1/2 inch PVC Splitter with Brass Mist Nozzle (Pack of 10)

Having purchased several of the pre-fab tubing-nozzle mister kits, these are the ideal solution. Since they are united with a standard 1/2" PVC Sprinkler Coupler, you can buy the 10 or 20-foot 1/2" PVC Sprinkler Pipes and design the perfect system for your patio or enclosure, whether it is covered or not. We have both. One is a large Patio with the Roof as an overhang, and another is an area in the center of the patio with a canopy and frame. Since these fittings are universal, you can space them out at the ideal distance for your scenario.. I would recommend making a prototype by using a GHT (Garden Hose Thread) to 1/2" PVC Adapter, a length of tubing, the nozzle mister connector and a nipple and cap. Don't cement these together, just twist them tight and use them to see how far each nozzle sprays based on your individual water pressure. That way you know, roughly, how far apart to put each nozzle. I use standard pipe hanger clamps (the little galvanized, curved straps with a screw hole on the flat part) to affix my system up under the eaves, just inside the roofline so the mist can dissipate before hitting the ground and the system itself stays healthy, out of the sun, so it will last forever (or at least a really long time). It's amazing how much cooler it is sitting in our lounge chairs with the system turned-on. A perfect solution to my frustration with the pre-built kits. Thanks.

Easy to install, when glueing pvc pipes into couplers be sure not to cover the hole where the mister goes in. I learned that when this happen on two pipes, had to drill it out. After that, they work great.

I am updating my review based on my customer service experience. Vendor was quick to reach out and offer/provide a full refund as well as offer tips to ensure system was set up properly (e.g., need to ensure 40psi water supply, flushing the nozzles prior to gluing, etc. - information that would be useful to include in their product description/instructions). I'm still disappointed in the product performance but the vendor stepped up to correct the sales experience.Don’ waste your money. I bought these wanting to make a PVC misting tent for the 4th of July. When they arrived I cut and glued all the pieces and after allowing the glue to cure hooked it up to the hose for a trial run. Not a single nozzle worked properly. All had a mixture of misting (desired) and 2, 3 and sometimes 4 solid water streams shooting out. Unless you are looking to make a sprinkler instead of a mister - LOOK ELSEWHERE.....

These DO fit 1/2 inch pvc pipe. LOVE that the nozzles are in place but double check that they are not “just started”. Just because they are started doesn’t mean they are all the way in place. One flew off right away!

Tapped into my sprinkler system to feed these misters. Only have 6 connected to cool down my dogs. Initial setup, one was just shooting water stream, no mist. Removed a great from another piece and it leaked out of the base. Cut out and replaced. After a few days another one started dropping from the base. Overall, they are ok, just need a lot of extra heads when they are bad.

Built an elaborate misting system to turn on and find that almost all the PVC screw holes were bored poorly and nearly all the mister to PVC connections were leaking horribly - the cheapest part was messed up. Had to take misters off and use teflon tape to create a leak proof connection. The heads tend to plug up quickly too despite my filtration attempts. I also bought Orbit PVC misters and had zero problems. Please buy the Orbit product instead and save yourself the headaches.

For barely the price of a bag of nozzles these couplings are an excellent value. One or two lengths of half-inch schedule 40 PVC and you have an awesome misting station

Seems to be well made and has worked great so far. Easy to adjust with my spray settings and has a nice stream. And it is easy to attach to water hose east to adjust pressure perfect!