VESA Mount Adapter Bracket, VESA Adapter Compatible with Acer Monitor R240HY bidx, R221Q, R271, SB220Q, R241Y, RT240Y, RT270, SA220Q, SA230 bi, SA240Y, SA270 Bbix, SB230, SB240Y

PLEASE ENSURE IT IS FOR YOUR MONITOR! If you pick the correct one it works amazing! Super sturdy and secure! I ordered 3 for my setups current monitors and they are so simple to install. They fit right into where the original stand/leg detached, and it comes with several screw options to fit your mounting arms.

The hardest part of the installation was fitting this bracket to the monitor! Gently, but firmly slide into monitor. Be careful as tolerances are ⁷very tight. Make sure it's all the way in!!! Once it's connected to the monitor, mount it to the arm of your choice with the same 100 x 100 VESA pattern! Works well and was easy to install!!! Very well made!!!

Used it on my cheap SB220Q bi since it didn't have that mounting system needed to be attached to monitor arms. It works perfectly with my set up. Only issue with this that I see is that you are not able to turn the monitor sideways as the mount isn't directly screwed onto the monitor. If you try this, good chance your monitor will slide out. Not a problem for me though since I have mine right side up.

I used these to mount a pair of Acer SB220Q bi 21" monitors. They are solid and well made, and worked fine, but a couple of things to be aware of: 1. The bracket adds 2 1/4" of depth to the back of the monitor, so if you're using a wall mount, you have to add that 2 1/4" to the depth of the wall mount itself to see how far out your screen will stand out from the wall. If you're viewing the monitor with the wall mount extended, this of course doesn't matter, but if you think you're mounting your screen flat up against the wall, think again. 2. The supplied screws are small, have small heads, don't include washers, and may not work if your VESA mount has bigger holes. I used the longer M4 screws with bigger heads that were included with my Mounting Dream wall mount, along with bigger washers. 3. Be aware that the center of the VESA mount will end up well below the center point of the monitor itself. In the case of the SB220Q, the VESA center point is 9" below the top edge of the monitor. It's not a problem if you correctly calculate the location of the holes to be drilled for the wall mount. 4. This bracket doesn't screw attach to the monitor - it is a 'slide in' type mount which mimics the geometry of the Acer-supplied base and snaps into place. The stabilizer doesn't attach to the monitor, it just holds the back of the monitor in place. Thus, it can be a little wiggly. I blame Acer for this for not providing any screw holes that could be used, and for not providing VESA mounting holes in the first place, which would have avoided all of this.

Exactly what I was looking for, I purchased this for the Acer model SB230 manufactured in Sept. 2018. At first I wasn’t sure it was the right one because I was confused on how to take the stand it came with off, but once I discovered after a quick Google search that there are plastic retaining clips that need to be pushed in to slide the metal part of the base mount off things went much more smoothly. The stabilizer attachment has been great too, keeps my monitor from wobbling all over the place when my cat jumps on the desk. Perfect fit, easy install and great quality.

Works as advertised for my Acer SB220Q monitor.

Got a great deal on a monitor, but didn't realize it lacked vesa mounting. I really didn't want to return as it was a great monitor. When I found this, I was a little skeptical about quality and fit. But after receiving it, I had it attached to the monitor and the monitor mounted on my dual monitor stand. Glad I found this!

I ordered two, the first one was superb and fits the bill very well, it is a very strong adapter and I have yet to see a single issue with it. The second somehow arrived with a bent bracer screw. This definitely occurred prior to shipment unless someone opened it up and purposely bent it with a vice in transit.

Compatible avec le R271, de bonne facture.

Works great with my Acer monitor and my adjustable arm. Would not use it at 90 angle, as it's a push fit and might fall out. But monitor in landscape is fine.

Works well with my Acer G227HQL, i guess i'll have to be cautious when manipulating the screen because the metal pieces of the adapter are welded!

I used two of these to mount my Acer G257HL screens, Installed quickly and easily and fit perfectly> The ywere alo supplied with optional stabilisers to helps keep the screens rigid on the mount.

Excelente adaptador, me sirvió para colocar mi monitor acer en un soporte vesa