Mophorn Milling Vise 4"/100mm,Bench Clamp Vise Nodular Cast Iron Material,Clamping Vise Clamping Force 19KN Max, Milling Machine Vise

I bought this vise for a mini-milling machine. I have used it and found it to be well made and accurate enough for a home hobbyist like myself. It closes squarely and operates smoothly. Because I use this on a mini-mill space is critical I like the ability to remove the handle. This is a very minor issue, but I would recommend that you take a file to the top corners of the jaws as they were left sharp after grinding and are a knuckle skinner, this will not affect the function, but it will save your fingers. For the money I feel this vise is well worth the investment.

This vise works great, but tends to rust so make sure it's protected with oil.

Works well, but a lot of overhang when mounted perpendicular on a mini-mill. Raw metal so be ready to spray it down to protect from corrosion. I found the little feet were too thick for my mini-mill so had to cut them down. Very accurately made, better than most.

...which is what I got it for. I'll be attaching it to an angle plate so I can hang it over the bed on a bridgeport and work on the ends of long parts. Only the jaws are hard, so it is going to wear out quickly. Also, the screw threads are some of the worst I have ever seen, and will do a great job of filing away the threads in the nut.

Great vise for the value.However the seller is misleading and did not signify that this is a VEVOR vise. You can buy this vise from Vevor right now for $20 cheaper.

This is a nice little vise for the money, but after I cut myself moving it, I noticed that nearly every edge on the thing was sharp, i.e., not eased at all (hence the 4 star rating). Where a ground edge meets a casting edge was particularly nasty. The vise is definitely worth buying, but be prepared to spend some time making it safe to handle.

I put this to the test and I was able to hold .001

Great little vice, bought this for an xy table I added to my drill press. If you do this keep in mind this does not come with a clamping kit you will need to buy your own depending on the t slot size on your table.