معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
4.8-ML. SYRINGE FORM-A-THREAD STRIPPED TH (Package Size: 1)
| Brand | Loctite |
| Material | Epoxy Resin |
| Compatible Material | [Mi] Multiple Materials (Not Specifiable Based on Given Info) |
| Item Form | Liquid |
| Color | Clear |
| Item Package Quantity | 1 |
| Package Information | Syringe |
| Item Volume | 4.8 Milliliters |
| Viscosity | Moderate |
| Water Resistance Level | Water Resistant |
| Unit Count | 1.0 Count |
| UPC | 079340286542 |
| Number of Pieces | 1 |
| Manufacturer | Loctite |
| Part Number | 44228654 |
| Item Weight | 2.24 ounces |
| Product Dimensions | 8.6 x 1.3 x 5.5 inches |
| Item model number | 236382 |
| Is Discontinued By Manufacturer | No |
| Batteries Included? | No |
| Batteries Required? | No |
R**R
Worked for my application, may work for yours.
7/16-14 thread repair on tension side of an aluminum transmission case mount. Lower 8 of 12 threads were damaged. I do not typically us products like this and usually drill and tap to next size or heilcoil. Thought I would try this product as an experiment. Followed instructions but allowed re formed threads to cure for 24hrs. Rated torque on product for 7/16-14 fastener is 129 Inch pounds (about 10.5 ft lbs) Transmission mount torque spec is 35 ft lbs. Installed mount with 7/16-14 bolt and step torqued to 35 ft lbs in 5 ft lb increments. Bolt torqued to spec and threads held. May have benefited from using full length bolt and the 4 remaining good threads at top of bore. So far so good. I do not know if this product will still perform if the bolt would need to be removed and reinstalled to torque spec. Thumbs up for now, if it fails I can still re size to next size up for a M12-1.75 or heilcoil for a 7/16-14.
F**O
Thread Release Agent Bottle was empty!
I paid $48 for the bottle of the release agent, the other parts of the kit are just epoxy. When I finally needed to use it the bottle had leaked and was completely empty. The cap was tight. A poor design from Loctite Henkel. Bottom left of the first photo shows the blue & red stain. I am past the return window and the auto parts stores don't sell this product. I have used it in the past and it worked as advertised.
B**K
Great Stuff. 👍
I worked for Kodak for 32yrs. In an R&D shop you have times where you need a quick fix. Loctite product’s are the best.😎
E**D
This product is not intended for high heat applications.... Temperatures above 300 deg Farenhiet .
I wasnsn't able to use this time as I was working on an Exhaust Manifold. I have used this product before and was very impressed with it. I will use another day on something else.
P**P
Works!
This stuff works great! Used it on my Volvo to fix the threads on the nut plates that hold the skid plate on. Highly recommended!
C**S
It works as advertised!
Great product.used on heater hose fitting where the aluminum threads stripped. No leaks
T**T
Thread repair kit didn’t work.
Unfortunately this product didn’t work. I followed the directions as described and tried it three separate times. I’m not sure if this product has a shelf life or not, but I wouldn’t even suggest trying this in on stripped thread on a motor. I tried to fix a stripped thread on my dirt bike where I drain the oil. I cleaned the hole with contact cleaner and dried it thoroughly, so I’m not sure what happened. Total waste of money and my time..
K**A
Recomendable
Excelente producto
ترست بايلوت
منذ أسبوع
منذ شهرين
