Cable MattersCombo-Pack 48Gbps 8K Right Angle HDMI 2.1 Adapters with HDR, Supports 8K@60Hz / 4K@240Hz, 270 Degree and 90 Degree HDMI Adapter Male to Female, Black

With a new wall-mounted flat screen TV with three HDMI inputs (two inputs, one eArc output) I wanted to run all of the HDMI cords behind the wall. I used a single 3-port HDMI wall plate behind the TV and a 3-gang wall plate with a 3-port insert behind our entertainment center. The wall I mounted the TV onto was on an outside wall. The insulation was packed right against the drywall, so ordinary HDMI cord connections would have been a little too deep to use. My original thought was to use three of these on the backside of the 3-port wall plates, however, these were too wide to use two of these 90 degree adapters next to each other with the two different HDMI 3-port wall plates I was using. The HDMI ports I was using had the ports tilted at a 45 degree angle. We had to buy adapters that bend 90 degrees flat (the other 90 degree bending ones) on the center port to clear the other HDMI cables behind the wall ports.However even that proved to be a bit of a problem because you can't connect that contraption and fit it behind a single width wall plate hole. We ended up not using the 90 degree adapter on one of our single 3-port wall plates and just plugged an HDMI cord directly into it. Pushing on the insulation was the lesser of two evils. I wasn't going to cut a larger hole into the drywall just to have to repair it later.I wouldn't knock this product a review point for the size problems when using on a 3-port wall plate. But if you are planning on a similar project, just know that you might have better luck with the other shaped 90 degree adapters, or if you mount your TV on an interior wall, you may not even need to use these behind the wall.These work great. For some reason, one of the HDMI ports on the back of our flat screen TV goes straight out to the wall. With a normal HDMI cable, it wouldn't have fit, but using one of the "spare" adapters, it solved the problem. They seem to be HDMI 2.1 compatible.

My mouse being on the same side of my laptop than my HDMI port, I needed an adapter to be able to remove the HDMI cable that was on the way, blocking my mouse's movements. This set provided a great way to do remedy to this issue.There are two adapter in the package, which have two different 90° angle: One that will bend up, and one that will bend down. So, they are not the same. I used the one with a bend up, which was exactly what I was looking for, and saved the other one for a future use on something else when needed.

did exactly what i wanted it to do with no issues

Good Quality and good value. They were a little tight for my use but that isn't a bad thing.

I use the client's monitor when I teach, connecting to my laptop using an HMDI cable to bypass their network. Also to use motel's TV. No more awkard or impossible connections.

I bought these adapters (came with 2 adapters with alternating directions; see pics; $7.99 USD; Feb 2023) for my new Small Form Factor computer which needed them. I can confirm that they are capable of atleast 4k at 120hz. The build quality is good, nothing to note there. They're the perfect size for what I am using them for. I would recommend this product.

I needed this for a laptop installed in a retro gaming arcade case. the laptop had only milted clearance on each side and the HDMI cable connectors were just too big. This allowed the cable to make a tight turn and come down below the laptop and route out into the lower portion of the cabinet. I was looking for one with the smallest horizonal distance. (out from the laptop port). There were many that were short in the other direction, but I needed this to come out and down in as little space as possible. This did the trick.It's a two pack, One goes one way, one the other. Still worth it to buy two and only use one when I didn't know what would work out the best. Time savings was worth it. Of course now I have to build some expensive project to use the other one, so maybe the cost savings was not long term. :-)Worked out great in the end. You can see the connector in use in the 2nd pic and the third shows why it was important.

These right angle adapters help make a superior connection between the HDMI cable and my sound bar, eliminating compression stress on the cable from pressing on the wall behind the bar. This also eases installation of the sound bar.