MaxAuto 2 Pcs 16x6.50-8 Lawn Mower Tire for Garden Tractors Riding Mowers, 4PR, Tubeless

I needed size 24x10.5-12 to replace the original rear tires on my Cub Cadet GT3200 tractor. The old tires were the original tires that came on the tractor when it was new 19 years ago, and they even have the Cub Cadet brand on them (see photo) You can't get these tires anymore. Then after lots of searching I realized that the whole tire industry has discontinued the size of 24x10.50-12. So I decided to try the size of 24x12-12, which is 1.5" wider tread and the same diameter.BTW in the size numbers, the first number is the OD of the tire, the second number is the tread width and the third number is the rim diameter. The wider tires fit on the original rim OK. So always remember you can go a little wider on the same rim as long as the wider tire still fits in the tractor wheel opening without hitting anything.The Max Auto tires were a few bucks cheaper for a pair than another well known brand. The quality of the Max Auto tire looks fine to me, nice tread and nice sturdy looking tires overall.I am happy to report that the tires I purchased came stacked in a box that fit them naturally. I have seen reviews of other tires where customers showed photos of the tires all scrunched with binding into an unnatural shape in order to make them fit into a smaller shipping box. Then these customers told of how the tires were so distorted in shape from that abusive packaging that they were very difficult to mount.The Max Auto tires mounted easily for me with the tools you see in the photos. I have couple of tire irons, hammer, and the trusty el cheapo Harbor Freight tire machine, which is nice to have but not really needed. I could have mounted them with just the tire irons and hammer alone. The one part of the job that the HF tire machine can make a lot easier for you is breaking the beads on the dismount of the old tires, because this part of the job can be tough without the right tools and technique. The HF machine is cheap and handy so you might want to get something like that if you change tires now & then. You don't really need to bolt the machine to a floor either. I use it standing free with one of my feet on the base to steady it, and the bead breaking operation has the weight of the wheel lying on the base holding it steady while you work so that's not really an issue there. Like I said, the leverage of the HF tool makes the bead breaking go quick and easy.Also used is Eastwood Rust Encapsulator Platinum to coat the rims. (the silver paint product). I use this product a lot. It is very important to deal with any rust on the steel rims before mounting the tubeless tires if you don't want rim leaks down the road. I totally stripped all the old paint and rust off of the rims with rotary wire brush tools, solvent cleaned the metal and applied the Eastwood product to the entire surface of the rim inside and out, paying close attention to the bead seal surface. I did this with a brush because I'm not fussy about the looks. If you are fussy it can be thinned and applied by spray. The coating gives a very smooth hard rust resistant surface to make those beads get a good seal.Then I applied LPS 3 to the tire beads and used it as a lube to install new valves in the rims as well. This product acts as a lube, enhances the seal and helps prevent rust.Seating the beads went easy on one tire but the other one needed the old starting fluid explosion trick. See YouTube for more info on this, lol. This sort of thing can happen at random when mounting any tire, so it has nothing to do with the tire quality.These tires have a max operating pressure rated at 20 psi and the instructions tell you to go up to 36 psi to seat the beads, so I did that. On my tractor which weighs about 500 lbs (plus another 200 lbs with me on it) the tires do not need to be inflated at 20 psi, that is way too much. I air them down to about 8 or 9 psi and that makes the tread contact patch just right without bulging the sidewalls at all. I mowed a couple times with them and they work just fine at that pressure, and the beads are holding good seal.The tires look good on the tractor and seem to be performing well. Overall I say these are good tires, I think you'll like them too.

Fast shipping and good price. Tires look nice with deep thread. Haven't put them on yet but appear to be good quality and value.

These tires are great for my 20 yr old John Deere mower. The old tires were hard and stiff. I left these new tires in the sun and used dawn. I still struggled until got a harbor freight small tire mounting kit. It took minutes per tire and they both set the bead easily. I have a multitude of small tires with all of my equipment to justify the $60 for the mounting system. Otherwise you might want to go to the tire shop if you dont have good tire spoons. These tires look great and dont slide on my slightly slopes yard. Highly recommend.

Love these tires!My 1991 John Deere 445 rear wheels were finally at the point of slow leaking (I ‘spose 34 years hard use wasn’t too bad… maybe if I stored the tractor out of the weather…). Theses new tires are just what the doctor ordered and far less expensive than JD OEMs. I fought with mounting one of the two with a tire iron but the gave up on the second and had Costco do it for $20.

My only issue was initially one tire was the wrong size size. That's the only reason for the 4 rating. Once my return was logged they got me the correct size tire quickly. Considering their price for 2 tires was the lowest price I found locally for1 tire I'm satisfied. The tires look good, hold air great and have good tread.

So far so good. These fit my John Deere 7G18 walk behind mower.

Bought these for a small yard trailer that I pull behind the mowers. Other than the wrestling match I had putting then on the rims, (use dish soap) they have been great. Great value for the money!

Tires are great, but don’t expire get them mounted by yourself. After struggling for over an hour to get one tire mounted I threw everything in the back of my truck and drove to the local tire shop. $35 to mount the two tires and was well worth it.