray.

Q: Anyone use this to mod ps2?

The spacing on the connections of the ps2 are a bit different,but if you can connect from ps2 to the bridge it will work. Good luck.

Q: Is it possible to get this into slave mode? The connection on there now that I thought would allow to switch it to slave does something else.

I don't know about configuring the bridge for slave mode, but I would try setting the jumpers on the IDE drive to slave mode and connecting it up.

4.2/5

معرّف المنتج: 744390061

معاملة آمنة

التفاصيل

Hardware Interface
IDE
Brand
Kingwin
Memory Storage Capacity
4 TB
Compatible Devices
Laptop
Max Number of Supported Devices
1

⚡3.0 Gbps max transfer speed

💡Dual LED status indicators

🔄Universal SATA to IDE compatibility

يُشترى معًا بشكل متكرر

Kingwin SSD SATA to IDE Bridge Board Adapter – Convert SATA Devices to IDE, Supports 2.5” & 3.5” HDD/SSD, Compatible with SATA I/II/III Hard Drives, Easy Plug & Play Installation

24" 40-Pin 80-Wire Ultra ATA 2-Drive Ribbon Cable, Manhattan 332781, Model:, Electronic Store

StarTech.com LP4 to 2X LP4 Power Y Splitter Cable M/F - LP4 Splitter - Molex Y Splitter - Molex Splitter (PYO2L)

الوصف

🔗 Bridge the gap, boost your legacy tech!

DUAL LED INDICATORS - Stay informed at a glance with power and HDD activity lights for real-time status monitoring.
PLUG AND PLAY SIMPLICITY - No drivers or batteries needed—just connect and power up to unlock instant SATA-IDE synergy.
COMPACT LIGHTWEIGHT DESIGN - Slim 14x8.5cm footprint and featherlight 20g weight fit perfectly into any setup without bulk.
BLAZING FAST 3 0 GBPS TRANSFER - Experience high-speed data flow that keeps your workflow smooth and efficient.
SEAMLESS SATA TO IDE CONVERSION - Effortlessly bridge legacy IDE systems with modern SATA drives for ultimate compatibility.

The Kingwin ADP-06 is a compact SATA to IDE bridge adapter that enables seamless connection of SATA I/II/III hard drives to IDE interfaces. Supporting data transfer rates up to 3.0Gbps and featuring dual LED indicators for power and drive activity, it offers a plug-and-play solution to extend the life of older systems with modern storage technology.

المواصفات

Data Transfer Rate	3 Gigabits Per Second
Global Trade Identification Number	00812348010265
Manufacturer	KingWin
UPC	172302685060 168141457609 809385141625 808111635575 320127528370 141291036061 812348010265 809185291902 132018243695
Batteries Included	No
Batteries Required	No
Item Model Number	ADP-06
Model Year	2011
Special Features	SATA Bridge, IDE SATA Converter, SATA Converter, ID Bridge, Kingwin ADP-06
Connectivity Technology	SATA
Product Dimensions	14 x 8.48 x 2.49 cm; 20 g

لديك سؤال؟ انظر ماذا طلب الآخرون

Does this adapter support the old 40 pin 40 wire cable? Or does it only work with the newer 40 pin 80 wire cables?

I have an old IDE system with no SATA on the motherboard - I need to replace the hd with a ssd sata drive - can i use this adapter?

Anyone use this to mod ps2?

Is it possible to get this into slave mode? The connection on there now that I thought would allow to switch it to slave does something else.

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

عمران ف.

متجر موثوق للغاية ومنتجات أصلية. سأشتري بالتأكيد مرة أخرى!

منذ أسبوعين

نهى س.

اتصال ممتاز طوال عملية الطلب. المنتج مثالي.

منذ أسبوعين

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

خدمة ملايين المتسوقين في أكثر من 100 دولة

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

يوسف أ.

تجربة رائعة بشكل عام. سأوصي بها للأصدقاء والعائلة.

منذ شهر

نهى س.

اتصال ممتاز طوال عملية الطلب. المنتج مثالي.

منذ أسبوعين

عرض جميع مراجعات ترست بايلوت