Lepro LED Strip Light White, 16.4ft Dimmable Vanity Lights, 6000K Super Bright LED Tape Lights, 300 LEDs 2835, Strong 3M Adhesive, Suitable for Home, Kitchen, Under Cabinet, Bedroom, Daylight White

I connected this to a Sonoff switch, which if operated via my Alexa. Sonoff Wifi Switch Wireless Remote Control Electrical for Household Appliances, Compatible with Alexa DIY Your Home Via iPhone Android App (Sonoff Dlu) The light is very bright. I installed it in my kitchen as under counter light - it is very good. The Sonoff is a binary - it is either on or off, there are other switches available to give you brightness control - and you don't have to use any wifi connector! You can simply plug it in, and unplug when done. This is excellent under counter lighting, and I will also be using it to light some of the closets around the house, and some of my garage shelving. The white is much brighter than the white option on a color roll. The light as a sticky back to it which will stick to almost anything. Making installation a breeze. For the price, this is amazing, and so many options. Using an Arduino I am making one for the bathroom that will come on when it senses movement, then switch off after 10 minutes. The lights will go under the vanity, and will light the bathroom enough for a 3 AM visit, without leaving you blinded by the lights! You can cut the tape at any point. You can then use jumpers to place the next run around a corner or over a gap. With basic skills, you can extend those wires as long as you want them. You can also start another run with a 12v adaptor. Again, some basic electrical skills needed for that.

This is the 2nd one my wife has bought within the 4 years we been together. And it's only because she cut the first one on accident and the alligator clips to join them together again were always making it flicker. This product and lights are definitely worth the buy and would recommend them to anyone. She has them up in our kitchen and it makes you feel at home. Definitely bright enough & they come with a dimmable controller to make them as bright as you please.

Excellent product I made a pigtail and it worked perfectly on my Airstream travel trailer and OEM dimmer everything worked great so far much brighter than OEM

Bought this as a Lightning Deal for $12. I'd seen these for a while but finally decided this was a good option to try. It arrived very quickly. Usually these gadgets get tossed aside and forgotten, but I decided to try it out. I plugged the power adapter into a switched wall outlet, ran the cord up the wall, and used that as my starting point for sticking up the strip. I wanted to go without the dimmer but I found I needed it in order to reach even my relatively-low ceiling. Even then I had to have a couple inches of the lighted portion hanging down. That would probably be the one complaint I have about this product. I used a cable clamp to provide some strain relief in the hope that it will prevent the strip from being pulled down by the cord tension. I used the full length, uncut. Be careful pulling the paper backing away from the strip; if you peel it incorrectly it will take the adhesive tape with it, then it won;t stick well at all. I recognized this and was able to correct it before getting far. I peeled away a section at a time, about 1~2 ft, working across the wall. It's sticky enough that I didn't need to clean (i.e., alcohol-prep) the surface, but it wouldn't be a bad idea to brush away cobwebs or dust. Once it's up,m it seems quite strongly attached. I've only had it up for an hour or so, so time will tell. I wish now I'd gotten a longer one so I could have gone all the way across the room, but this strip covers the majority of it. I'm quite impressed with the brightness overall; it seems to light up the room better than the two wall sconces. I have them actually facing down, so it doesn't project across the room as much as it could. The photos make it seem brighter and warmer than it actually is, but to my eye I can tell a nice difference. It won't completely light up a room on its own, but it does at least provide substantial fill light. I only wish I'd paid more attention to the temperature color. It is 6500K which comes out slightly bluish, and maybe not as bright as if it had been about 4000K-5000K. But ya get what ya get. Definitely getting more of these for some other rooms. But it's limited in that it needs to be near an outlet. I would love to hardwire it to a 120V light switch but that's obviously not feasible. UPDATE 11-Jul: I've had these up for over a week and I still like them. They maybe don't seem as bright as my initial impression, but still a nice fill light. What I do like most is that they are still holding strongly to my ceiling, even in hot & humid conditions. These have genuine 3M VHB thick-film adhesive. I'd bought a couple other strip rolls from other sellers, thinking they would be the same, but they use "ME" adhesive (with a logo meant to look like the "3M" logo) which is thinner and not nearly as sticky. So I'm buying at least another roll or two of the LE product, for when I want to stick the strip facing down or vertically. Be sure on these LE strip to only peel off the paper backing, NOT the adhesive tape itself. I also have been doing more research on the connection methods for joining multiple strips, splicing, tee-joints and corner joints, all without soldering (because I can't solder to save my life). So when I get more of the LE rolls I'm planning on extending this light almost all the way around my den. I also learned a bit about LED drivers which can be hard-wired to 120 VAC and provide a 12V DC current in different wattages. I'm thinking I may take down one one of the wall sconces, hardwire a driver, tuck it behind a wall, run the output wire up to the ceiling, and thus have a cleaner installation, dimmable lighting, and sufficient wattage for the extended length. UPDATE: I decided to downgrade 1 star as I find this strip has a flimsy backing, which makes it more difficult to work with when connecting strips together with the various push-and-snap connectors. (I find the other brand to be more rigid and easier to push in.)

I really like these LED strip lights. They were easy to set up, look really good, and work great. Good quality for the price. I’m happy with my purchase.

