VEVOR Bolt Extractor Kit, 65 Pieces Easy Out Screw Extractor Set, Lug Nut Removal Tool with Left Hand Drill Bit Set for Removing Damaged, Frozen, Broken, Rusted, Rounded-Off Bolts, Nuts & Screws

working good and appreciate the half sizes

This is a great tool I had a threaded pipe that broke off on my sand filter and I used the tool and it came out perfect

I took my VW in to have the differential lube changed and was told that the Allen drive plug was too rusty and they couldn't do the job. When I checked the plug, it was evident that they tried to remove it and stripped the Allen drive socket in the plug. I bought the Vevor Screw Extractor set and found the correct size. I tapped the extractor into the stripped plug then connected the ratchet, applied some force and Presto the plug began to unscrew! I checked the screw extractor afterwards and it had no sign of wear. If you need to remove a stubborn fastener, I would give these a try!

Good product.

Way better option than other kits that only go down to 5/16 and I needed things smaller than 1/4. Solved the problem right away, highly recommended.

I have not used this yet but seems to be of good quality and affordable

Arrived on time/ no damage and finally got that bold out that was stuck in my engine! Ty

Vevor is up and coming. Has the infamous.15 mm Update: Needed to use this on getting out bolts from an oil pan. Because there are so many sizes I was able to simply go through each size until it grabbed the bolt head.

Quality item , A+++

après essai sur écrou bien endommagé de diamètre 14 l extracteur de cette taille a fait son efficacité sans forcer.. Très bon materiel

Great Quality as usual when i buy Vevor stuff! Works great! Good quality! Great box, fast shipping! 2 days!

In fact, I didn't use it in my project, as there weren't enough room behind the throttle body on the engine. I think I may need to use it in future projects, so I keep it. It seems quite good in both quality and style. If you don't have a set in your toolbox, I strongly suggest you to get one.

Après de multiples recherches, j'ai essayé de trouver le meilleur extracteur pour boulons carrés de petites tailles. - J'ai eu un souci pour tourner (fermer/ouvrir) un robinet de radiateur, la clé d'origine étant perdue, et les différents clés que j'ai utilisé ne marchant pas. - J'ai donc décidé d'utiliser un extracteur en scellant le tout (j'ai mis de la pate epoxy dans le boulon pour que les parties non carrés tiennent). - Le tout est donc scellé et l'ouverture a été facile. Ps: Mon erreur de débutant a été je pense de ne pas bien mettre de dégripant avant de tourner, mais c'était déjà trop tard, d'ou l'utilisation de cet extracteur.