Rocaris 10 Pack Flap Wheel, 120 Grit for Rotary Tools，1/8 inch Shank (32X10X3)

There's not a lot to say here. Either a flap sander works, or it doesn't. In this case, it works and it lasts. I'm a wood carver and a spoonmaker. I was able to sand 15 spoons with only 1 flap sander, so I'm very impressed with the durability, and I will buy it again.

A real handy item when you need to sand or grind in tight spaces!!!

they do what they are supposed to do. they are cheap and disposable. they dont last overly long, but as cheap as they are, it doesnt really matter

Use your favorite motorized tool to get the sanding done. Read the specs

DESCRIPTION: This is a set of ten abrasive flap wheels, intended for use in hand-held motor tools such as a Dremel brand. The dimensions are 32mm (overall diameter) x 10mm (width of individual flaps) x 3mm (shaft diameter).---------------POTENTIAL USAGE:I used this product as intended, in a hand-held Dremel tool. It worked as expected on wood and metal surfaces. As with any powered abrasive tool, it sheds a lot of specks of abrasive, so proper personal protection is essential for safety. I generally work under a plastic shield, but I removed the shield for the staged photo.The 1/8" (3mm) shaft also fits in a stationary drill press for constant medium-speed use. This worked well for smoothing edges of wood pieces.The shaft also fits in a portable cordless screwdriver for slow or variable-speed use, and would work well for irregular surfaces such as automotive panels, deburring pipes, or in locations without AC power. Since these tools are reversible, it is important to be sure the flap wheel is turning in the correct direction (as if you were tightening a screw).---------------MY USAGE:I primarily use these for polishing and brightening the wheels of model train locomotives. These wheels must be kept spotless as they provide the electrical connection to the locomotive. While holding the locomotive in a cradle (see photo) I could easily address the wheel surfaces using a light touch. I had previously used a little wire brush wheel for this purpose, but that was a bit too aggressive for this use.---------------Note the online listing for this product specifies 120 grit in the description, but 80 grit in the illustration; so not sure which is correct.