YEAPOOK Handheld Digital Mini Oscilloscope 5012h Portable Professional Oscilloscope Kit with 100mhz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display

Q: What is the battery life like? does it use usb charging?

It does charge through the USB port. I don't have a specific battery time, but I would rate the battery life as good.

Q: What is the more realistic bandwidth with reasonable accuracy, e.g. +/- 5% or better?

+/- 5% is probably asking a lot. But I found it to do maybe +/- 10% in many tests (except at 200 mV/div where mine seems to have a vertical gain error quite a bit more than that). Frequency-wise, the answer is basically around 20 or 30 MHz for sinewaves and works well at timebases of 100ns/div or longer. At a timebase of faster than 100ns/div, it appears to enter a software-assisted/based triggering/display mode that struggles with some waveforms. At 100ns/div or longer, it works very nicely (although it will alias if you are on a timebase setting that results in more cycles than the 320 width display will support). So I would say 20 or 30 MHz sinewaves (maybe 1 to 5 MHz for digital waveforms that have lots of harmonics if you want sharp edge displays). If you push it, and have a pure sinewave signal, you can get it to show stuff up to about 125 MHz before aliasing starts at the 6ns/div setting, but the vertical readout will be no-where near 5% accuracy.

Q: Is it easy for a newbie to use vs something like nscope ?

I am not really a Newbie since I have been a "Ham" radio operator since the 1950s, but I have found this unit quite easy to use. The controls are very self explanatory and, although sometimes the manual is a little confusing, if one takes their time reading it they will get the answe in using the equipment. I like mine and use it frequently.

Q: What is max. freq. of circuits this scope provides useful/predictable results? 200khz? 400khz? some reviews say >that is squirrely.

It works very well up to about 20 or 30 MHz. Above that, you'd be using a timebase setting below 100ns/div and it goes into a software-based triggering/display mode and can have a few issues. Limited memory depth means that it will alias, depending on input frequency and timebase setting. For example, at 100ns/div, it aliased for input signal components above 31.25 MHz in my tests. At 10us/div it aliases above 1.25 MHz. Etc. BUT - if you just hit the "Auto" button, it quickly and accurately showed just about anything I threw at it :-) Good little scope !

4.4/5

معرّف المنتج: 357330382

معاملة آمنة

يُشترى معًا بشكل متكرر

YEAPOOK ADS5012h Handheld Digital Portable Oscilloscope Mini Storage Oscilloscope Kit with 100MHz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display

EEEEE 30 Value 300 pcs Multilayer Monolithic Ceramic Capacitor Assortment kit 10pf－10uF Individual Box Lid pf nf uf (300 pcs)

ALLECIN LM358P LM358 Dual Operational Amplifier IC Om-Amp DIP-8 (Pack of 50pcs)

الوصف

YEAPOOK Handheld Digital Mini Oscilloscope 5012h Portable Professional Oscilloscope Kit with 100mhz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display