KSP 25mm（1"） Tacoma Wheel Spacers 6x5.5 Bolt Pattern, 6x139.7 to 6x139.7 Hubcentric Spacers Compatible with Toyota 4Runner Fj Cruiser Tundra 6 Lug Wheel, 4pcs Aluminum Tire Spacer with 106mm Hub Bore

Worked great on my 2019 tacoma trd sport 4x4

Espaciadores de 11/2” para FJ CRUSIER , muy buenas están instaladas hace 3 años y todo bien

The spacers fit perfect on my 2016 Toyota Tacoma Sport, no vibrations you can't even tell I have them on except the wheels set out one inch more than they did which with the 2 inch lift makes the truck look great.

Mated up perfectly. Lugs didn’t protrude past spacer, and fit to the hub with ZERO play, amazing fit! The spacer lugs seemed a bit long, but the lugs had plenty of room to torque down perfectly. It even comes with more red loctite than you’ll need, and that stuff ain’t cheap. I was able to take a 10 dollar tube back to the store! The lugs were proper 10.9 bolts with the KPS logo on them, and the machining and finish on the spacer was perfect. You could spend 129 for 2 spacers, or get 4 that are every bit as good for 100!

Was on the fence about getting spacers being that they are spacers, but after some research and digging I discovered these KSP 1in. Reputable sites sell these so figured I’d give them a try after seeing the only difference In spacers and specs was brand name . So far so good and no issues, if you know what your doing or know someone who does there shouldn’t be any issues following the instructions. I needed to clear the front control arm after putting 285s on the stock rims (also 3in lift). Ride isn’t bad considering the mods. Doesn’t hurt the stance either. For now 5 out of 5

This fit perfect on my 2005 Tundra 20x9 KMC wheels.

I ordered these hoping they would fit my 2015 4Runner. I typed in my vehicle and Amazon indicated that they would fit. These are the 1 inch spacers. The original studs on my vehicle protrude past the outside of these spacers. I am having to order the 1.25 inch, in order for the studs to clear the outside of the spacer. They look great and I’m sure they would work fine…just not on a 2015 4Runner.

These have worked great and they even look cool in the blue color. Unfortunately the purpose for buying these for me was to prevent the rubbing of the tires on the upper control arms when turning sharply. These helped with that but not completely. I think I’m going to have to blow torch the nuts off on the front two spacers to loosen the red loctite and get ones that are 1.25” or maybe 1.5” to be safe. I have the standard wheels for my 2009 TRD sport with 285 K2s.