This package deal is completely worth the price! You get the LED lights, power supply, an extra power connector, a couple of strip-to-strip connectors, and the remote control cord and remote. All work perfectly so far, and I am quite happy with the functions of the remote. I purchased an LE brand warm tungsten LED strip to use in a craft project, and used the power supply and remote from this package to light them up. I decided to go with tungsten, instead of the daylight LEDs included in this package, just because it suited my project better. The daylight LEDs in this pack look great, and are quite bright...so no problem with them. The adhesive on the back of the light strip seems to be perfect. I have had other strips fall off, because the adhesive isn't the best, but so far so good with these! The remote has several buttons that serve different functions: It has 100%, 50% and 25% brightness buttons, which quickly sets the brightness of the connected LEDs to that percentage. It has Brightness + and - buttons that increase or decrease the brightness of the LEDs in small increments. It has a Mode + and - button that allows you to select different flashing patterns of the lights. It has several patterns to choose from, and there are Speed + and - buttons that increase or decrease the duration of the patterns. I have not used these Modes much, but from what I've tested, it has a normal strobe mode, a 3-flash then pause mode, what seems to be a simulated "lightning" mode, and more. I may utilize this more when I make a new Halloween display I am thinking about! This set was my first time at working with LED strip lights in a craft project. I was completely uneducated with how to wire different lengths of cut LED strips, but after purchasing this and some other connector options, I am excited to do more with them! For my first project, I created a shadow box replica of an old Drive-In Movie Theater that I went to as a kid. I wanted to light the sunset behind the theater screen and tree cutouts, and light the inside of the screen to illuminate the interchangeable movie scenes I printed out. The picture is not great, but you can see how it turned out. (It looks better in person...). I used a strip of 6 LEDs to illuminate the sky, and a strip of 3 LEDs to illuminate inside the movie screen. I connected the two using the ZITRADES 8mm 2Pin 10Pcs LED Strip Connectors I bought off Amazon, and splicing the wires together using electrical tape. I then used the included power supply connector and adapter with the remote control to give it power. So far, so good! I would recommend this LE light kit, and LE lights in general. I have purchased this, warm white, and blue LEDs from them, and they all look and work great!

I bought these in 2020, it's 2026 and they're still working great. The lighting is amazing and bright.

The light itself is good. It’s bright, the daylight white looks clean, and the dimmer works smoothly across the full range. But the strip is much more fragile than I expected. It snapped clean in two when all I did was peel off the small product info label stuck to it, before I had even started installing. Since it has to be handled during setup anyway, that’s a real problem. If you buy it, peel anything off very slowly and support the strip as you go. Good value if you’re careful, but the durability needs work.

I installed this kit under the hutch on my desk at work. The area under the hutch was quite dark, so I installed the LED strip along the front edge so the it was hidden by the door. The kit puts out a lot of light, and it made a huge difference to my desk, I'm extremely pleased with the results and plan on installing more of the light strips. Installation was super easy. First you identify the area you want to stick the tape to, then clean the surface with soapy water and wipe dry. Then figure out the length you need and cut to size with scissors. Next, you peel off the backing tape and stick the strip to the surface, making sure the put pressure on the whole length for good adhesion. Lastly, you plug one end of the white cable into the LED strip and the other end of the white cable into the power inverter. Then just use the remote to control power, brightness and flicker mode. This LED strip gives off a warm white light that I prefer and is so bright for my application that I usually leave it at 50% brightness. I had compared this kit to other LED light kits at local stores and this one was one third the cost, so it's a great value.

Great item. Works exactly as advertised!!

Decided to use LED strips as lighting in my small livingroom and decided to try these LE LED Strip Lights, 16.4ft 12V Dimmable Strip Lights, 6000K Daylight White, 300 Units 2835SMD LED Tape Light for Home, Non Waterproof, Power Adapter Included found here: https://www.amazon.ca/gp/product/B00MHLIFO8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 This was a little of a test as I never really player around with LEDs very much, I bought 2 while they were on sale, both little boxes came in one amazon box without wrap or anything, both work fine all LED are good. I am thinking of getting a channel with diffusing cover to put along the ceiling and these strips inside them, it should work fine since they are so bright. I got this white only dimmable strip as it mainly to replace lamps since there is no native ceiling lights in this livingroom. For now I just stuck the LED strip right to the stucco ceiling and they are holding on just fine though I did add a piece of packing tape (wide scotch tape for packages) to hold the dimmer in place in the corner which takes weight off the sticky strip behind the led strip. For the sticky strip while it sticky enough if you are not careful when peeling back the back paper you can actually pull the sticky right off the strip, it was fairly easy to tap push it back in place. That's why I gave the adhesion 3 stars for this issue I had. That said if you stick it to a plain flat wall it should stick really well and you could most likely lose some paint when pulling them off. For my stucco ceiling however is was pretty good! I included a small video to show how bright these are, looking forward to next year when I repaint the whole apartment as I will more than likely add in some LED strips here in there as pure white lighting and RGB music reactive one's in some places. These btw should work well with led channels as they are so bright! Will update if I have issues but if these last say one or two years I will be very happy considering that these in the video is only one roll of 16.4 ft and cost under 20$ CAD. Channels like this should work fairly well: https://www.amazon.ca/dp/B072MGVK9F/?coliid=I2PGLJA1HW4YMS&colid=1QRZZHRWEM46D&psc=1&ref_=lv_ov_lig_dp_it The power supply wire and more importantly the dimmer wire should be longer. For a nice set up you ideally want more reach for the dimmer so you can control better where the leds themselves start, would have been nicer if the led were only along the ceiling instead of coming down the corner like you see in the video but that not possible as is due the the dimmer wire being so short. btw there was no remote control with these ones.

These lights were exactly what I needed. They were quick to install, and I love that they use a dial instead of a tiny remote—those never seem to work right for me. The brightness is super easy to adjust and the daylight white color is perfect—not too yellow or too blue. I paired it with a wireless outlet remote so I can turn the lights on and off without reaching for the dial. It’s a great setup for my trailer bedroom, where the ceiling lights are too harsh at night. These create a much nicer vibe, and I actually enjoy hanging out in the room now.

Good